Const Toilet Block RBZ Pedaboddepalli

Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.

Filling of foundations with 2.36 mm HBG chips from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.

P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work

VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for Plinth Beam

VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for Lintel Beam

Providing High Yield Strength Deformed steel bars (Fe 415 -Lap slicing grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work

Brick massonary in C.M. (1:6) prop. with fly ash cement solid blocks of size 290mm x 225mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength for Basement

Brick massonary in C.M. (1:6) prop. with fly ash cement solid blocks of size 290mm x 225mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers with required strength for upt0 3.66 mts

Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers. Basement

Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers. Upto 3.66 mts

Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.

Fabrication, supply and fixing of M.S Pipes including cost and conveyances of all materials,labour charges for welding and fixing charges including all incidental and operational charges etc., complete for finished item of work.

Flooring with Vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Dadooing to internal walls with ceramic tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Cuddapah stone, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) etc., complete for finished item of work as per standard specifications and as directed by the Engineer - in - charge at site of work. for 28.60mm OD pipe SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) etc., complete for finished item of work as per standard specifications and as directed by the Engineer - in - charge at site of work. for 22.20mm OD pipe SDR 13.5

Supplying and Fixing European ISI Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P'trap

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995

Supplying & Fixing Indian makeFlat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock MAT01801

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm x 440 mm (BMW-D.04)

Painting two coats with Synthetic Enamel paint first grade to Old Iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work.

Supply & Fixing of Galvanized / Prepainted G.I.profiled sheets for roofing manufactured by JSW (colouron +) /Jindal/ Tata (Durashine) / any ISI make with the permission of site engineer of AZ 150GSM, of 0.50mm thick fixed to the purlins with 14size self drilling screw with neoprene washers. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25/3mm Butyl tape and the sheets are provided with anti capillary grove.

Painting to new walls with 2 coats of Plastic Emulsion Paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for walls

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant FRLS P.V.C. insulated 1100v grade as per IS:694/1990 sepacification of flexible copper cable (ISI MARK)of makes Polycab/ Havells/ Suncab / Goldmedal/ million/ Fortune art / Paragon / HPL / L & T / Power flex / RPG / Anchor / Bonton in existing pipe with 6A switch and Ceiling rose of makes Goldmedal Olive / Million Zoom / Anchor Penta cherry , and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and Fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium / CRCA housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV, THD<15%, with high power LEDs having efficacy of ≥ 120 lumens / watt with inbuilt and replacable driver with earth connection brought outside and frosted cover CCT: 3000K - 5700K, minimum CRI>70 etc., complete including fixing on wall / Ceiling with PVC/TW round blocks with all accessories including giving connections and all labour charges etc., MAT-03348

Supply and Fixing of 3" (76.2 mm ) Nahany Trap ( without Jali without inlet) UPVC / SWR Pipe fittings (MAT-02002)

Door Frame section of 45x75 MM. The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready / assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2 no.s for horizontal member.

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame andcover of 20 Kg.

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. 75mm dia

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. 110mm dia

Supplying and Fixing European ISI Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'P' trap & Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity with internal components

Supplying & Fixing porcelain foot rest for squatting I.W.C. (Rectangular pair) of sizes 250 mm x 125 mm x 15 mm thick each foot rest 1st quality ISI marked conforming to IS:2556- Part-10:1974

Cost, Supply & Fixing of 12.7mm N.P bib tap Indian make 3heavy duty sort body

CEMENT JALI - 50 mm thick

Laying and fixing of Reflective precast concrete blocks for paving of M35 grade and thickness not less than 60mm for medium traffic areas confirming to IS 15658 :2006 in all shapes and designs as per manufactures specification including cost and conveyance of all materials and all labour charges for loading and unloading, laying to desired lines and levels complete excluding cost of cement, sand, water, electricity etc. complete for finished item work as directed by the Engineer - in - charge at site.(BMT-D.17)