8122/SAR-51/2022-23

Amount

Dismantling of plain or corrugated steel sheeting any gauge in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F plain, black, 1.00mm thick mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and as directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc complete all as specified and directed

M&L brick work with sub class ‘B’ bricks, straight and curved on plan exc 6 mm mean radius built in cement mortar 1;6 complete all as specified and directed.

Taking down cement plaster on brick wall including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L rendering 10mm thick (cement mortar 1:4) on fair/unfair faces of brick or concrete surfaces surfaces rough for receiving subsiquent layer complete all as specified and directed.

M&L rendering 5mm thick (cement mortar 1:4) as second layer on above item no-8 using liquid water proofing compoud @ 2% of cement even smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick (cement mortar 1:6)on fair/unfair faces of brick or concrete surfaces and finished even & smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat of oil bound distemper over a coat white wash complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coat of cement base paint of wall over a coat Priming plastered andother surfaces with alkali?resistant priming paincomplete all as specified and directed.

Dismantling floor, hearth or wall tiling including removing of cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8mm thick (square/rectanglar) area of each tile exc 0.11 sqm but n exc 0.18 sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match,laid over 15mm thick bedding layer of CM 1:4 complete all as specified and directed.

S&F ceramic glazed colured/ design tile in vertical surfaces (350x 250mm) x 7mm/450x350x7mm) thick on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over 10 mm thick plaster in cm 1:3. complete all as specified and directed.

M&L for virified ceramic tiles 10mm thick (Square/rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floors etc. set and joint in neat cenent slurry and pointed in white or coloured cment match laid over 15mm thick bedding layer of CM 1:4 complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8mm thick (square/rectanglar) area of each tile exc 0.11 sqm but n exc 0.18 sqm , as in dado/skirting etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match,over 10mm thick plaster of CM 1:4 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F in repair galvanised stainless steel wire cloth, nominal dia of wire 0.63mm & average width of aperture 1.40mm, and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S & F galvanised stainless steel wire cloth, nominal dia of wire 0.63mm & average width of aperture 1.40mm, and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

M&L for 18-20mm Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Dismantling ceiling board (fiber, pulp, insulated any thickness including cover fillets) complete all as specified and directed.

M&L for false ceiling made out of E-board classic of size 600 x 600 x 4 mm thick, GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with poder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c complete all as specified and as directed by Engineer-in-Charge.

M&L for false ceiling E-board classic of size 600 x 600 x 4 mm thick complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed.

All as item above but exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 Sqm but not exc 2.00sqm, complete all as directed.

Refixing shutters in same opening after taking town, easing & adjusting shutters of any description exc 1 sq. m and not exc 2 sq. m each, complete all as specified and as directed.

S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to GDE Fe410-0 or Fe 310-0 complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed.

S&F for 40 mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side as specified in SSR (Part-I)- 2009 complete all as specified and directed.

M&L 35mm thick IInd class hardwood glazed and skeleton factory made shutters with three panels, open rebated and prepared to receive glass gauge etc, edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutter as specified in SSR (Part-I)- 2009 complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails .MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,bottom rail and lock rail, Paneling of rudraksha colour PVC sheet to be fitted in MS frame welded with and including stainless steel hinges 100mm medium weight complete all as specified and directed.

S&F Steel windows with side hung shutters with glazing bars, dovetailed or welded including projecting type hinges with steel handle, and steel peg stay complete all as specified and directed.

S&F Steel windows with side hung shutters without glazing bars, dovetailed or welded including projecting type hinges with steel handle, and steel peg stay complete all as specified and directed.

S & F for steel ventilators, fixed/ top hung , with glazing bars complete all as specified and as directed.

S&F mild steel framed work as in grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 all as specified and directed.

M&L for preparation of new surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F MS butt hinges 75mm long medium weight cold rolled complete all as specified and directed.

S&F MS butt hinges 100mm long medium weight cold rolled complete all as specified and directed.

S&F aluminum anodized barrel tower bolt 150mm long of extruded section complete all as specified and directed.

S&F aluminum anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed.

S&F aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F aluminum bow handle "D" type anodized 150mm long complete all as specified and directed.

S&F aluminum bow handle "D" type anodized 200mm long complete all as specified and directed.

S & F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140mm complete all as specified and as directed.

S&F in repair Aluminium extruded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixedcomplete all as specified and directed.

S & F in repair double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed by the Engineer-in-Charge

Repair to steel window of any size by replacing worn out hinges or worn out portion such as glazing bars, fitting and fixture positioning of shutters etc. and cleaning the window surrounding and renewal of fitting and fixture (unserviceable) including greasing, oiling and welding complete all as specified and directed.

S&F in repair drapery rod 30mm dia Aluminum fancy type powder coated wood finish including knobs and brackets complete all as specified and directed.

S&F 18/19mm MDF DWR Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 30mm width of flaps Continous (Piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F for 40mm dia cupboard knobs fixed with nut, screws and washer of wooden finish brass polished complete all as specified and directed.

S&F magnet catcher to wooden frame work complete all as specified and directed.

Material and labour for anodiezed aluminum sliding window(bombay sliding window ) made out of hollow section as mentioned below and glazed with tinted colour glass 4 mm thick , fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed.Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm chowkhat top & sides size: 30x26x1.00mm complete all as specified and directed.

