8751 PROVN OF PICKETING BLOCKS IN UB AREA, ADDN, ALTN TO GLASS OF FC GALLERY AT 259 SU, PROVN OF RAIN PROTECTION SHED AT ALFA SQN, RENOVATION OF BATHROOM IN TECH AREA AT AF STATION, BAREILLY

Amount

M&L for Reinforced cement concrete (design mix) M-25 grade using 20mm graded stone aggregate in Columns, pillars, piers, posts, struts and similar articles with plain faces complete all as specified.

S&F high strength deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

S&F high strength deformed TMT steel bars 5mm to 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

S&F high strength deformed TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

Use and removal of steel formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for fair finished surface of concrete all as specified

Taking down chowkats or frames with shutters (with out taking off shutters from frames) n. exc. 1.5sq.m. each all as specified.

Taking down chowkats or frames with shutters (with out taking off shutters from frames) exc. 1.5sq.m. but n. exc. 4sq.m. each all as specified.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&F 12mm thick toughened glass doors fixed to existing opening with all necessary fittings like stainless steel pivot hinges, floor door springs, stainless steel handles 25mm dia, 300mm long on both sides; door stoppers, stainless steel locking arrangement at cill level etc. complete including grinding the edges all as specified and as directed. [Make of stainless steel hardware: Dorma/ Hardwyn/ Hettich, Make of glass: Modiguard/ Saint Gobain/ Asahi]

M&L for providing cement concrete type B1, 1:2:4 using 20mm graded aggregate as in lintels up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates etc complete including necessary formwork all as specified.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc. 6m mean radius using old size bricks built in cement mortar (1:6) all as specified.

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc. to receive plaster

M&L for rendering 15mm thick in CM (1:6) on brick or concrete surfaces, finishing even and smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surfaces of walls and applying white cement based putty for 1.5 to 2mm thick, sand papering to obtain smooth and even finish and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 microns) frames for doors, windows, ventilators and partitions (fixed portion) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. complete all as specified and as directed. [Note: Weight of builders hardware & rubber beading shall not be considered for payment, however rate quoted shall be deemed to be included for the same]

S&F powder coated aluminium (minimum thickness of powder coating 50 microns) door shutters, aluminium section weighing not less than 1.00 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified and as directed. [Note: Panel inserts like glass, prelaminated particle board & gauge shall be measured & paid separately]

S&F 5.50 mm thick sheet glass (tinted/ reflective type) of any size complete fixed to aluminium frames

S&F 12mm thick prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination, fixed with screws to timber frame work all as specified.

S&F standard size EPDM rubber beading for fixing glass in to aluminium frames all as directed.

S&F rollers suitable for aluminium sliding doors all as directed.

S&F Veneered particle boards interior grade 18/19mm thick, solid core, faced with decorative veneer on both faces general purpose type, with face veneers of type 'BB', fixed with screws to timber frame work

M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, cross sectional area exc. 13sq.cm but n.exc. 25sq.cm, clean sawn, secured with nails or brads to timber frame all as specified.

S&F Teak wood beading 18/19mm X 4mm fixed with headless nails complete all as specified and as directed

S&F 75mm Extruded brass handles, fabricated type polished

S&F Full extension drawer slider 450mm with plastic rollers, width 12.5mm complete all as specified and directed.

S&F 300mm long Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F 450mm long stainless steel handles suitable for fixing to glass door as approved and as directed.

M&L 140mm length of Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for double charged, vitrified tiles, coloured, first quality of size 600x600mm, 9 to 10mm thick as in Floors/ skirting, set and jointed in cement slurry, finished with flush pointing in coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed. [Note: The colour / shade / design of tiles shall be as approved by GE.]

M&L for glazed digitally printed ceramic tiles of size 600x300mm, 6 to 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:4 complete all as specified.

Excavating in post holes (or similar holes) each n.exc. 0.5cu.m., getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering, and removing surplus soil to a distance n.exc. 50m and making good surface in in any type of soil all as specified.

M&L for plain cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, sub base for flooring etc. all as specified and as directed.

M&L for structural steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe.410-W. (Gde-E-250, Quality-A) complete all as specified.

M&L for steel work in tubular trusses, posts etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS. 1161-1979 grade St-240 all as specified and as directed.

