Construction regulator shutter for VCB at Muttiyara Thod, Ramanattukara munciplaity , kozhikode

Amount

Earth work ,Shuttering ,RCC and cement concrete for Pier and retain walland convey the scrap materials to nearest custodian office . Cost includes of labors, hire charge of tools , conveyance, loading and unloading charges etc. complete

od46658/2020_2021/MH : Dismantling of the Canal Shutter ( up to 2 Tonne weight ) /Hoist unit /Embedded parts etc.of the same and stacking at distance of 100m including hire of machinery labour etc. complete as direct by the departmental officer at the site (weight of unserviceable shutters and embedded parts may be calculated as 60% unservicable hoisting unit as 80%)

15.1 : Demolishing lime concrete manually / by mechanical means and disposal of material within 50 metres lead as per direction of Engineer - in- Charges.

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Supply , Fabrication of MS and SS material for Embeded parts , cost includes cost of material

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od46651/2020_2021/MH : Fabrication and erection of Embedded parts for canal shutter (up to 2 tonnes w.t) and accessories as per approved specifications and drawing and directions of departmental officer at site including cost of labour,machinary,all leads and lifts,incidental and handling charges etc complete but excluding cost of material already supplied

od46655/2020_2021/MH : Fabrication supply erection and assembling in correct position and alignment by welding SS embedded parts in 304L Grade like roller track seal track seal seat etc as per approved specification drawing and direction of departmental officer at site including cost of all materials , labour machinery for planning welding shearing grinding etc lead and lift conveyance incidental and handling etc complete

Supply of materials, fabrication,painting and erection of MS shutters

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od46649/2020_2021/MH : Supply of MS Bolts and Nuts

od46653/2020_2021/MH : Fabrication and supply of Structural steel canal shutter(up to 2 tonnes w.t) / Hoist bridge /platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Erection of the shutters safely in the grooves , assembling and aligning

od46646/2020_2021/MH : Erection of the Canal shutter (Up to 2 tonnes weight)/Hoist Bridge / Platform including handrail,ladder etc same including. Alignment correcting and setting complete including cost of all machinery, labour all incidental and conveyance ,lead and lift charges etc complete but excluding cost of material already supplied

Supplying and fixing of flat type rubber seal at the bottom side , angular type at vertical side of of the cross shutter and rubber flap for vertical sides of all other canal shutters

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.117 : Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Supply of materials, fabrication,painting and erection of hoisting bridge and hoist units, screw rod for shutter

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od46649/2020_2021/MH : Supply of MS Bolts and Nuts

od46652/2020_2021/MH : Supply of 32 mm NB GI pipe

od46656/2020_2021/MH : Fabrication and supply of Structural steel canal shutter(up to 2 tonnes w.t) / Hoist bridge /platform and accessories etc. same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.103 : Supply of MS checquered plates including cost of conveyance charges

Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

:Providing worm reducer arrangement for hoisting the shutters, including cost of all materials labour hire charges of machinery, industrial charges etc complete

od46648/2020_2021/MH : Providing of Double worm and pinion having a lift speed of round 5.00cm/min for hand operation/manual operation including cost of all material ,labour,hire charge and conveyance

od46650/2020_2021/MH : Providing connecting shaft ( GI Pipe)to connect two worm reducers (already supplied) of the operating mechanism

od46660/2020_2021/MH : Supplying and fixing cast steel thrust roller assembly having 125mm Dia, 50mm tread width, SS(304) shaft, 50mm dia and 120mm long and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete

Supply of EN -8 shaft and machining from 67mm outer dia to Screw rod to 63 mm dia od for shutters

od46647/2020_2021/MH : Providing EN-8 screw rod 7.5 tonne capacity 4.00M lift screw hoist having one number of EN-8 Screw shaft having a lifting spead of around 5.00 cm/min for 24rpmof hand operation including cost of all material,labour,hire charges and conveyance

Erection of the hoisting bridge and units including Screw rod, base and nut ,Worm and Pinion for Shutters etc

od46645/2020_2021/MH : Erection of the Canal Shutter ( up to 2 Tonne weight )/ hoist bridge/Plat form including hand rails , ladder etc for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Providing Ring bund and Bailing out

60.1.1 : RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height 2.00m including labour dismantling the bund after completion of the work etc. complete.

60.2.2 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

ALI ASHRAF

ASHIFUL HAK.C

P.Damodaran, G.R.Industries

Bidder Name

P.Damodaran, G.R.Industries

ASHIFUL HAK.C

PEETHAMBARAN

ALI ASHRAF