NOTICE INVITING TENDER NO. 11 (2019-20), Item No. 8

1. Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR No. 1.10 1.1 Group C DSR No. 1.10.3

2. Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. DSR No. 1.14 2.1 2X1.5 sq mm + 1X1.5 sq mm DSR No. 1.14.1

2.2 2 X 4 sq. mm + 1 X 4 sq. mm earth wire DSR No. 1.14.3

2.3 2X 6 sq. mm + 1 X 6 sq. mm earth wire DSR No. 1.14.4

3. Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR No. 1.25

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. DSR No. 1.31

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. DSR No. 1.32

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. DSR No. 1.33

Laying of one number PVC insulated and PVC Sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required 3.5 X 25 sq mm. DSR No. 7.1.1

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV as required 3.5X25 sq mm DSR No. 9.1.20

Installation, testing and commissioning of pre wired, fluorescent fitting/compact fluorscent fitting of all types, complete with all accessories and tube/lamp etc. Directly on ceiling wall including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthning wire as required DSR 1.41

10 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. DSR No. 1.50 10.1 Upto 450 mm sweep DSR No. 1.50.1

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable as required DSR No. 1.44

12 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthning etc. as required. (But without MCB/RCCB/Isolator). DSR No. 2.4 12.1 6 way , Double door DSR No. 2.4.2

13. Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR No. 2.10 Make :L&T/Siemens/MDS 13.1 Single pole DSR No. 2.10.1

13.2 Double Pole DSR No. 2.10.3

14 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A 2.13.2

Providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubical panel, making connections etc. as required DSR No.2.2.2

Bansal Engineers and Traders

navyakrithdevelopers