Special repairs to Bldg No. HT 73 and 74 under GE North Ambala Cantt

Amount

SCHEDULE A PART I (B/R WORKS)

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Supplying and Fixing for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet (SINOSUIDAL PATTERN) 0.50mm thick, conforming to IS-15961 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965.

Supply and fixing for pre-painted galvalume, aluminuim zinc coating, GI based Plain steel sheet, 0.50mm thick, of any colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.

Material and labour for taking down roof trusses, coupled rafters or trussed beams, clear span above 4 metres and upto 8 metres complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position, framed work complete all as specified and as directed.

Supply and fixing roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (web, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed in position, conforming to Fe-410(Gde 250), complete all as specified and as directed.

Supply and fixing mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe-410(Gde 250), complete all as specified and directed.

Supply and fixing of mild steel rag or lewis bolts, purpose made, with hexagonal or square nuts and washers, screwed at one end and the other end enlarged and jagged or lewised, exceeding 30cm long and 12mm dia of neck complete all as specified and as directed.

Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Material and Labour for Brick work with sub class ‘B’ bricks (Except Bricks), straight or curved on plan exceeding 6 metre mean radius, built in cement mortar (1:6) complete all as specified and directed. ( Note- The serviceable bricks obtained from Serial item No- 1.09 will be used after removing motar, cleaning the bricks with water, etc.)

Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Material and labour for rendering 15 mm thick on surface of any description of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement all as specified and as directed.

Material and Labour for 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar 1:4 mixed with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete, all as specified and as directed. (Note : WPC shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls and applying two coats of acrylic distemper using roller over a coat of 2mm thick wall care putty complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls and applying two coats of apex paint using roller over a coat of approved primer and over 2mm thick wall care putty complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work including cutting of steel reinforcement as required to facilitate demolition and removal the rubbish/ demolished material outside defence land, complete all as specified and directed.

Material and Labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in fixing of hold fasts, copings, bed plates,kerbs or mud stops, lintels upto 1.50m span, plinth courses , seismic and other bands and the like, finished the surface fair and even, including necessary form work complete all as specified and as directed. Note- If reinforced concrete, reinforcement shall be measured and paid for separately.

Material and labour for mild steel round bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Gd I, IS-432 Part-I complete all as specified and directed.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Supply and fixing of steel window box type, with side hung shutters, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skeleton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 and TD-220 sheet 1/3 to 3/3 and applying two coats of approved colour synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings including painting (iii) Glazing, wire mesh and painting shall be measured and paid for separately.

Supply and fixing mild steel framed work as in door frame/chowkats, gate of angle or other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides) and hanging also fastening and fixing complete all as specified and as directed.

Supply and fixing IInd class (hollock) factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

Supplying and Fixing for factory made 35mm thick, 2nd class HW, plain framed, panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. (Note: Pattern of door shall be same as that of existing doors.)

Supply and fixing of sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple and including fixing with beads supplied with joinery when fixed in panels of joinery, complete all as specified and directed.

Supply and fixing of 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing of 125 mm long, aluminium handle, cast type, anodized, ISI Marked complete, all as specified and as directed.

Supply and fixing 300 mm aluminum sliding door bolt, ISI marked with hasp, staple (bolt type) , stove enameled black, with bright clamp bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple, complete all as specified and directed.

Supply and fixing mild steel helical door spring 150 mm long fixed with screws to wooden chowkhats or welding to steel chowkhats, complete all as specified and directed.

Supply and fixing of mild steel cold rolled butt hinges, 100 mm long, medium weight and fixed complete all as specified and as directed.

Material and labour for new or preparation of previously untreated steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for new or preparation of previously untreated wooden surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards, slabs, blankets, any thickness, including cover fillets complete all as specified and as directed.

Supply and fix for anodised aluminium snap grid frame work for false ceiling, 605mmx 605mm, including hanging arrangement, snap grid consisting of aluminium main/cross tee of size 36.5mm x 25mm x 1.4mm weighing 0.24kg/RM and 23.5mm x 26.4mm x 1.40mm and snap grid fixed to ceiling with supporting hanger consisting of 4mm dia GI wire with necessary bolts and nuts and junction/ cross with angle size 15mm x 15mm x 1.5mm fixed with suitable arrangement including 12mm thick perforated gypsum board fixed in aluminium snap grid with hold down clips in ceiling complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including floor tiles, screed bed etc complete all as specified and as directed.

