Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹16.4 CrAdmitted-Finance | -9.11% | ₹16.4 Cr | L1 | Admitted-Finance |
| 2 | L2₹18.7 CrAdmitted-Finance | +3.92% | ₹18.7 Cr | L2 | Admitted-Finance |
| 3 | L3₹19.0 CrAdmitted-Finance | +6.51% | ₹19.0 Cr | L3 | Admitted-Finance |
| 4 | L4₹19.2 CrAdmitted-Finance | +6.89% | ₹19.2 Cr | L4 | Admitted-Finance |
| 5 | L5₹19.6 CrAdmitted-Finance | +9.77% | ₹19.6 Cr | L5 | Admitted-Finance |
Tender Value
₹18.0 Cr
Closing Date
27 Sept 2021, 6:00 pmClosed
EE, RSAMB, Jodhpur-II
EE, RSAMB, Mandore mandi Jodhpur-II
Construction of Residential School Bhaniyana Block Sankara Distt. Jaisalmer, for Minority Department
2021_RSAMB_241122_1
NIT-05/2021-22
Open Tender
Civil Works - Buildings
540 days
Bhaniyana
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
ICICI Bank A/C No 683401030353 IFSC ICIC0006834
Exempted
4 Oct 2021
18 Sept 2021
28 Sept 2021
18 Sept 2021
27 Sept 2021
18 Sept 2021
eProcurement System Government of Rajasthan Created By: MAHENDRA KUMAR BORAWAR Created Date/Time: 04-Oct-2021 01:13 PM Tender Title: Construction of Residential School Bhaniyana Block Sankara Distt. Jaisalmer, for Minority Department Tender ID: 2021_RSAMB_241122_1
Tender Inviting Authority: Executive Engineer, R.S.A.M.B. Jodhpur-II
Name of Work: Construction of Residential School Bhaniyana Block Sankara Distt. Jaisalmer, for Minority Department
Contract No: NIT-05/2021-22 [Rates are based on Building Works PWD BSR w.e.f. 22 April, 2019 , Road PWD BSR w.e.f. 4 June , 2019 Jaisalmer District & Electrical PWD BSR w.e.f. 01 April, 2021 Jaipu]
SCHEDULE OF WORK / ITEM(S)
Sl.No Bidder Name Estimated Rate Quoted Percentage Quoted Rate in Figures and Words
1.00 JAI BABA CONSTRUCTION COMPANY(GSTN-08AABFJ2456N1Z3) 172048942.00 19.80 206114632.52 Twenty Crore Sixty One Lakh Fourteen Thousand Six Hundred Thirty Two
2.00 RAMESH ENGINEERING WORKS(GSTN-08AHCPK0072DIZV) 172048942.00 -9.11 156375283.38 Fifteen Crore Sixty Three Lakh Seventy Five Thousand Two Hundred and Eighty Three
3.00 Kishori Construction Co.(GSTN-08AOVPS1010D1Z1) 172048942.00 18.23 203413464.13 Twenty Crore Thirty Four Lakh Thirteen Thousand Four Hundred Sixty Four
4.00 DHARIWAL TRADERS PRIVATE LIMITED(GSTN-08AAGCD7338F1ZK) 172048942.00 6.51 183249328.12 Eighteen Crore Thirty Two Lakh Fourty Nine Thousand Three Hundred and Twenty Eight
5.00 Ali mohd abdul mazid(GSTN-08AACFA3377J1ZD) 172048942.00 3.92 178793260.53 Seventeen Crore Eighty Seven Lakh Ninty Three Thousand Two Hundred and Sixty
6.00 M/s Satish Kumar And Company(GSTN-08AAEFS5582M1ZK) 172048942.00 6.89 183903114.10 Eighteen Crore Thirty Nine Lakh Three Thousand One Hundred and Fourteen
7.00 FAZLUR-REHMAN AND SONS(GSTN-08AAAFF7644P1ZW) 172048942.00 12.71 193916362.53 Ninteen Crore Thirty Nine Lakh Sixteen Thousand Three Hundred and Sixty Two
8.00 M/s Sunar Contractor(GSTN-08AQGPD1943F1Z5) 172048942.00 11.73 192230282.90 Ninteen Crore Twenty Two Lakh Thirty Thousand Two Hundred and Eighty Two
9.00 M/S Naresh Kumar Goyal(GSTN-08AEJPG4268H1ZC) 172048942.00 9.77 188858123.63 Eighteen Crore Eighty Eight Lakh Fifty Eight Thousand One Hundred and Twenty Three
10.00 M/S AAKAR CONSTRUCTIONS(GSTN-NA) 172048942.00 9.67 188686074.69 Eighteen Crore Eighty Six Lakh Eighty Six Thousand Seventy Four
Lowest Amount Quoted BY: RAMESH ENGINEERING WORKS(156375283.38)
eProcurement System Government of Rajasthan Created By: MAHENDRA KUMAR BORAWAR Created Date/Time: 04-Oct-2021 01:13 PM Tender Title: Construction of Residential School Bhaniyana Block Sankara Distt. Jaisalmer, for Minority Department Tender ID: 2021_RSAMB_241122_1
Tender Inviting Authority: Executive Engineer, R.S.A.M.B. Jodhpur-II.
