PROVN OF COVERED SHED OF SIZE 22.00M X 7.00M X 4.3M IN PLANT LOCATION NEAR LONG RANGE AREA WITHOUT HARDSTANDING AND OTHER SANCTIONED WORKS AT PALAMPUR MIL STN

Amount

SCHEDULE 'A' PART-I Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. (manual excavation)

M&L hardcore broken stones or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L plain cement concrete type D-2 1:4:8 (40mm graded aggregate crushed stone aggregate), as in foundations, filling, post holes and mass concrete complete all as specified and directed.

M&L brickwork with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete, all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan, to any radius, in half brick thick wall built in cement mortar 1:4, complete, all as specified and directed.

M&L15mm thick plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed .

M&L 5mm thick plater in CM 1:3 on fair faces of brick work or concrete surfaces of ceiling,soffit, etc finished even and smooth without using extra cement, complete complete, all as specified and directed.

M&L forming square grooves in plaster n exc 12mm deep and n exc 15mm on face complete, all as specified and directed.

M&L preparation of newly plasterd surfaces of wall and apply two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and directed.

M&L Peparation of new plastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC content less than 50 gms/litre, and UV resistance as per IS 15489-2004,alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additived @1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90litre/10 sqm on new surface complete all as specified and directed.

M&L preperation of new or previously un-treated surfaces of steel over 10 cm in width or girth,not otherwise described and applying two coats fo synthetic enameld paint over a coat of red oxide primer complete all as specified and directed.

M&L 100mm thick, Plain cement concrete 1:4:8 (Nominal Mix) type D-2 (using 40mm graded crushed stone aggregates), as in sub base of flooring finished even and rough complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1 (20 mm graded crushed stone agg as in floor finished even smooth with out using extra cement, complete all as specified and directed.

M&L75mm thick cement concrete 1:3:6 ( M-10 Nominal mix), type C-2, (using 40mm graded crushed stone aggregate) as in plinth protection finished fair & even without using extra cement including filling of joints with mastic filling (one part of bitumen and 03 parts of sand) complete all as specified and directed.

M&L forming Construction joint 30mm deep x 10mm wide and filled with sealing compound grade 'A' ,complete all as specified and directed.

S&F Pressed steel frames size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made Steel windows side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars dovetailed or welded, complete all as specified and directed.

S&F factory made Steel windows side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars dovetailed or welded, complete all as specified and directed.

S&F mild steel framed work such as grills,gratings,with end of bars sholdered and/ or riveted, or forged into spikes,framed guard bars; barred iron doors; ladders; framed balusters;walk ways;railings; framework of water tanks and similar work confirming to Fe 290 - Gde-E 165 complete all as specified and directed.

S&F 3mm thick sheet glass, figured glaas, pin headed in square n exc 0.5 sqm in each pane, complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F 300mm mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F mild steel butt hinges 100mm long medium weight cold rolled, complete all as specified and directed.

S&F 200mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm size aluminium handles, cast type anodised complete all as specified and directed.

S&F mild Steel TMT Bar 10mm dia and over cut to length bent to shape required including cranking , bending binding spirally for hooping for colomns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

S&F mild steel TMT bar 6mm to 8mm dia and over cut to length, bent to shape required incl cranking bending and binding with and including mild steel wire(annealed) not less then .9mm dia, complete all as specified and as directed.

S&F mild Steel TMT bars 5 mm dia and over upto 10mm dia in stirrups and binders etc including cutting, binding bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L reinforced cement concrete, M-30 (Design Mix), type B-1(using 20mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete etc, complete all as specified and directed .

M&L reinforced cement concrete, M-30 (Design Mix), type B-1(using 20mm graded crushed stone aggregates) as in Columns, pillars, piers, posts and struts etc, complete all as specified and directed.

M&L reinforced cement concrete, M-30 (Design mix), type B-1 using 20mm graded aggregates, as in beams, cantilvers, bressummers, lintels over 1.50 m span, complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical to rough finished concrete, complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed .

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and directed.

Returning, filling in (soil), including spreading, levelling , watering and well ramming in layers n exc 25cm thick, complete all as specified and directed .

Removing excavated soil to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point, complete all as specified and directed .

M&L steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1998 Gd St-240 complete all as specified and directed.

M&L framed brackets of angles or tees with web and franges cut to shape, drilled and countersunk for screw incl bending and welding angles, as necessary gusset plate plates, reviting etc 10 kg each brackets confirming to Fe 290 Gde E-165 complete all as specified and directed.

S&F mild steel screw bolts 5 to 10mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and haxagonal or square exe 15 cm and n exc 22.50 cm long, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof cover / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof cover / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed in CM 1:6, complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts plate type, stove enameled black with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

M&L machine Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and incl 10mm thick backing coat in CM 1:4, complete all as specified and directed.

M&L 60mm thick rubber moulded coloured machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size laid in path, porch, hard standing or flooring etc conforming to IS-15658-2006, M-35 grade over and including 25 mm thick layer of sand cushioning, complete all as specified and directed .

