REPAIRS REPLACEMENT TO INTERNAL WATER SUPPLY SANITARY ITEMS AND MAINTENANCE OF CERTAIN B/R COMPLAINTS AND CLEANING OF SERVICE WATER TANK AND REPAIRS TO CLEANING OF SEWAGE LINE AT POCKET E AT HQ SAC UNDER GE AF TRIVANDRUM

Amount

S&F in repairs 20mm dia bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

S&F in repairs 32mm dia bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipe of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipe of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F in repairs 50mm bore PVC (SWR) pipe of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F in repairs 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repairs 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Removing bib taps, stop cocks, pillar taps, angle cock etc. and refixing in the same position after repairs/replacement of washer/plunger etc. for arresting leakages complete all as specified and directed. Note: Rate of washer/Plunger etc. shall be deemed to be included in contractor quoted rate.

S&F in repairs spindle for all type of stop cock complete all as specified and directed.

Cleaning of pipes of any dia after opening of bib taps, stop cock, angle cock, pillar taps etc. and refixing in same position after cleaning of pipes complete all as specified and directed.

S&F in repairs PVC overhead tank cover capacity 250 litre including locking bolts and securing the hinges in proper position complete all as specified and directed.

S&F in repairs PVC overhead tank cover for tanks of capacity 500 litre including locking bolts and securing the hinges in proper position complete all as specified and directed.

S&F in repairs PVC overhead tank cover for tanks of capacity 750 litre including locking bolts and securing the hinges in proper position complete all as specified and directed.

S&F in repairs PVC overhead tank cover for tanks of capacity 1000 litre including locking bolts and securing the hinges in proper position complete all as specified and directed.

S&F in repairs tank connector, PVC suitable for fixing to outlet pipe of any description and 20mm dia bore complete all as specified and directed.

S&F in repairs tank connector, PVC suitable for fixing to outlet pipe of any description and 32mm dia bore complete all as specified and directed.

S&F in repairs PVC gate valve with handle, fixed both end for PVC pipe of 32mm dia bore complete all as specified and directed.

S&F in repairs PVC gate valve with handle, fixed both end for PVC pipe of 20mm dia bore complete all as specified and directed.

S&F in repairs 20mm dia bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified

Cleaning and removing all scale and dirt etc. from tanks of capacity exc 250 and not exc 500 litres and from mouth of circulation pipes etc. complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks of capacity exc 500 and not exc 1000 litres and from mouth of circulation pipes etc. complete all as specified and directed.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms . /25mm- 455gms / 40mm- 690 gms)of 25mm dia bore complete all as specified and directed.

Dismantling water tanks and removing to store exc 250 litre and not exc 500 litre complete all as specified and directed.

Dismantling water tanks and removing to store exc 500 litre and not exc 1000 litre complete all as specified and directed.

S&F 250 litre Rotational moulded polyethylene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part

S&F 500 litre Rotational moulded polyethylene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part

S&F 750 litre Rotational moulded polyethylene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part

S&F 1000 litre Rotational moulded polyethylene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs stainless steel grating square/circular of size 100x100mm or 75mm dia complete all as specified and directed.

S&F in repair flexible waste pipe of 32mm dia, any length suitable for sink, urinal and wash hand basin complete all as specified and directed.

S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe complete all as specified and directed.

S&F in repairs Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe complete all as specified and directed.

S&F in repairs Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs Health faucet, CP with flexible arm for pipe of bore dia 15mm complete all as specified and directed.

S&F in repairs angle valve brass, chromium plated fitted to 15mm dia bore pipe complete all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to pipe complete all as specified and directed.

S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Towel Ring Chromium plated including Chromium plated brass screw complete all as specified and directed.

S&F in repairs Toilet paper holder, brass CP, fitted to wall complete all as specified and directed.

S&F in repairs PVC bathroom cabinet of size 250x400mm with door shutter and looking mirror on front shutter complete all as specified and directed.

S&F in repairs glass corner shelf made out of 5mm thick glass guarded with CP guards complete all as specified and directed.

S&F in repairs 550mm long straight glass shelf made out of 5mm thick glass guarded with CP guards complete all as specified and directed.

S&F in repairs soap dish, brass chromium plated fixed to wall complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair Plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs 10 litre capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed.

S&F in repairs flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level including fixed to WC and cistern complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400 excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs chromium plated steel waste coupling of 32mm dia suitable for sink, urinal & wash hand basin complete all as specified and directed.

Repairs only to flush pipe, soil waste pipe of WC for arresting leakage by providing bushes, washers, white cement, putty etc. complete all as specified and directed.

Arresting leakage from joints between sink and granite slab by providing white cement, putty, M Seal etc. complete all as specified and directed.

Repairs only to high/low level flushing cistern and arresting leakage of its internal fittings/washers complete all as specified and directed.