M&L for mild steel Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections conforming to Fe.410-W. (Gde-E-250, Quality-A) complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

All as per Item No. 39 herein before but plain sheet as in eves trim, rake trim and closure trim, valley rain water gutter, down spouts and top rafters etc.

M&L for preparation of new or previously untreated steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for Cutting chases in brick/ concrete walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and as directed

Taking up or down galvanized steel tubing 15mm bore with fittings.

Taking up or down galvanized steel tubing 20mm bore with fittings.

S&F rotational moulded polyethylene water storage tanks, double layered of capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples, taking down existing unserviceable tank all as specified and as directed by Engineer-in-charge.

S&F in repairs Ball valves 20mm bore dia, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed [Minimum weight: 210gms] all as specified including taking down existing unserviceable valve.

Supplying and laying of CPVC pipes 15mm bore dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Supplying and laying of CPVC pipes 20mm bore dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

S&F Brass elbow (¾" x ½") for CPVC pipe

S&F Brass Tee for CPVC pipe 15mm bore dia

S&F Male Brass threaded adaptor for CPVC pipe 15mm bore dia

S&F Female Brass threaded adaptor for CPVC pipe 15mm bore dia

S&F GI tubes 20mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with dia of outlet 75mm complete all as specified.

S&F Cast iron soil, waste and vent pipes 75mm bore, sand cast in any length with or without ears, with cement joints, laid in trenches or in floors all as specified.

S&F Cast iron soil, waste and vent pipes 100mm bore, sand cast in any length with or without ears, with cement joints, fixed to walls all as specified.

S&F of 100mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) complete all as specified and directed.

S&F of 75mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) complete all as specified and directed.

S&F cast iron cowl 75mm

S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F Stack clamps for 75mm bore pipe out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.

S&F Stack clamps for 100mm bore pipe out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.

Dismantling of cast iron or reinforced concrete drain pipes 75/ 100mm dia, jointed in cement mortar and taking out of trenches, if required

S&F in repairs vitreous China squatting pan, Orissa pattern, size 580x440mm, white with integral foot rests, 'P' or 'S' trap including provision of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match complete all as directed.

S&F in repairs vitreous china ware wash down water closet pan (pedestal pattern) white including PVC seat cover with mild steel chromium plated or aluminized hinging device, fixing bolts jointing to flushing cistern and flush pipe anti syphonage pipe etc complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) all as specified and as directed.

M&L for 75mm thick cement concrete type C1, 1:3:6 (using 40mm graded stone aggregate) in plinth protection, laid in bay n.exc. 3.00 sq.m each, finished even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6mm wide joints throughout the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three parts of fine sand by weight) complete all as specified and directed.

S&F in repairs oval type vitreous china counter wash hand basin of size 560x400x205mm, under counter type, including cutting for and pinning in ends of the brackets complete all as specified and as directed. [Model S2030102 of make Cera or equivalent in Jaquar/ Hindware]

S&F in repairs PVC valve less, syphonic action type, flushing cistern with dual flush, 10 litres capacity, low level, white, with inlet, ball valve, float and handle, brackets complete and outlet pipe all as directed.

S&F in repairs Stop valves, 15mm bore, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and as directed

S&F PVC connection 15mm size 450mm long with PTMT nuts on both sides.

S&F in repairs Pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.

S&F in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

S&F corner shelf, fancy type three tier with 5.50mm thick glass mounted on CP brass frame fixed with brass screw & plug, size not less than 450mm complete all as specified.

S&F in repairs brass chromium plated grating doom 100 mm dia complete all as directed.

S&F brass chromium plated Towel rail 'D' type, 600mm long complete all as specified and directed.

S&F brass chromium plated Soap dish complete all as directed.

S&F in repairs 20mm bore gun metal globe or gate valve with iron wheel heads Class-II, screwed both ends for iron pipe all as specified.

M&L for rendering 15mm thick in CM (1:4) on brick or concrete surfaces finishing even and smooth without using extra cement complete including mixing water proofing compound all as specified. [Note: Supply only water proofing compound shall be measured and paid separately]

Supply only liquid water proofing compound.

M&L for rendering 10mm thick in CM 1:3 on surfaces of ceiling finished even and smooth without using extra cement complete including brushing neat cement slurry with 3 kg of cement per sq.m. preparatory to rendering complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls & applying two coats of cement based paint all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

M&L for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment from walls and applying two coats of distemper oil emulsion over a coat of primer over 1.5mm thick white cement based putty including sand papering the puttied surfaces to form an even and smooth surface all as specified and as directed

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing shown on Sl. Page No. 180 of SSR Part-II-2020.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing shown on Sl. Page No. 176 of SSR Part-II-2020.