M&L pre-cast cement concrete type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specifed and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in & ramming earth mixed with earth around in layers n. ecx. 25 cm thk. , watering & removing surplus soil to a distance n. exc. 50m & making goodsurface in any type of soil, complete all as specified and directed.

M&L plain cement concrete 1:3:6 (Nominal Mix) type C-2, (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete etc, complete all as specified and directed.

S&F rolled mild steel plates (plain or chequered) channels,square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed.

M&L 100mm thick plain cement concrete, M-15 (Nominal Mix), type B-1 (using 20mm graded crushed stone aggregate) as in floors finished even and smooth without using extra cement complete all as specified and as directed.

Supply only 38mm in width glass dividing strips, 3mm thick, inserted in position, conform to design complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed.

Supply and fixing mild steel hand rails, half round or other stock section and countersunk for balusters, running bars for balusters, nosing to steps including embeding in concrete and screwing etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

M&L PCC, M-15 (Nominal Mix) type B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, , string courses, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

M&L15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed .

SCHEDULE 'A' PART-II M&L point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits), with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including concealed PVC rigid conduit with accessories fixed wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for One light/ fan/ Exhaust fan point controlled by one, one way switch 5/6 Amps complete all as specified and directed.

All as per serial item No 58 here-in-before but for one fan point/Exhaust fan controlled by one, one way switch complete all as specified and directed .

All as per the description of Serial item No 58 above but for 5/6 Amps socket outlet on independent board.

All as per the description of Serial item No 58 above but for 5/6 Amps socket outlet on same board.

S&F switch piano 6 Amp flush type single pole one way with ISI marked,complete all as specified and directed.

S&F socket outlets 2-in-1, 3 pin 6 Amp flush type, complete all as specified and directed.

S&F ceiling rose, 3 phase / PVC / Polycarbonate, isolated body complete all as specified and directed.

S&F 20W tube light fitting (batten and LED tube rod), surface and wall mounted LED batten (overall size (1182x23x37) mm with aluminium housing and integrated electronic driver having THD<20% suitable for 20W LED tube rod 4ft long ultra bright LED polycarbonate tubelight with THD<10% with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders (single side connection) complete all as specified and directed. . Make: Havells Cat Part No. for batten LUMILINEPLUSBS20WLED865SPCSS and Cat Part No. for tube rod PHOTONULTRAE 2.01213T8SSTL20WLED865SPC or equivalent make and Cart Part as approved by GE.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply & fix 10 Watt LED bulb complete all as specified and directed .

Supply and fix distribution board iron clad SPN 4 way DB, double door with IP-43 protection 415 V 3 Phase 50 HZ complete with appropriate size of copper busbar and neutral link complete and incl cutting chasing to wall for fixiing DB and making good the disturbed wall to match with existing surface complete all as specified. Make:- Indo Asian Cat Part No 811840 or equivalent as approved by GE

S&F MCB SPN ‘C’ curve, 10KA, 240V, 40 Amps, in the MCB DB including necessary connection complete all as specified and directed.

S&F MCB SP ‘C’ curve, 10KA, 240V, 6 to 40 amps, in the MCB DB including necessary connection complete all as specified and directed.

M&L earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm thick buried directly under ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level ,connected to galvanised earth lead wire 4.0mm by means of bolts, nuts, check nuts, washer including test point by means of bolts, nuts, check nuts, and washers of galvanized iron and connected to main switch / control board up to 7.5 metre away from earth electrode and including GI pipe light grade 20 mm bore protection pipe & necessary excavation and earth work in any strata, PCC chambers in PCC 1:3:6 type B1, RCC 1:2:4 type B1 cover slab 50mm thick with 8mm dia TMT bars at 140mm C/C both ways, with lifting handle, watering pipe of GI medium grade 20 mm bore, wire mesh, funnel, lugs and charcoal, salt etc all as applicable and as per plate No 3 of SSR Part-I and all as specified.

Supply and fixing of exhaust fan AC single phase 240 V of size 300mm sweep (Metal body) with louvers shutter and making good disturbed complete with connection from ceiling rose to exhaust fan all as specified and directed.

S&F 1200mm sweep ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply & laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep in any type of soil for laying cables, foundation of poles etc and getting out complete all as specified and as directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material to distance not exc 50 Mtr and depositing where directed at alevel not exc 1.5 Mtr above the starting point complete all as specified and as directed.

M&L sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed.

M&L old size brick class B ffor protection of cable laid dry, flat transversally along the length of the cable on sand cushioning width equal to the length of the brick complete all as specified and as directed.

S&F 40 mm bore galvanized iron tubing, light grade including all fitting for cable protection etc laid in floor, trenches or fixed to poles with clamps etc complete all as specified and as directed.

M/S THAKUR ENTERPRISES

M/s ASS Construction Co

BHARDWAJ BUILDERS

MM Constructions