Material and Labour for vibratory compacted, precast cement concrete, coloured (other than grey), rubber moulded , interlocking designer paver blocks( double glossy) in any and shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade in path, hard standing, etc. laid over and including 50 mm thick screed or bedding layer of sand over 75mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregates complete, all as specified and as directed. Make- NTC/NITCO/SURYA'K'

Material and labour for premium quality, joint free, anti skid porcelain coloured tiles (Square/rectangular), area of each tile exceeding 0.18 sqm and not exceeding 0.36 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the tile colour complete all as specified and directed.

Material and labour for premium quality, joint free, anti skid porcelain coloured tile, 7mm to 8mm thick, of same description and length as of floor tile but 150 mm height on vertical surfaces of walls including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified and as directed.

Material and labour for premium quality, non skid, coloured ceramic tiles, area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, laid in floor, over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the tile colour complete all as specified and directed.

Material and labour for premium quality, glazed coloured ceramic tiles of size 450 x 350 x 7mm thick or 350mmx250mmx7mm thick, on vertical surfaces of walls over and including 10mm thick rough finished plaster in cement mortar (1:4), set, jointed in neat cement slurry and pointed in coloured cement to match tile colour complete all as specified and directed. Note:- Size of tile shall be cut as required.

Material and labour for granite work (of any type), 18-20mm thick, as in steps, jambs, pillars, window cills, cooking platforms, and table top wash basin/counter wash basin, machine cut, laid on and including 15mm thick bedding layer in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement using marble dust with admixture of pigment to match the shade of granite stone including rounding of front edge and including taking down the existing slab of any type complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate), 50mm thick, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Supply and fixing in repairs of MS powder coated decorative curtain rod, 20mm dia, fixed with decorative brackets, stop roller and finials at the end including taking down of existing unserviceable curtain rod of any type and pattern complete all as specified and as directed.

Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends oredges of landings, steps, cills, s[mshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth complete all as specified and as directed.

Supply and fixing of PVC connections, 450 mm long and 15mm dia with brass fly nuts and PVC washers on both ends complete all as specified and directed.

Supply and fixing of PVC (SWR) vent cowl for 50mm bore pipe complete all as specified and directed.

Supply and fixing 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

Supply and fixing in repair, 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete, all as specified and as directed. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534)

Cutting into existing manholes for connecting new drains, and making good to pipe and rendering, cutting out existing benching for and forming branch channel( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 (using 20mm size crushed stone aggregate) smooth finished and reforming benching as required of pipe 100 mm dia, complete all as specified.

Supply and fixing in repair, PVC floor trap, 100mm size, with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

Supply and fixing in repair, water storage tank of 1000 ltr capacity, HDPE double layer, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore, including taking down the existing unserviceable water tank and removing from site complete all as specified and directed. Note:- Make of tank shall be engraved on the tank.

Supplying and fixing (in repair), bib tap screwed down high pressure, cast copper alloy,fancy type, long body,chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union, complete all as specified and as directed . (Make : ESSCO Cat No MQT-512 or equivalent model in makes mentioned in Appendix 'B' of tender document ) Note- Contractor will submit to Engineer-in-Charge a guarantee certificate from manufacturer before claiming payment.

Supply and fixing (in repair), 15mm bore pillar tap, chromium plated cast copper alloy, ISI marked, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks, complete, all as specified and as directed. (Note : Weight of pillar tap shall not be less than 0.665 Kg) Make-ESSCO Cat No ES-507-A or equivalent model in makes mentioned in Appendix 'B' of tender document . (ii)Contractor will submit to Engineer-in-Charge a guarantee certificate from manufacturer before claiming payment.

Supply and fixed (in repair), stop valves, 15 mm dia pipe, chromium plated, fancy type, ISI marked, screwed down, high pressure with capstan head, (concealed type) with long shank, screwed both ends for iron pipes or for unions, complete, all as specified and as directed. Make-ESSCO Cat No ES-514-A or equivalent model in makes mentioned in Appendix 'B' of tender document . (ii)Contractor will submit to Engineer-in-Charge a guarantee certificate from manufacturer before claiming payment.

Supply and fixing of brass chromium plated tubular towel rail (finish Glossy), 20mm dia, D type, 60cm long between flanges complete all as specified and directed. Make- PRIMA Cat No PDX -4501 A or ESSCO Cat No-1111 or Prayag Cat No. BA-20 or equivalent model in makes mentioned in Appendix 'B' of tender document. Note- Contractor shall submit a guarentee certificate for tubular towel rail from manufacturer to Engineer-in-Charge before claiming payment.

