Providing installation testing and commissioning of pumping Machinery with allied electro mechanical works at Dugwell no 3 and Dugwell No 6 of Nowshaera Town

Amount

Providing, of submersible pump set 8000 GPH x 200MH (Head Range +-5%), coupled with suitable motor at Rajal Hanjana. The recommended make of Pump should be Kirloskar/ KSB/ LUBI along with recommended make of motor. The pumping Machinery should confirm relevant ISO with all latest amendments. The equipment shall also be accompanied with test certificates and performance curves.

Labour charges for loading, carriage of 8000GPH X 200MH submersible pump with motor set along with allied equipments shifting the same by means of mechanical transport to unloading site at road side near the pumping station D/Well No 3 and Dugwell No 6 Nowshera Town including labour charges/ crane charges for loading and unloading of pumping machinery. Shifting the same from unloading site to inside the pump room by using skilled labour, wooden / Bamboo bars, manila rope and hire charges of tools and tackles required at site. Installation, testing and commissioning of SPS 8000 GPH X 200 MH along with allied electromechanical works by way of fabrication & fitting of GI pipe nipples welded with MS flanges-4 inches dia for making delivery of the pump-03Nos. Fab / fitting of GI pipe nipple with threads at one end & MS flange at other end & fastening of nipple with the delivery of pump. P/F of MS bends 4 inches dia. with MS flanges. P/F of MS clamps 4 inches dia. - 02 No. for holding submersible pump & nipples. Fab/ fitting of bed plate for resting of clamps holding submersible pump & nipples.. Lowering of pump/motor along with GI pipe nipples into the dug well with the help of chain pulley block , ropes & skilled/unskilled labours .P/F of one no 4 inches dia sluice valve & one no check valve 4inches dia with MS flanges , nut/bolts & washers. P/F of nut/bolts, washers, tapes & sundry items .Complete job includes cost of material, labour charges, carriage charges & complete welding work at site.

Fabrication and fitting /grouting of angle iron panel board fitted with 12mm thick water proof ply with good quality mica. Providing/fitting of 200 Amp 415V HRC type main switch (H/DUTY) -01 no, Providing/fitting of 185mm square aluminium cable -25 mtr-3.5 core for making of connection from busbar fuse system to main switch with proper thimbling and insulation. Design fabrication installation testing and commissioning of automatic submersible control panel suitable for operation of 50HP submersible motor with all safety devices. Providing /fitting of 200amp busbar on the panel board. Providing/fitting of copper cable for making of electrical connections from 200Amp main switch to 100 KVA voltage stabilizer and then to 200amp busbar then starters with proper thimbling and insulation. Providing /fitting of 16mm sq copper cable for making connection from automatic control panel to motors. Checking continuity of whole electric circuit. Testing and commissioning of electro mechanical works by checking of all electrical connections, tapping and tightening all other connections. Testing the machinery on full load. Complete job

Testing and commissioning of HC pump motor set with stand by and all other allied electro mechanical works. Checking of all electrical connections, tapping and tightening all other connections. Plugging of leaking joints if any by way of welding, replacement of gaskets and tightening of nuts and bolts. Checking the alignment of pump and motor sets and testing the machinery on full load. Complete job.

BEE AAR ENTERPRISES

M/s RK Elect. Mech. Engg and fabrication works