S&F in repairs internal fittings such as ball valve and float for flushing cistern complete all as specified and directed.

S&F in repairs complete set of internal fittings of Cascade type EWC for arresting leakage complete all as specified and directed.

Taking down glass corner shelf, straight glass shelf from the wall and refixing after tiling work complete all as specified and directed.

Taking down bib tap, stop cock, angle cock from the wall and refixing after tiling work complete all as specified and directed.

Taking down flushing cistern of any capacity and description from the wall and refixing after tiling work complete all as specified and directed.

Taking down looking mirror of any description from the wall and refixing after tiling work complete all as specified and directed.

Taking down WHB of any description from the wall and refixing after tiling work complete all as specified and directed.

Taking down towel rail of any description from the wall and refixing after tiling work complete all as specified and directed.

Taking down PVC cabinet of any description from the wall and refixing after tiling work complete all as specified and directed.

S&F in repairs cascade type EWC of overall length 0.70m and height 0.40m including cistern and internal fittings and seat cover complete all as specified and directed.

S&F in repairs basin mixer with 450mm braided connection pipe complete all as specified and directed.

S& F in repairs brass chromium plated 3 in 1 wall mixer with the provision of overhead shower and telephonic shower arrangement complete all as specified and directed by Engr-in-Charge.

S&F in repairs telephonic/ hand shower including flexible hose and CP arm complete all as specified and directed.

S&F in repair 700x500mm mirror, 5mm thick glass mirror with double coat for protection and longevity, grounded edges for safety and silver plating on the back for better reflection complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for rendering 10mm thick on fair faces of brick work in CM 1:4 as backing coat complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F in repairs venetian blind using cotton/Nylon fabric of size 10cm wide and length as required including power coated aluminium channel, operating rope etc. all as specified and directed.

S&F in repairs aluminium weather strip with Nylon brush insert suitable for bottom of door shutters of wooden/aluminium all as specified and directed.

S&F in repairs Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each, resecuring or easing and refixing in the same opening complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, resecuring or easing and refixing in the same opening complete all as specified and directed.

Taking down aluminium and glass shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, and refixing after resecuring, making good and replacing hinges, pivot etc. as required in the same opening complete all as specified and directed.

S & F in repairs mild steel 2 lever mortice lock, vertical type 100 mm size complete all as specified and directed.

S & F in repairs Brass, 2 lever, locks, drawer, grade-I of 50 mm size complete all as specified and directed.

S & F in repairs casement stays of size 250 mm with hinged joint and two plates, with studs complete all as specified and directed.

S & F in repairs aluminium wire cloth of 0.45 mm nominal dia of wire and average width of aperture 1.4 mm, fixed with aluminium wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal/ wooden frames, glazed with putty or fixed with beads complete all as specified and directed.

M & L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

M & L for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

M & L for 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 sqm in each pane complete all as specified and directed.

Dismantling boarding including fittings, if any, any description fixed in any position with nails complete all as specified and directed.

M & L for 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work etc. complete all as specified and directed.

M & L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed.

S & F in repair aluminium die cast body door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 801 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S & F in repairs double action floor spring hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for aluminium doors openable in two directions complete all as specified and directed.

S & F in repairs floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm, anodised with hard drawn steel spring, overall length suitable for aluminium door/ wooden door complete all as specified and directed.

S & F in repairs floor door stopper of brass body and tongue, overall length of cover plate 140mm, anodised with hard drawn steel spring, overall length suitable for aluminium door/ wooden door complete all as specified and directed.

S & F in repairs butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed.

S & F in repairs butt hinges medium weight cold rolled mild steel 75 mm long complete all as specified and directed.

S & F in repairs 200 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S & F in repairs 100 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S & F in repairs aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F in repairs 100 mm long extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

S & F in repairs 150 mm long extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

S&F25mm dia decorative curtain rods powder coated MS of approved pattern / colour / design of including decorative end fittings , brackets etc. fixed in repairs.

S&F in repairs 75mm long half folded auto hinges complete all as specified and directed.

S&F in repairs Stainless steel peg rail having 6 Nos hook for hanging cloth complete all as specified and directed.

S&F in repairs aluminium plate type-II Gate and shutter, hooks and eyes 150mm complete all as specified and directed.

S&F in repairs brass wire type-I Gate and shutter, hooks and eyes 150mm complete all as specified and directed.

S&F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed

S&F in repairs stainless steel plate rack of approved pattern and size 0.90 x 0.60m and 1mm thick complete all as specified and directed.

