PROVN OF WATER PROOFING TREATMENT AND TILING OF TOILET OF CERTAIN MD ACCN AT NAA UNDER GE (NORTH) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Taking down cement plaster from brick walls including raking out joints, hacking for key and scrubbing down with water including dado complete all as specified and directed.

M&L for plastering 15 mm thick in CM 1:6 on other than fair faces of brick or concrete surfaces and finishing the surface finished the surface even and smooth (without using extra cement) complete all as specified and directed.

M&L for plastering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) complete all as specified and directed.

M&L for plastering 10 mm thick in CM 1:3 on ceiling surfaces with WPC @ 3% of total weight of cement or as per manufacturers instruction and finishing the surface even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of new undecorated surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for Preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

S&F Anodised aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.)aluminium hinges 75mm long (2 no.) Al handle (1no.) complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete as specified and directed.

Supply only 3mm thick frosted, on one side glass ordinary quality in squares n exc. 0.50 sqm in each pane complete all as specified and directed.

S&F aluminium grill fixed in ventilator with all fittings and fixtures complete as specified and directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15mm screed bed or bedding layer in CM 1:6 for laying of floor finishes complete all as specified and directed.

S&F Non skid coloured Ceramic tiles 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.set and jointed in pointed in white or coloured cement to match complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 in finished rough to receive wall tiles etc complete all as specified and directed.

S&F Glazed ceramic tiles in vertical surface 300x200x 7 mm as in vertical surfaces like dado, skirting,riser to steps, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for 125mm aluminium handles, cast type anodised (ISI marked) complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 200 mm for doors (ISI marked) complete all as specified and directed.

Taking up or down GI pipe including connections of 15 mm dia GI pipe complete all as specified and directed.

Taking up or down GI pipe including connections of 20 mm dia GI pipe complete all as specified and directed.

S&F 15mm dia GI pipe medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.

S&F 20 mm dia GI pipe medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.

S&F in repair 10 Ltrs capacity PVC dual flush cistern, valveless, syphonic action type, low level white with inlet, ball valve, float and handle complete including brackets and connection to pipe complete including dismantling of existing flushing cistern and flush pipe complete all as specified and directed.

Supply only PVC flush pipe 32 mm dia for low level cistern complete all as specified and directed.

S&F in repair 15 mm dia CP bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair of angle stop valve 15 mm dia CP fancy type cast copper alloy with crutch or butterfuly handle and screwed both ends for iron pipe or for unions complete all as specified and directed.

M&L for cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate 75mm thick as in in sunken floor finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick plastering in CM (1:3) with WPC @ 3% of total weight of cement or as per manufacturers instruction at all around and base of sunken floor with proper slope and finished the surface even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for applying one coat of 85/25 grade hot bitumen @ 0.7Kg/Sqm over a coat of bituminous [email protected]/Sqm complete all as specified and directed.

S&F Polythene film,150 micron, natural colour fixed with cold cut back adhessive complete all as specified and directed.

S&F 25mm dia GI pipe (medium grade) with all fitting laid in trenche complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete type E2 1:5:10 ( using 40 mm graded crushed stone aggregate) as in sunken floor complete all as specified and directed.

M&L for Cement concrete 40mm thick type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in floor and finished the cement concrete surface rough to receive floor finishes complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

S&F in repair vitreous china squatting pan of orissa pattern long pan size 580 mm x 440mm white with 'P' or 'S' strap front or back inlet and foot rest any pattern complete all as specified and directed.

Demolition of unserviceable nahani traps of any description and removing material from site complete all as specified and directed.

S&F 75 mm dia PVC nahani trap with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors etc complete all as specified and directed.

S&F PVC (SWR) bends 75 mm bore any radius with access door complete all as specified and directed.

S&F PVC (SWR) branch piece, Tee,75 mm bore, single equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors etc complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore any radius with access door complete all as specified and directed.

S&F PVC (SWR) branch piece 110 mm bore, single (single Y) equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

Shree Krishna Traders