Supply and fixing in repair, angle cock, 15mm dia, cast copper alloy, chromium plated, ISI marked, screwed down, high pressure with capstain head, screwed both ends for iron pipes or for unions complete all as specified and as directed. Make-Prima Art No- PSP-504-A or equivalent model in makes mentioned in Appendix 'B' of tender document . Note: Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment.

Supply and fixing in repair, vitreous china wash hand basin, white colour, with pedestal, of size 550x440mm, ISI marked, with 2 Nos.CI brackets embedded in cement mortar 1:4, PVC waste pipe, 45cms long, fixed to walls, 15mm dia PVC connections and chromium plated waste coupling, etc.,complete all as specified and directed. Make-- Cera/Hindware/Parryware

Vitreous china wash down water closet, pedestal pattern (EWC), white, with 'P' or 'S' trap, with PVC water closet seat, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connecting to existing/new low level flushing cisterns, existing/new flush pipe and drain (or out going pipe) and fixing in position complete all as specified and directed Make-- Cera/Hindware/Parryware

Supply and fixing in repairs of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, complete with PVC bend/flush pipe and making all connections including taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed. Make-- Hindware/Prayag/Parryware

SCHEDULE A PART II (INTERNAL ELECTRIFICATION)

Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area) single core flame HFFR/ZHFR(Zero Halogen Fire Retardant),PVC insulated and unsheathed stranded cable 1100 volts grade ISI-694 marked TEC and FIA approved in and including non metallic, heavy duty PVC concealed conduit not less than 20mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI flush box , inner and outer plate as required for housing modular switch and socket as per module including HFFR/ZHFR(Zero Halogen Fire Retardant),,PVC insulated and unsheathed, copper conductor 1:5 Sqmm nominal cross sectional area wire as earth continuity conductor upto common earth and connecting to common earth dolly for one light/fan point controlled by one switch. complete, all as specified and directed. Note :- Modular Switch, socket and fan regulators to be measured and paid separately) (ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only. Make of PVC Conduit- Finolex, Polycab, Kalinga Premium Make of PVC wire- Finolex, Polycab, Havells

Description all as per Srl item No.2.02 here in before but for one fan/Exhuast fan point controlled by one switch 5 Amp and fan regulator.

Description all as per Srl item No.2.02 here in before but for one 3 pin socket outlet point 5 Amp on Independent board.

Description all as per Srl item No.2.02 here in before but for one 3 pin socket outlet point 5 Amp on same board.

All as per the description of Serial Item No 2.02 above, but with 4.00 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 4.00 Sq mm size, complete, all as specified and directed.

Supply and fixing of modular switch, 6 Amps, one way, one module, 230 volt, ISI marked complete all as specified and as directed. Make: Legrand (Arteor)/ Schenider (Zencelo)/ Hager (Insista) /Indoasian (Elvira)

Supply and fixing of modular switch, 16 Amps, one way, one module, 230 volt, ISI marked complete all as specified and directed. Make: Legrand (Arteor)/ Schenider (Zencelo)/ Hager (Insista) /Indoasian (Elvira)

Supply and fixing of socket modular, 2/3 pin, 5 Amps, one way, two module, 230 volts, ISI marked complete all as specified and directed. Make: Legrand (Arteor)/ Schenider (Zencelo)/ Hager (Insista) /Indoasian (Elvira)

Supply and fixing of socket modular, 2/3 pin, 6/16 Amps, one way, two module, 230 volts, ISI marked complete all as specified and as directed. Make: Legrand (Arteor)/ Schenider (Zencelo)/ Hager (Insista) /Indoasian (Elvira)

Supply and fixing of electronic fan regulator, modular, 120 watt , 2 module, suitable for ceiling fan, any type/make/sweep complete all as specified and as directed. Make: Legrand (Arteor)/ Schenider (Zencelo)/ Hager (Insista) /Indoasian (Elvira)

Supply and fixing of ceiling rose surface bakelite 65x50mm, 2 to 3 terminals complete all as specified and as directed. Make: Anchor/Fine/SSK.