Supply and fix aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat Frame:- 101.60x44.45x1.60mm Shutter verticle style :- 85x44.45x1.56mm shutter middle Rail :- 83.50x44.45x1.54mm Shutter Top Rail and bottom Rail :- 114.30x44.45x1.55mm

Taking down aluminium grill any size any type any other description complete all as specified and directed.

Supply and fix anodised aluminum Grill for window made of 6mm dia aluminum bars, size of mesh 50mm X 50mm fixed together with aluminum frame for window complete all as specified and directed.

Fixing only in repairs to aluminum doors shutters swing type or sliding type by taking down frame opening out joints, replacing corner piece/pivot and replacing defective rubber beading (if any) jointing againfixed to frame size of door exec 1.0 sqm but n,exec 3.0 sqm each complte all as specifeid and directed

M&L rendering 5mm thick (cement mortar 1:4) as second layer on above item no-4 using liquid water proofing compoud @ 2% of cement even smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat of oil bound distemper over a coat of chalk whitening complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coat of cement base paint of wall over a coat of alkali resistent primer complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed.

M & L for providing cement concrete 1:3:6 Type B1 using 20mm graded aggregate as in plinth protection, flooring, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed by the Engineer-in-Charge.

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in flooring, padding etc complete all as specified and as directed by the Engineer-in-Charge.

S&F ceramic glazed colured/ design tile in vertical surfaces 450x300x7mm thick on vertical surfaces such as dado and skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over 10 mm thick plaster in cm 1:4. complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8mm thick (square/rectanglar) area of each tile exc 0.11 sqm but n exc 0.18 sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match,laid over 15mm thick bedding layer of CM 1:4 complete all as specified and directed.

Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connection incl removal from site bore of pipe 20mm complete all as specified and directed.

S&F 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

S&F in repair viterous china squatting pan (orissa pattern) long pan size 580x440mm white with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs vitreous chinaware wash down water closet pan padestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe antisyphonage pipe including Heath fusset etc complete all as specified and directed

S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm including CI/MS brackets ,brass CP waste coupling &waste pipe all as directed .

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair 15mm chromium plated brass heath faucet or Jet with all fittings for water closet complete all as specified and directed.

S&F in repair 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long band for out let connection of cistern with WC complete fixing the cistern with wall in pressured connecting with WC complete all as specified and directed

S&F in repair 15mm bore chromium plated fancy type bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed.

S&F in repair chromium plated stop valves/ angle valve cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified and directed.

S&F in repair 15 mm chromium plated Stop valves ( concealed type) , cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm dia pillar taps, cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as directed

S&F in repair 15mm Brass Chromium plated shower roses with swivel joints, minimum size 100mm dia ,inculding arm 200mm long minimum, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair brass CP mixer for mixing hot & cold water for wash hand basin complete all as specified and directed .

S&F in repair brass CP wall mixer for mixing hot & cold water complete all as specified and directed

S&F in repair CP mixer for mixing hot & cold water for kitchen sink complete all as specified and directed

supply and fix in repair brass leg for wall mixture and basin mixture of any description etc, complete all as specified and directed.

S&F in repair 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specified and directed.

Demolition and breaking up drain pipes and fittings of internal dia 75 to 100 mm and under (CI, PVC, AC etc ) set in cement mortar complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and directed.

S&F 75 mm PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting unoin to pipe overall size 915mm x 460mm bowl size 410mm x330mmx 160mm complete aal as directed

Disconnecting and cleaning of existing water storage tanks setting aside (lowering if required) for repair, cleaning etc and hoisted if required reconnecting and refixing in position capacity 500ltr (write cleaning date on tank by paint ) complete all as specified and directed.

Disconnecting and cleaning of existing water storage tanks setting aside (lowering if required) for repair, cleaning etc and hoisted if required reconnecting and refixing in position capacity 1000 ltr complete all as specified and directed.

Disconnecting and cleaning of existing water storage tanks setting aside (lowering if required) for repair, cleaning etc and hoisted if required reconnecting and refixing in position capacity 3000ltr complete all as specified Note:- For item 31,32,33 (i) Writing the date of cleaning and next due date cleaning of the tank by synthetic enamel paint.(ii) The cost of the same shall be deemed included in the respective items

S&F in repair 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including brass float valve with pvc ball complete all as specified and directed.

S&F in repair 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including brass float valve with pvc ball complete all as specified and directed.

Supply and fix in repair 20 mm Ball PTMT valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fix in repair 15 mm Ball PTMT valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fix in repair 32 mm dia PVC waste pipe for WHB 90 cm long with union, complete all as specified and directed. equivalent) complete all as specified and directed.

S&F in repairs small fittings GI medium grade such as sockets,elbow,nipple,tee,union etc for 15mm bore pipe, complete all as specified and directed.

Supply and fix in repair CP grating 125mm dia round fix on floor/ nahani trap fixed with cement mortar, complete all as specified and directed.

S&F in repairs PVC tank lid/cover sintex water storage tank lid cover (cylindrical) for 500/1000 ltrs capacity tanks with GI sheet or nails on top of cover for monkey prevent , complete all as specified and directed.

BRIJ CONSTRUCTIONS