Name of Work: Construction of Residential School Bhaniyana Block Sankara Distt. Jaisalmer, for Minority Department
Contract No: NIT 05/2021-22
SCHEDULE OF WORK / ITEM(S)
Sl.No Description of Work / Item(s) No.of Qty Units Estimated Rate JAI BABA CONSTRUCTION COMPANY(GSTN-08AABFJ2456N1Z3) RAMESH ENGINEERING WORKS(GSTN-08AHCPK0072DIZV) Kishori Construction Co.(GSTN-08AOVPS1010D1Z1) DHARIWAL TRADERS PRIVATE LIMITED(GSTN-08AAGCD7338F1ZK) Ali mohd abdul mazid(GSTN-08AACFA3377J1ZD) M/s Satish Kumar And Company(GSTN-08AAEFS5582M1ZK) FAZLUR-REHMAN AND SONS(GSTN-08AAAFF7644P1ZW) M/s Sunar Contractor(GSTN-08AQGPD1943F1Z5) M/S Naresh Kumar Goyal(GSTN-08AEJPG4268H1ZC) M/S AAKAR CONSTRUCTIONS(GSTN-NA)
Rate Amount Rate Amount Rate Amount Rate Amount Rate Amount Rate Amount Rate Amount Rate Amount Rate Amount Rate Amount L1 Amount L1 Vendor
1.00 Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of 0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvaiumeseel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm shets be casted with regular modified plyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate at made at to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and foe a minimum up to 12mts with all scaffolding.0.50 mm thick. 427.92 Sqm 633.00 633.00 270873.36 630.00 269589.60 757.00 323935.44 750.00 320940.00 750.00 320940.00 600.00 256752.00 510.00 218239.20 633.00 270873.36 633.00 270873.36 700.00 299544.00 218239.20 FAZLUR-REHMAN AND SONS
2.00 PIC of incerator (Sanitary Napkin Destroyer) automated electric operated loading capacity 5 in one go to 100 in 8 hrs wall mounted ecofriendly Wt 30-40 kg with warrenty 2 years in MS cabin with epoxy anti jstic paint paint automated and operated electrically to burn completely the used Sanitary Napkins and create an Environmental friendly atmosphere as approved by Engineer-in-charge. 18.00 Cum 18000.00 18000.00 324000.00 17500.00 315000.00 18000.00 324000.00 15000.00 270000.00 18000.00 324000.00 17500.00 315000.00 13000.00 234000.00 18000.00 324000.00 18000.00 324000.00 18500.00 333000.00 234000.00 FAZLUR-REHMAN AND SONS
3.00 Filling the gap upto 5 mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. (Jaipur BSR 2019 item no 16.7) 216.16 Rmt 71.00 71.00 15347.36 70.00 15131.20 71.00 15347.36 71.00 15347.36 50.00 10808.00 70.00 15131.20 50.00 10808.00 71.00 15347.36 71.00 15347.36 80.00 17292.80 10808.00 Ali mohd abdul mazid, FAZLUR-REHMAN AND SONS
4.00 Add Extra for using M.S.clips of special design for spacing from mounted wall for holding 110mm dia. Pipe with all required Z Channel, nuts and fastner, including the painting of clips with redoxide and emulsion paint as per direction of engineer-in-charge. Calculation as Per Holding Each 4 Mtr. Pipe 700.00 Nos 47.00 47.00 32900.00 45.00 31500.00 47.00 32900.00 100.00 70000.00 50.00 35000.00 47.00 32900.00 35.00 24500.00 47.00 32900.00 47.00 32900.00 55.00 38500.00 24500.00 FAZLUR-REHMAN AND SONS
5.00 Add Extra for using M.S.clips of special design for spacing from mounted wall for holding 160mm dia. Pipe with all required Z Channel, nuts and fastner, including the painting of clips with redoxide and emulsion paint as per direction of engineer-in-charge. Calculation as Per Holding Each 4 Mtr. Pipe 548.00 Nos 60.00 60.00 32880.00 58.00 31784.00 60.00 32880.00 100.00 54800.00 60.00 32880.00 60.00 32880.00 50.00 27400.00 60.00 32880.00 60.00 32880.00 70.00 38360.00 27400.00 FAZLUR-REHMAN AND SONS
6.00 Add extra for Providing and Fixing Fiber Glass mesh 80 GSM, 2M x 300M on outer AAC Block walls including the cost of fixing with nails. Complete in all respect as per directions of engineer in charge. 3101.36 Sqm 26.00 26.00 80635.36 25.00 77534.00 26.00 80635.36 35.00 108547.60 25.00 77534.00 25.00 77534.00 20.00 62027.20 26.00 80635.36 26.00 80635.36 35.00 108547.60 62027.20 FAZLUR-REHMAN AND SONS
