Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.9 LAccepted-AOC 154 155 SUBATHU DISTT SOLAN 173206 | SOLAN | SOLAN | HIMACHAL PRADESH | 173206 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹4.2 L+₹29,871 (7.60%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹7,860
Closing Date
19 Sept 2023, 6:00 pmClosed
AGE I R AND D MANALI
AGE I R AND D MANALI PIN 175103 PH 01902255014
PROVISION OF WATER POINT WITH COVERED SHED AND PROVISION OF RO WATER PURIFIER NEAR SUMMER CAMP AT TRANSIT CAMP UNDER AGE I R AND D MANALI
2023_MES_613931_1
AGE(I)/MNL-42/2023-24
Open Tender
Civil Works
Item Rate
180 days
Palchan
As per NIT and Tender Documents
5 documents required · 5 mandatory
₹300
AGE I R AND D MANALI
₹7,860
Yes
14 Dec 2023
17 Aug 2023
27 Sept 2023
17 Aug 2023
19 Sept 2023
31 Aug 2023
Amount
Excavating in hard dence soil for post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed by Engr-in-Charge.
Material and labour for PCC (1:3:6) type C-2, (using 40mm graded stone aggregate) as in foundation, mass fillings for posts/struts etc. complete all as specified and directed by Engr-in-Charge.
S&F for Steel work in tubular trusses including special shaped washer etc steel complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engr-in-Charge.
S&F, Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete all as specified and directed by Engr-in-Charge.
M&L for two coats of synthetic enamel paint on new steel surfaces of any description exc. 10 cm width or girth including preparation of surfaces including one coat of red oxide primer complete all as specified and directed by Engr-in-Charge.
S&F, Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
Removing excavated soil to a distance exc 250M but not exceeding 500 M and depositing where directed etc complete all as specified and directed by Engr-in-Charge.
Surface excavation n exc 30cm deep and averaging 15cm deep in Hard/ Dense soil. complete all as specified and directed by Engr-in-Charge.
Materials and labour for broken stone or boulder hard core of gauge n.exc, 63mm deposited spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface ccomplete all as specified and directed by Engr-in-Charge.
M&L for 100 mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in subbase of floor complete all as specified and directed by Engr-in-Charge.
M&L for 20mm thick Screed bed or bedding layer in cement mortar 1:6 for laying of floor tiles complete all as specified and directed by Engr-in-Charge.
M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc .11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engineer-In- Charge.
M&L for PCC (1;2:4) type B-1 using 20mm graded stone agregete as in roof kerbs or mud stops, rounded or chamfered on edges of interlocking tiles complete all as specified and directed by Engr-in-Charge.
S&F, 1000 ltr Double Lid white loft tank made from durable material (FDA Grade Material) for storing water with 01 Nos of float value to prevent from overflow complete all as specified and directed by Engr-in-Charge.
S&F, 15 mm bore stop valves/angle valves cast copper alloy fancy type , chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes complete all as specified and directed by Engr-in-Charge.
S&F, of PVC (SWR) pipes of 75mm bore single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engr-in-Charge.
S& F, grating doom 100 or 125mm dia of PTMT (Minimum Wt 25 gms) .complete all as specified and directed by Engr-in-Charge.
S&F, GI tubing 15 mm bore medium grade with necessary GI fittings and fixed complete to wall/ceiling with clips, wall hooks, and wooden plugs etc. or laid in floors complete all as specified and directed by Engr-in-Charge.
S&F, bib tap 15 mm bore cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass female complete all as specified and directed by Engr-in-Charge.
S&F ,1000 Ltrs capacity rotational moulded polythene water storage tanks(Cylindrical vertical with closed type) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.
S&F, 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
Supply install testing commissioning of industrial RO water purification plant of capacity 500 lit/hr complete with all accessories incl all neccessery connection Water Purification Plant Comprising of Pretreatment i.e. Raw Water Feed Pump, FRP Multigrade Sand Filter & Antiscalant Treatment Dosing Unit, Reverse Osmosis Block With R.O. Membranes, FRP High Pressure Pump, FRP R.O. Membrane Housing, Micron Filter, Stainless Steel Pump, S.S. Skid, MS Powder Coated Control Panel, UPVC Interconnecting Pipe Lines. Capacity: 500 Liter Per Hour.complete all as specified by Engineer in charge.
Arsh Builder
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .