PROVN OF BICYCLE CUM SCOOTER STAND NEAR BLDG NO P-212, FOOTPATH AND FENCING FOR STP AT CERTAIN LOCATIONS OF MISA CAMP UNDER GE(S) TEZPUR

Amount

Excavating in post holes (or similar holes) in soft/loose soil, each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm around foundation concrete as ordered, watering and removing surplus soil to a distance not exceeding 50 m and making good surface, complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

S&F MS section for post and struts in fencing including cutting tops to shape as directed drilling holes etc and simmilar work including all nesecery work conforming to FE-290 Gde E-165 complete all as specified and as directed.

M & L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation and mass concrete in post holes complete all as specified and directed.

S & F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment, conforming to Grade E-250 (Fe-410 W) quality 'A' complete all as specified and directed.

M & L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161- 1979 grade St.-240 complete all as specified and directed.

M & L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of polyurethane (PU) paint of 1st grade quality over and including one coat of red oxide zinc chrome primer using spray gun to achieve glossy finish complete all as specified and directed.

S&F SRF PVC coated fabric 750 GSM ( with help of 25x3 mm aluminum flat bar) Tensile Strength 200/200 daN/5cm tear strength 20/20 daN/5Cm, adhesion 7/7 daN/5 cm, Surface Treatment, varnish both side PVDF Finished fire retardant, water & fungus proof thicknss of sheet not less than 0.45 mm thick complete all as specified and as directed.

M & L for providing precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes ,drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces joint as directed and setting in CM 1:6 complete all as specified and directed.

M & L for TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for hard core of broken stone or boulders of gauge n.exc 63 mm, deposited, spread & levelled in layers n.exc 15 cm thick watered & rammed to true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base to floors/paths/paving/hardstanding finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

S&F Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M & L for cement concrete type B0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in copings and the like including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of formwork (straight or curved) all exposed surface of concrete finished fair, complete all as specified and directed.

S&F Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3,including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M & L for preparation new or previously untreated concrete or plastered surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality over and including one coat of priming paints plaster coat complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified & as directed.

M&L for rendering 15 mm thick on faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for 15mm thick screed bed in CM 1:6 for laying of floor finish complete all as sfd and directed.

M&L for sand cushioning layer as required and directed by EIC complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for Providing, cement concrete in coping type B1 (1:2:4) using 20mm graded stone aggregate or chamfered on edges complete all as specified and directed

M&L for Cement concrete 1:2:4 type B2 (using 40 mm graded aggregate) as in foundation filling and mass concerete

S&F Mild steel screw bolts dia of neck 6 to 9mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long complete all as specified and directed.

M&L for Preparation of New or previously untreated steel and iron Surfaces of any description, Two coat of Synthetic enamel paint over one coat of Red oxide over 10cm in width or girth,not otherwise described

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out getting out in soft /loose soil.

M & L for PCC 1:4:8 type D2 (40 mm graded stone aggregate) as in foundation..

M & L for M-25 as in foundation incl raft, footing, foundation , beam etc

M & L for M-25 as incolumn ,pillar, piers, posts and struts etc.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M&L for Formwork to sides of pillars, posts, struts, piers, columns, and stanchions

S&F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item no 36 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M & L for applying two coat of cement based paint over one coat of white wash complete all as specified and directed.

M & L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm

S & F Framed work such as gates ,grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, ornamental and intricate design,portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.

S&F Mild steel Plain round bars 10 mm dia Fe-410-W Ged E-250) quality A and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

NOTES: 1. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule "A" notes for details.

BCL (BID ID -3486614)

sanjay upadhya (BID ID -3482006)

M/S H. I. ENTERPRISE (BID ID -3488041)

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3487509)

D G Corporation (BID ID -3487869)