7.00 Add extra for Providing and Fixing Thermocol sheet as spacer in boundary wall or insulation of PVC storage tank, keeping in position by nail or binding wire sanwiched between masonary. Including the cost of fixing with nails or binding wire etc Complete in all respect as per directions of engineer in charge. 576.78 Sqm 59.00 59.00 34030.02 55.00 31722.90 59.00 34030.02 60.00 34606.80 60.00 34606.80 59.00 34030.02 50.00 28839.00 59.00 34030.02 59.00 34030.02 70.00 40374.60 28839.00 FAZLUR-REHMAN AND SONS
8.00 Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and joint/Spacer 25 mm wide 9 mm deep marble chip mix with marble chips of approved color & 4 mm to 7 mm nominal size laid in White cement, marble chips 2:3 (2-Cement:3-marble chips) by volume. including cost of all material labour ,hire charges and power required.Each slab surrounded by 25 mm terazzo (Marble Chips + white cement mix) spacer in situ all around slab. including rubbing and polishing complete. Area of each slab up to 2001 to 5000 Sq. Cm. Light Shade Pigment With White Cement. (Area of total floor to be measured) up to floor 3 levels 4672.23 Sqm 725.00 725.00 3387366.75 700.00 3270561.00 1000.00 4672230.00 725.00 3387366.75 750.00 3504172.50 900.00 4205007.00 650.00 3036949.50 725.00 3387366.75 725.00 3387366.75 800.00 3737784.00 3036949.50 FAZLUR-REHMAN AND SONS
9.00 Providing and Fixing Backstop unit (Basketball poles). There shall be two (2) backstop units, and each consisting of the following parts: • One (1) backboard. • One (1) basket ring with a ring mounting plate. • One (1) basket net. • One (1) basket support structure. • Padding etc. with following specifications The backboards shall be made of a suitable transparent material (of a tempered safety glass), made in one (1) piece, non reflective, with a flat front surface and shall: • Have a protective framework of the backboard support structure around the outer edge. • Be manufactured such that, if broken, the pieces of glass do not split off. The backboards shall measure 1,800 mm (+ a maximum of 30 mm) horizontally and 1,050 mm (+ a maximum of 20 mm) vertically. All lines on the backboards shall be: • In white, 50 mm in width. The borders of the backboards shall be marked with a boundary line and an additional rectangle behind the ring as follows: • Outside dimensions: 590 mm (+ a maximum of 20 mm) horizontally and 450 mm (+ a maximum of 8 mm) vertically. • The top edge of the base of the rectangle shall be level with the top of the ring and 150 mm (- 2 mm) above the bottom edge of the backboard. Basket ring: The rings shall be made of solid steel and shall: • Have an inside diameter of a minimum of 450 mm and a maximum of 459 mm. • Be painted orange within the following Natural Colour System (NCS) FIBA approved spectrum : 0080-Y70R 0090-Y70R 1080-Y70R • Have its metal a minimum of 16 mm and a maximum of 20 mm in diameter. The net shall be attached to each ring in 12 places. The fittings for the attachment shall: • Not have any sharp edges or gaps, • Have gaps smaller than 8 mm, to prevent fingers from entering, • Basket net. The nets shall be made of white cord and shall be: • Suspended from the rings. • Manufactured so that they check the ball momentarily as it passes through the basket. • No less than 400 mm and no more than 450 mm in length. • Manufactured with12 loops to attach it to the ring. The upper section of the net shall be semi-rigid to prevent: • The net from rebounding up through or over the ring, creating possible entanglement. The ball from becoming trapped in the net or rebounding back out of the net.
