Loading…
Loading…
Tender Value
₹55.6 L
EMD Value
₹1.1 L
Closing Date
27 Aug 2026, 11:00 am3d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
ELECT G
15 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- (i) Repair or maintenance of HS & VS motors.(ii)AMC of repair of HS & VS motors(iii)Rewinding of Motors of 25 HP and above
5 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are requested to go through the following documents which are available in upload/View Documents in Home Page of IREPS portal for works tenders before submitting the e-tender. 1. General Instruction for E-Tenders on works contract--Chapter-I 2. Special Condition-General-Chapter-II
1. I/We have visited the works site and I/We am/are aware of the site conditions. 2. We have read the tender Notice[NIT] details, Tender document along with all the conditions attached/referred to, in this tender document, and agree to abide by the said conditions. 3. We are aware of the fact that the railway reserves the right to amend the scope and value of the contract and to reject[or accept] this offer without assigning any financial liability.
The Tender document uploaded as "Tender Document.pdf" should be read in conjunction with the terms and conditions and should read and followed before quoting the tender.
DHN DIVN: Maintenance Contract for repair of different type & capacity of HS & VS Motors over Dhanbad Division ( For three years)
EL-09-OPEN-2026-27~ECR
EL-09-OPEN-2026-27
Open
Works - General
36 Months
Dhanbad, Jharkhand
₹0
₹1.1 L
4 Aug 2026
4 Aug 2026
13 Aug 2026
71 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 55,55,831 | ||
| — | 6.00 | — | — | ||
| Dismantling and re-assembling after repair (Up to 20HP) | — | — | — | 2,472 | |
| — | 42.00 | — | — | ||
| Dismantling and re-assembling after repair. (21 to 40HP) | — | — | — | 35,280 | |
| — | 21.00 | — | — | ||
| Dismantling and re-assembling after repair. (41 to 60HP) | — | — | — | 21,000 | |
| — | 9.00 | — | — | ||
| Dismantling and re-assembling after repair. (61 to 90HP) | — | — | — | 10,368 | |
| — | 9.00 | — | — | ||
| Dismantling and re-assembling after repair. (91 to 200 HP) | — | — | — | 17,388 | |
| — | 6.00 | — | — | ||
| Repair of bearing housing.(Up to 20HP) | — | — | — | 3,870 | |
| — | 42.00 | — | — | ||
| Repair of bearing housing.(21 to 40HP) | — | — | — | 42,000 | |
| — | 21.00 | — | — | ||
| Repair of bearing housing.( 41 to 60HP) | — | — | — | 23,520 | |
| — | 9.00 | — | — | ||
| Repair of bearing housing. ( 61 to 90HP) | — | — | — | 13,500 | |
| — | 9.00 | — | — | ||
| Repair of bearing housing.( 91 to 200HP) | — | — | — | 15,084 | |
| — | 2000.00 | — | — | ||
| Supply of super enameled copper wire for rewinding of stator | — | — | — | 34,46,000 | |
| — | 6.00 | — | — | ||
| Rewinding of stator/rotor with the wire supplied against the item no "3" above including supply & fixing of insulating materials. (Up to 20HP) | — | — | — | 6,156 | |
| — | 42.00 | — | — | ||
| Rewinding of stator/rotor with the wire supplied against the item no "3" above including supply & fixing of insulating materials. (21 to 40HP) | — | — | — | 66,150 | |
| — | 21.00 | — | — | ||
| Rewinding of stator/rotor with the wire supplied against the item no "3" above including supply & fixing of insulating materials. (41 to 60HP) | — | — | — | 52,815 | |
| — | 9.00 | — | — | ||
| Rewinding of stator/rotor with the wire supplied against the item no "3" above including supply & fixing of insulating materials. (61 to 90HP) | — | — | — | 31,005 | |
| — | 9.00 | — | — | ||
| Rewinding of stator/rotor with the wire supplied against the item no "3" above including supply & fixing of insulating materials. (91 to 200HP) | — | — | — | 47,115 | |
| — | 6.00 | — | — | ||
| Vaccum impregnation ,drying and heating of the stator/rotor. (Up to 20HP) | — | — | — | 2,838 | |
| — | 42.00 | — | — | ||
| Vaccum impregnation ,drying and heating of the stator/rotor. (21 to 40HP) | — | — | — | 21,798 | |
| — | 21.00 | — | — | ||
| Vaccum impregnation ,drying and heating of the stator/rotor. (41 to 60HP) | — | — | — | 16,044 | |
| — | 9.00 | — | — | ||
| Vaccum impregnation ,drying and heating of the stator/rotor. (61 to 90HP) | — | — | — | 9,621 | |
| — | 9.00 | — | — | ||
| Vaccum impregnation ,drying and heating of the stator/rotor. (91 to 200 HP) | — | — | — | 16,362 | |
| — | 6.00 | — | — | ||
| Repair of terminal board, including supply of necessary materials. (Up to 20HP) | — | — | — | 2,538 | |
| — | 42.00 | — | — | ||
| Repair of terminal board, including supply of necessary materials. (21 to 40HP) | — | — | — | 18,774 | |
| — | 21.00 | — | — | ||
| Repair of terminal board, including supply of necessary materials. (41 to 60HP) | — | — | — | 17,094 | |
| — | 9.00 | — | — | ||
| Repair of terminal board, including supply of necessary materials. (61 to 90HP) | — | — | — | 8,082 | |
| — | 9.00 | — | — | ||
| Repair of terminal board, including supply of necessary materials. (91 to 200HP) | — | — | — | 4,392 | |
| — | 40.00 | — | — | ||
| Supply & fixing of new bearing and associated accessories if any. (SKF FAG, NBC).6314 | — | — | — | 1,33,800 | |
| — | 30.00 | — | — | ||
| Supply & fixing of new bearing and associated accessories if any. (SKF FAG, NBC).6315 | — | — | — | 1,29,600 | |
| — | 6.00 | — | — | ||
| Supply & fixing of new bearing and associated accessories if any. (SKF FAG, NBC).7312 | — | — | — | 25,752 | |
| — | 25.00 | — | — | ||
| Supply & fixing of new bearing and associated accessories if any. (SKF FAG, NBC).7319 | — | — | — | 5,14,025 | |
| — | 10.00 | — | — | ||
| Supply & fixing of new bearing and associated accessories if any. (SKF FAG, NBC).7220-B | — | — | — | 2,64,770 | |
| — | 10.00 | — | — | ||
| Supply & fixing of new bearing and associated accessories if any. (SKF FAG, NBC).7211-B | — | — | — | 24,360 | |
| — | 25.00 | — | — | ||
| Supply & fixing of new bearing and associated accessories if any. (SKF FAG, NBC).7318 | — | — | — | 3,48,800 | |
| — | 7.00 | — | — | ||
| Supply & fixing of new bearing and associated accessories if any. (SKF FAG, NBC).NU- 318 | — | — | — | 1,02,123 | |
| — | 87.00 | — | — | ||
| Testing and commissioning at site. | — | — | — | 61,335 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocument.pdf
ATTACHMENT
GCCApril-2022.pdf
ATTACHMENT
GCCCorrectionslip1to11_compressed.pdf GCC Correction slip
ATTACHMENT
GCCCorrectionslip1to11_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].