Supply and fixing of lamp holder, insulated body, with back plate for angular batten fittings with one PVC block of size 75mm x 75mm for mounting the fittings with and including one LED 9 watt lamp complete all as specified and as directed. (i) Make of Lamp Holder: Anchor/Fine/SSK. (ii) Make of LED Bulb : Siska/Philips/Halonix

Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity 10KA, 'C' curve 6 to 40 Amps, ISI marked including taking down and removal of old unserviceable MCB of any capacity and type complete all as specified and as directed. Make: Siemens/ Schenider Acti 9/ Hager Nevello Plus/ Legrand/ Indoasian (Optipro)

Supply and fixing of RCBO, 2 module, 230 volts, with IP protection, with earthfault indicator and positive contact indicatior of 63 Amps capacity and sensitivity, 100mA (HI immunity) including taking down and removal of old unserviceable item of any capacity and type complete all as specified and directed. Make-Siemens/ Schenider Acti 9/ Hager Nevello Plus/ Legrand/ Indoasian (Optipro)

Supply and fixing of recessed mounted pressure die cast aluminium luminaire, powder coated, white finish, in round profile, with optimised heat shrink for efficient heat dissipation and separate replaceable electronic driver for analogical dimming suitable for 15 watt lamp including taking down and removal of old unserviceable item of any capacity and type complete all as specified and directed. Make: Havells Cat Part No. EDGEPRORDDLR 18W LED840SS, Wipro Cat Part No. LD71-161-SML-65-XX or equivalent of Philips as approved by GE.

Supply , insatallation, testing of SPN distibution board 08 way,double door , IP 43 , as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles, concealed on the wall surface including taking down the existing DB's any type and description and making good the disturbed portion with adjoining surfaces to match with existing finish, complete, all as specified and as directed. Make:Schenider/Indo Asian/Legrand/L&T.

Material and labour (in repair) for earthing complete with copper earth plate electrode 600mm x 600mmx 3.15mm thick buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to copper earth strip of 20x3mm by means of bolts, nuts, checks nuts and copper washers protected by galvanized iron pipe 15mm dia (medium grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, precast 40cmx40cmx5cm RCC cover slab in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including disconnecting and taking down of existing earthing and removing from site including testing on completion complete all as specified and directed. made out of galvanized iron or steel covered with GI pipe 15 mm dia bore and connected to main switch or main control board all as shown in electrical plate No.3 of SSR Part-I & including necessary excavation and earth work, charcoal & salt in alternate layers, 20mm dia GI pipe (light grade) for watering, funnel, wire mesh, cast iron cover and frame, PCC type C-1 earth pit, etc., including testing on completion complete all as specified and directed. " testing on completion complete all as specified and directed. made out of galvanized iron or steel covered with GI pipe 15 mm dia bore and connected to main switch or main control board all as shown in electrical plate No.3 of SSR Part-I & including necessary excavation and earth work, charcoal & salt in alternate layers, 20mm dia GI pipe (light grade) for watering, funnel, wire mesh, cast iron cover and frame, PCC type C-1 earth pit, etc., including testing on completion complete all as specified and directed.

Material and labour for taking down of ceiling fan and preparation of old painted surface of ceiling fan of any make and sweep and spray painting with two coats of white duco paint, writing MES No with black colour permanent marker including filling cavities with filler after cleaning dust, etc. and refing in same or other location including provision of three core flexible cable 23/ 0.0076 size from ceiling rose to connector of fan complete all as specified and directed. , complete all as specified and as directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade, heavy duty cable, with PVC insulated, stranded aluminium conductor, served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq.mm nominal cross section, 2 core, as in service connections complete all as specified and directed. Make--Finolex, Plaza, Gloster

Supply and fixing in repair of LED security light fittings of capacity 40 watts, made up of cast aluminium body housing with black epoxy powder coating with cover heat resistant glass safety input voltage range 170 to 270 volts, 0.95 power factor and other connected accessories including bracket made up of 0.90m long GI pipe, 32mm dia medium grade, bent to required length and fixed to wall with two clamps made of 40x6 mm mild steel flat iron 15cm long, 4 Nos 8mm dia bolts with nuts complete with all accessories, internally pre wired and connecting with 3 core copper conductor flexible cable from terminal box to the ceiling rose or connector of the light point including disconnecting and taking down of existing light fitting and removing from site complete all as specified and as directed. Make- Havells Cat Part No LHETAXU7PN6J045, Wipro Cat Part No CRLA11008HP57-05, Philips Cat Part No BRP409LED040CWHOMRFSIPSURR.

Note:- Amount of credit of Rs. 46,682.00 for retrieved materials is mentioned in Schedule of Credit Page Nos.106 & 107 of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s Vridhi Construction Co.

dhingra builders

Swami Enterprises

M/S JAISANT CONSTRUCTION CO.