9.10 Backboard support structure: The rigidity of the backboard support structure with ring shall fulfil the requirements of the EN 1270 norms.The visible vibration of the backboard support unit shall end a maximum of four (4) seconds after a dunk shot.
9.20 Padding: The backboard and backboard support structure must be padded. The padding shall be of a single solid colour and shall be the same colour on both backboards and support structures. The padding shall be 20 to 27 mm thick from the front, back and side surface of the backboards. The padding shall be 48 to 55 mm thick from the bottom edge of the backboards.The padding shall cover the bottom surface of each backboard and the side surface to a distance of 350 to 450 mm from the bottom. The front and back surface must be covered to a minimum distance of 20 to 25 mm from the bottom of each backboard. All padding shall: • Be constructed so as to prevent limbs from being trapped. • Have a maximum indentation factor of 50%. This means that when a force is applied suddenly to the padding, the indentation in the padding does not exceed 50% of its original thickness. 1.00 Set 95755.00 95755.00 95755.00 90000.00 90000.00 95755.00 95755.00 150000.00 150000.00 125000.00 125000.00 95900.00 95900.00 80000.00 80000.00 95755.00 95755.00 95755.00 95755.00 96000.00 96000.00 80000.00 FAZLUR-REHMAN AND SONS
10.00 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length,with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I. staples and G.I. clips to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) The length of fencing shall be masured correct to a cm. for finished work.Complete as per the direction of Engineer-in-charge. 650.00 Rmt 153.00 153.00 99450.00 150.00 97500.00 153.00 99450.00 153.00 99450.00 250.00 162500.00 150.00 97500.00 135.00 87750.00 153.00 99450.00 153.00 99450.00 160.00 104000.00 87750.00 FAZLUR-REHMAN AND SONS
11.00 PART "B" ELECTRIC WORK NON BSR ITEM Supplying, installation, Testing and commissioning of the passenger/goods/Stretcher or Bed elevator having following main features:
11.01 (a) MOTOR : Gearless lift drive comorising of high starting torque lift duty, 3 phase 440 Volts A.C. permanent magnetic synchronous motor of proper rating with high efficiency shell be used.
11.02 (b) Operation/Drive : Microcessor based/PLC,AC Variable Voltage variable frequency variable speed (V3F) vector control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full colllective selective operation hall call demand response, UP/Down hall stops, main, UP/Down contactor with overload and phase reversal relay and safety controls.
11.03 ( c ) Traction Media : Main hoist flat coated steel belt / rope. Thimbles of spring permit adjustment of uniform tension for smooth operation of the elevator Pulse belt monitoring system to avoid the cut in the belt.
11.04 (d) Car : Car should be with M S platform with bracing of adquate size and to sustain the impact load cabin plus passengers with safety factor of fire for steel with Anti skid PVC flooring and side panels should be of Stainless steel with hair line finish of sheet of grade 304 duty with S.S. handralis. Car ceiling shall be steel finish with aesthetic appearances with LED ceiling lights. The size of the car shall be taken as per available lift well size and relevant BIS code of lifts. Car panel will also be of S.S. 304 grade finished with emergency stop device, emergency alarm, mechanical door safety device, full lenght infra-red curtain in car door, facility of auto/attended mode. All car panel buttons and all floor switches must be with brail language as per lift act. Agency shall also provide & instell one No. 2 MP, IR, IP based ceiling mounted Dome Camerain the car complete with connecting cables & accessories (To be connected with existing CCTV system in the Building). The insoection unit shall be provided at the top of the car.
11.05 (e) Landing Doors : All landing door shall be fully automatic centre opening / telescopic made of hair line finish stainless steel grade 304 with key holes and infrared curtains with unlocking facility from outside.
11.06 (f) Emergency light : Appropriate rechargeable battery operated LED emergency light in the car and along with alarm switch shall be provided.
11.07 (g) ARD : Automatic rescue Device (ARD) shall be provided according to passenger capacity with SMF batteries af approved brands as per BSR.
11.08 (h) Audio - visual Indication : Audio visual indication in the lift car, showing over loading such that doors kept open till excess load is removed.
11.09 (i) Scrolling Indicators : Digital scrolling indicator system for up-down arrow with floor position indicator shall be provided inside the car and at all stops/floors.
