WELCOME MAINT OF MD OFFRS ACCN AT MIL STN YOL

Amount

Preparation of old decorated plastered or unplastered surfaces including cleaning by brooming down or with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and cleaning oil and greasy spots and applying one coat of white wash on walls with mechanical roller, complete all as specified and as directed.

All as per item No. 1 above but one coat of white wash on ceiling with mechanical roller, complete all as specified and as directed.

All as per item No. 1 above but one coat of oil bound distemper on walls with mechanical roller including wall care putty where required, complete all as specified and as directed.

All as per item No. 1 above but one coat of cement base paint on walls external surfaces with mechanical roller, complete all as specified and as directed.

All as per item No. 1 above but two coats of oil bound distemper over a coat of primer with mechanical roller over & including 2mm thick wall care putty on walls, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and as directed.

Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement :4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on other than fair faces of brick wall or on stone masonry or cement concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement :6 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on stone masonry or cement concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and as directed.

Applying two coats of oil bound distemper with mechanical roller over & including 2mm thick wall care putty on newly plastered wall surfaces including preparation of surface, tint and shade as approved by Engr-in-Charge, complete all as specified and as directed.

Applying Two or more coats of 100% Premium acrylic emulsion paint with mechanical roller having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm on newly plastered surfaces complete all as specified and as directed.

Preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Applying one coat of synthetic enamel paint on old wood or wood based surfaces of any description, n.exc. 10cm width or girth when unconnected to other painting or when painted in different tint, including preparation of surfaces, complete all as specified and as directed.

Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of old painted roof sheet steel surfaces by complete removal of existing treatment of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of zinc chrome primer, complete all as specified and as directed by Engr-In-Charge.

Preparation of old decorated painted/plastered wall surfaces including cleaning by brooming down or with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and treating oil and greasy spots and applying one coat of interior emulsion (plastic emulsion paint) with mechanical roller, complete all as specified and as directed by Engr-In-Charge.

Preparation of old decorated painted/plastered wall surfaces including cleaning by brooming down or with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and treating oil and greasy spots and applying one coat of exterior emulsion (acrylic emulsion paint) with mechanical roller including wall care putty where required, complete all as specified and as directed by Engr-In-Charge.

Applying Two or more coats of 100% Premium acrylic emulsion paint with mechanical roller having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm on old decorated plastered or unplastered surfaces of walls as directed by Engr-In-Charge.

Material and Labour for waterproofing of exterior walls, including complete removal of existing plaster including raking out joints and applying two coats of acrylic polymer modified high performance coating (Smartcare Ultra Block 2k) and providing 15mm thick cement plaster in CM 1:4 finished even and smooth all as specified and as directed by Engr-In-Charge. The treatment shall be done from ground level.

Substantial Const. Co. (BID ID -3331436)

SAINI AND SAINI BUILDERS (BID ID -3331596)

m/s Sohan singh barwal and Brothers (BID ID -3330214)

M/S OM SAI RAM BUILDERS (BID ID -3332003)

Him Builders (BID ID -3328535)

KISHAN CONTRACTOR (BID ID -3331233)

Ms Sunil Kumar (BID ID -3330217)