S&F 300mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F extruded aluminium handle 125mm long fabricated type anodized all as specified.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section.

M&L for preparation of old painted steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 100mm long Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type C-21 all as specified.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing clips/ wooden beads in any size all as specified and as directed.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty/ glazing clips in any size all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel/ aluminium frames glazed with putty or fixed with beads

M&L for 25mm thick cement concrete PCC 1:2:4 type B0 using 12.5mm graded aggregate as in sub base for flooring all as specified

M&L for non skid coloured ceramic joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11sq.m but n.exc. 0.18sq.m, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified.

Use and removal of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface of concrete all as specified

M&L for Reinforced cement concrete (design mix) M-25 grade using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like concrete all as specified.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar all as specified.

M&L for 18-20mm thick Granite work of colour Ruby red/ Telephone black/ Jade black (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 20mm thick screed bed in CM 1:4 complete including rounding and polishing the edges all as specified and as directed.

Excavating manually in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/ loose soil.

Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point.

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25cm in any type of soil.

M&L for concrete bed to drain pipes of 150mm bore dia including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6, type C2 all as specified.

Demolition and breaking up drain pipes of 150 mm bore (salt glazed stoneware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

S&F of 150 mm bore reinforced concrete pipe class NP-2 laid and jointed complete with collars in neat cement slurry complete all as specified and directed.

Taking down carefully aluminium/ copper point wiring for light, fan, socket or power point etc. complete with all fittings and fixtures such as switch piano, ceiling rose, switch socket, pendants etc including making good surface of wall, ceiling etc complete all as specified.

Drawing out old unserviceable existing sub-main wiring of any description from the existing conduit complete all as specified.

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) drawn through and including rigid non-metallic PVC conduit of suitable size not less than 20mm dia, with all fittings, concealed in wall/ roof / floor including pressed steel concealed terminal boxes of required size with top cover of 3 mm thick of plastic laminated sheet of required colour suitable for housing switches/ sockets/ regulators etc. duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan/ bell point controlled by one switch 6 Amps 1 way. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

All as per Item No. 114 herein before but for one 3 pin 6 Amp socket out let point on independent board.

M&L for sub main wiring concealed complete with two runs of 1100 Volts grade 4 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. with one run of 1100 Volts grade 4 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade as earth continuity conductor all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

S&F wall/ surface mounted type LED light fitting 1 X 20 watt (4' long) with extruded aluminum batten with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible three core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed. [Cat. Part No. BN021C LED22S PSU CW GR (SmartBright) of make: Philips or Cat No. ENDURALINEARNEOBS20WLED865SPCWH of make: Havells/ Cat No. CCS-100-20-65-HL2-DP-NWH of make: CG/ Cat No. LL20-221-XXX-65NE3 of make: Wipro]

S&F wall/ surface mounted type LED light fitting 1 X 9 to 12 watt (2' long) with extruded aluminum batten with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible three core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed. [Cat. Part No. BN 021 LED12S 6500 PSU GR (SmartBright) of make: Philips or Cat No. ENDURALINEARNEOBS10WLED865SPCWH of make: Havells/ Cat No. LL20-111-XXX-65NE3 of make: Wipro]

S&F Exhaust fan 300mm sweep, single phase 230V, AC metal body with louvers including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of size 0.75 sq.mm complete including taking down existing exhaust fan and handing over to AGE E/M Store all as directed.

S&F switch piano, flush type SP, one way 5/6 Amps, 230V AC

S&F socket outlet 6 Amp, 2 in 1, 5 pin, 230V AC

S&F ceiling rose PVC/ Poly carbonate isolated body, three terminal complete all as specified.

S&F in repairs sheet steel powder coated distribution board SPN 4 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.

S&F MCB SPN, 240 volts, 40 to 63 Amps, C curve 10 KA all as specified and as directed.

S&F MCB SP, 6 to 32 Amps, 230 V, C curve, 10 KA all as specified and as directed.

Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 16 of tender document i.e. Rs. 34,346.00

ZAIGHAM ENTERPRISES

M/s M Aali construction co

MOHINDER SINGH AND SONS