11.10 (j) Buffers : Spring buffers/PU Buffers shall be provided.
11.11 (k) Car Fan : ENERGY EFFICIENT Car fan/blower with automatic sleep timer shall be provided.
11.12 (l) Voice Annunciator : Voice annunciator with suitable music timer shall be provided in lift car.
11.13 (m) Self diagnostics system for operational and safty paramenters shall be provided in control panel.
11.14 (n) Mechanical/Electronic over speed governor, door key holes in the floor doors, fireman switch shall be provided.
11.15 (o) lift machine hoisting arrangement in the lift machine room, counter balcnce to promote smoth and economic operation complete with steel guide rails for the car & counter weight, Trap Door, Lifting hooks as required and monkey ladders for lift pit should be provided by the agency along with all other steel structure works, foundations for the machine etc as required.
11.16 (p) Permanent wiring in lift machine room and in lift well with providing and fixing of electrical distiribution board complete with SP & TP MCB'S proper numbers of light points, with LED fixtures, exhaust fan, 2 nis copper plate/ chemical earthing with 8 SWG copper earth wire and plug points shall be provided by the agency. (Power supply of 3 phase 440 V shall be made available by department in lift machine room).
11.17 (q) All civil work related to installation of lift like finishing, cleaning and levelling of lift pit, white wash of lift well and in machine room shall be done by the lift erecting agency without any extra cost.
11.18 ( r) Granite or marble cladding around all landing door openings shall be in the scope of lift installation agency and additional payment shall be made according to the actual measurement/ schedule by the department to the lift agency.
11.19 (s) Agency has to provide all working drawing and documents to comply latest BIS specification and make proper liasion services for obtaining all necessary permissions.
11.20 13 Passengers/884 kg, 3 stops, rated speed adjustable up to 1.0 mtr/sec with 2 years comprehensive maintenance/ DLP. (Note Base Rs. 65000/- only 2 Stop) 2.00 Nos. 1604639.00 1604639.00 3209278.00 1551000.00 3102000.00 1605005.00 3210010.00 1150000.00 2300000.00 1800000.00 3600000.00 1500000.00 3000000.00 1475000.00 2950000.00 1604639.00 3209278.00 1604639.00 3209278.00 1610000.00 3220000.00 2300000.00 DHARIWAL TRADERS PRIVATE LIMITED
Lowest Amount Quoted BY: FAZLUR-REHMAN AND SONS(6760512.90)
BOQ Summary Details Tender Title: Construction of Residential School Bhaniyana Block Sankara Distt. Jaisalmer, for Minority Department Tender ID: 2021_RSAMB_241122_1
Sheet Name Sl.No Bidder Name Amount Bid Rank
BoQ1 1 RAMESH ENGINEERING WORKS 156375283.38 L1
2 Ali mohd abdul mazid 178793260.53 L2
3 DHARIWAL TRADERS PRIVATE LIMITED 183249328.12 L3
4 M/s Satish Kumar And Company 183903114.10 L4
5 M/S AAKAR CONSTRUCTIONS 188686074.69 L5
6 M/S Naresh Kumar Goyal 188858123.63 L6
7 M/s Sunar Contractor 192230282.90 L7
8 FAZLUR-REHMAN AND SONS 193916362.53 L8
9 Kishori Construction Co. 203413464.13 L9
10 JAI BABA CONSTRUCTION COMPANY 206114632.52 L10
BoQ2 1 FAZLUR-REHMAN AND SONS 6760512.90 L1
2 DHARIWAL TRADERS PRIVATE LIMITED 6811058.51 L2
3 RAMESH ENGINEERING WORKS 7332322.70 L3
4 M/s Sunar Contractor 7582515.85 L4
5 JAI BABA CONSTRUCTION COMPANY 7582515.85 L4
6 M/S Naresh Kumar Goyal 7582515.85 L4
7 M/S AAKAR CONSTRUCTIONS 8033403.00 L5
8 M/s Satish Kumar And Company 8162634.22 L6
9 Ali mohd abdul mazid 8227441.30 L7
10 Kishori Construction Co. 8921173.18 L8
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
BOQ_430530.xls
BOQ • 0.96 MB
BID_DOCUMENT.pdf
Tender Documents • 5.12 MB
Technical_Bid.pdf
Additional Documents • 0.22 MB
Other_Document.pdf
Other Document • 2.88 MB
Download all tender documents and submit your bid