Cleaning of septic tank by removing man hole cover including removing of earth/soil spread over the cover if any, from the frame of a septic tank and receiving chambers, pumping out liquid contents and excavating night soil sediments and waste materials etc., clearing off up to the bottom floor and dispose off the materials to a distance not exceeding 100 mtrs from the septic tank to a pit suitably as directed by Hygienic authorities excavated to contain night soil, place back the man hole cover to its original position and removing all vegetable roots if any and making good surroundings complete all as specified and directed, including the cost of excavating the pit and refilling back. Note:-The measurement shall be inclusive of water content from bottom of tank to the invert level of outlet pipe, complete all as specified and directed.

Opening manholes of septic tanks, removing night soil, other sediments, solid waste and liquid waste in any condition by pumping or any other mechanical means, cleaning internal surfaces of the tank with clean water and refixing the manhole on completion of work complete all as specified and directed. Notes:- (a) The night soil, sediments, solid and liquid waste in any condition removed from septic tank shall be taken away from respective vicinities and premised in closed containers/conveyance and disposed off out of Defence land. (b) Disposal of the same shall be the responsibility of the Contractor. Disposal of waste shall be made in accordance with the regulations of authorities concerned without any extra expenditure to the Government.

Cleaning Man holes of depth not exc 1.5m by removing man hole cover, dewatering and getting out sludge, deposit mud, silt or other foreign materials and vegetation and cleaning the sides and floors of the man hole, removing over flowed silage from surrounding of man holes and removing the same outside the defence land including taking of manholes covers and refixing the same in position and testing of manholes by filling with water complete all as specified and as directed.

Cleaning Man holes of depth exc 1.5m but not exc 3.00m by removing man hole cover, dewatering and getting out sludge, deposit mud, silt or other foreign materials and vegetation and cleaning the sides and floors of the man hole, removing over flowed silage from surrounding of man holes and removing the same outside the defence land including taking of manholes covers and refixing the same in position and testing of manholes by filling with water complete all as specified and as directed.

Cleaning SWG/PVC/CI pipe sewage line manually or mechanically using cleaning rod or compressor and removing foreign material after clearing existing blockage for 75mm dia pipe in vertical walls/floors complete all as specified and directed.

Cleaning SWG/PVC/CI pipe sewage line manually or mechanically using cleaning rod or compressor and removing foreign material after clearing existing blockage for 110mm dia pipe on vertical walls/floors complete all as specified and directed.

Cleaning SWG/PVC/CI pipe sewage line manually or mechanically using cleaning rod or compressor and removing foreign material after clearing existing blockage for 150mm dia pipe complete all as specified and directed.

M&L for surface dressing not exc 15cn deep in soft/loosed soil with grass around the manhole, soak well, drain and septic tank all as specified and directed.

Cleaning of Gully trap/Nahani trap with cleaning tools and getting out sludge, mud, silt or other foreign materials complete all as specified and as directed by Engineer in Charge. Note :- Obtained waste materials shall be disposed to a distance not less than 100 mtrs as directed by Hygienic authorities) complete all as specified and directed.

M&L for making good damaged surfaces of surroundings of nahani trap, Gully trap/floor traps etc. with CM 1:3 or white cement complete all as directed by Engineer in Charge.

Excavation in trenches n.exc 1.5 M wide and n exc 1.5 M depth and getting out in hard/dense soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2, using 40 mm graded aggregate in foundation, mass concrete complete all as specified and directed.

S&F in repairs 150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in walls or floors complete all as specified and directed

M&L for cement concrete bed to drain pipe 150 mm dia in cement concrete 1:3:6 type C2 including packing under the haunching on sides all as directed and specified

S&F in repairs 50mm bore Unplasticized PVC pipes of pressure rating 10 kgf/sqcm in repairs complete all as specified and directed

S&F In repairs PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement and making good the surfaces all as directed and specified

Returning, filling ramming etc. in layers n.exc 25 cum including levelling, watering etc. complete all as directed

Removing excavated materials not exc 50 Mtr and depositing where directed at level n. exc 1.5 Mtr above from the starting point complete all as specified and directed.

PCC 1:3:6 type in foundation type C2 using 40mm graded aggregate in manhole foundation all as specified and directed

M&L for PCC Coping in PCC 1:2:4 type B1 using 20mm graded aggregate including chamfered edges all as specified and directed

M&L of cement concrete type B 1:2:4 20mm graded aggregate as in surface channels, benching inside manholes complete all as specified and directed

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brick work with sub class B bricks straight or curved on plan with old size bricks built in CM 1:6 complete.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement in CM (1:4)

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement in CM (1:6)

Demolition for cement concrete (reinforcement cut as required to facilitate demolition) is reinforced of any description and in any position not otherwise specifically provided for

S&F mild steel TMT bar 6 to 8mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm including clips, complete all as specified and directed.

M&L for precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab set in and pointed in CM 1:6 including necessary formwork complete all as specified and directed.

mahadeva traders cotractor and suppliers

G ANILKUMAR