PROVN OF CERTAIN MINOR WORKS IN DS, CAPE/TSM, WDG/CDST AND APDS/NRMA OF NTC BLDG AT DEFENCE LAB JODHPUR

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in soft/loose soil

M&L Cement concrete type D2 1:4:8 (40 mm graded aggregate) in foundations,filling and mass concrete

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

Providing and fixing 4 to 6 mm thick Metal Composite Panel fixed in aluminum doors and partition frames with EPDM rubber / neoprene gasket etc. (Cost of aluminium snap beading shall be paid in basic item) MCP (Metal Composite Panel) Product Description (a) Panel Thickness 4 to 6 mm thick (b) Top/Bottom Aluminium Sheet 0.25 mm (c) Core Thickness 5.5 mm (d) Core Type LDPE (e) Minimum Weight Kg/m2 6.8 Kg/Sqm

S&F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

Point wiring with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and all conduit accessories concealed in wall/ceiling/fixed to roof/truss/cloumn etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity , fabricated branded modular metal flush box concealed in walls with suitable modular inner and outer plate for housing switches, socket out let and fan regulators etc, all as specified and directed for the followings:- (color code to be followed)

(a) One light point controlled by one, one way switch.

(b) One celling fan/Exhaust fan point controlled by one, one way switch.

(c) One socket outlet 6 Amps 5 Pin on independent board

All as per item No 1 here in before but with cable size 4.0 Sq mm for one 6 pin 16 Amps socket out let on independent board for geyser with multistrand insulated copper earth continuity conductor of size 4.0 sqmm all as specified and directed by Engr-in-Charge.( circuit to be laid seperatly )

S&Ffor ceiling rose , 3 pin/pvc/polycarbonate, isolated body

Supply and fixing SP 6 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) in the MCB DB with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.

Supply and fix Exhaust fan heavy duty turbo force steel body AC, single phase 230 volt of size 300 mm sweep 1400 RPM with blades and frame and louvers and connecting up with and including provision of cable 3 core of size 0.5 sqmm (16/0.2 Mm ) from ceiling rose to fan all as specified and as directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm and including provision of cable 3 core of size 0.5 sqmm (16/0.2 Mm ) from ceiling rose to fan all as specified and as directed.

M/L for modular switch 6 Amps single pole one way.

M&L for modular socket outlet 2/3 pin 6 Amps combined 2 module

M/L for modular switch 16 Amps single pole one way, one module

S&F for modular socket combination multipurpose 6/16 Amps, 2/3 pin, 2 module.

S&F White cover plate with frame,1 module

S&F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep

S&F Tube light LED 20 watt

vinayandsons (BID ID -3315323)