Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.1 LAccepted-AOC CHANGANACHERRY GENERAL ELECTRICAL WORK | ERNAKULAM | KERALA | 682001 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹31.5 L+₹39,490 (1.27%)Rejected-AOC | L2 | Rejected-AOC second lowest | |
| 3 | L3₹32.2 L+₹1.1 L (3.54%)Rejected-AOC | L3 | Rejected-AOC third lowest | |
| 4 | L4₹33.0 L+₹1.9 L (6.00%)Rejected-AOC | L4 | Rejected-AOC second highest | |
| 5 | L5₹34.0 L+₹2.9 L (9.24%)Rejected-AOC | L5 | Rejected-AOC highest |
| Sl No | Description | Qty | Unit | SRISAKTHI ELECTRICALS L3 | PONNU HYLINE L2 | Biju E.M L4 | KIRAN MG L5 | ELCON ELECTRICALS L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00SITC of DG set | ||||||||
| 1.00 | OD123975/2023-2024:Supply, Conveyance, Installation, testing and Commissioning of 200 KVA CPCB IV+ DG set with standard control panel on suitable CC foundation as per technical details given below :- i. Engine a. Make of Engine : As Specified in the make of material list b. Type of Engine : Diesel Engine c. No. of Cylinders : Suitable to develop the required BHP as per manufacturers’ standard d.Method of Cooling: Water Cooling (with radiator) e. Aspiration : Tubro charged ,inter cooled f. Design : Suitable for generator set application g. Output : BHP ratings specified by the respective manufacturers’ capable of delivering the required power for alternator. " "ii. Standard accessories with Diesel Engine a. Flywheel housing and flywheel to suit single bearing alternator (Close coupled arrangement) b. Air Cleaner c. Coolant Kit d. Fuel Pump e. Electronic governor (backed with mechanical governor if supplied as standard with the set by the manufacturer) f. Fuel filter g. Lubricating Oil filter h. Residential type exhaust silencer iii. Engine Instrument Panel a. Starting switch with key or button b. Lubricating oil temperature guage c. Lubricating oil pressure guage" "d. Water temperature guage e. RPM Indicator with hour meter f. Battery charging ammeter iv. Safety Controls for Engine a. Trip for low lubricating oil pressure b. Trip for high water temperature c. Providing necessary warning system and other safeties as contemplated in relevant ISS d. Fuel shunt off facility at over speed. iv. Fuel Pipe: " "Oil resistant flexible hoses & 25mm dial or nearest size MS pipe as per manufacturers’ requirement for fuel line extension with regulator valve. v. Alternator a. Make : As Specified in the make of material list b. Type : Self exited and self regulated c. Capacity : 200KVA at 0.8PF d. System of Voltage : 3phase, 415V e. Speed : 1500rpm f. Voltage regulation band : +1.00% of rated voltage g. Insulation : Class H h. AVR : AVR shall be provided with a motorized or solid state potentiometer. i. IP rating of enclosure : IP 23 j. Waveform distortion : No load < 1.5%, non- distorting, balanced Linear load <5% k. Telephone interference : Better than 50 l. Total harmonic factor : Better than 2%. Standard control panel with suitably rated MCCB .The characteristics of the DG set shall be such as to operate them in parallel mode. Routine tests as per relevant ISS shall be conducted and test reports of the same shall be furnished at the time of delivery. vii. Fuel tank. Integral type fuel tank of adequate capacity . viii. Battery: Required number of suitably rated fully charged battery with leads and terminals as required as per manufacturers’ requirement. ix, Operation manual, service manual, list of spares etc x. Acoustic Enclosure a. The DG set shall be supplied along with specially designed, company fabricated (to be fabricated in the same company from where the DG set is delivered) acoustic enclosure to meet the stringent MOEF/CPCB norms of 75dBA @1m at 75%load under free field conditions." "b. Sufficient space and clearance shall be maintained inside the enclosure to have optimum serviceability. c. Air inlet louvers shall be designed in such a way as to operate the set at rated load even at 50 degree Celsius enclosure temperature. d. The enclosure shall be with UV resistant powder coating capable to withstand extreme environment. e. Hardware used shall be of only stainless steel make. f. Insulation material shall conform to IS 8183 specifications for better attenuation. xi. Documents to be supplied. a. Engine manual. b. Spares parts book c. Warranty certificate d. Alternator manual & test certificate 1 set control wiring drawing xii. Installation It shall be installed in the pre-constructed concrete bed complying to relevant IS standards, IE rules and as per the direction of the departmental officials. xiii. Testing and Commissioning The DG set shall be tested as per relevant IS standards. Block load testing shall also be conducted. The DG should have capacity to withstand blocked load of at least 55%.Droop characteristics shall also be tested and adjusted for enabling parallel operation. The load required for testing shall be made available at site by the selected agency at his own expenses. "xiv. Warranty: 3 Years, During the 3 year warranty period comprehensive maintenance . The contractor should carry out periodical services as per manufacture's recommendation including supply of necessary consumables such as oil, filters etc and repairs shall be arranged from date of commissioning. The DG shall comply CPCB IV+ norms | 1 | each | 25,50,000 ₹25,50,000 | 25,28,290 ₹25,28,290 | 25,25,000 ₹25,25,000 | 27,00,615 ₹27,00,615 | 24,20,000 ₹24,20,000 Lowest |
| 1.00 | OD105880/2025-2026:Demolishing the existing concrete foundation using necessary power tools/tools and convey the debris to a convenient place as directed by the departmental officers at site. | 3 | cum | 5,400 ₹16,200 | 4,500 ₹13,500 Lowest | 4,500 ₹13,500 Lowest | 4,880 ₹14,640 | 5,000 ₹15,000 |
| 1.00 | 14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement). | 3 | cum | 11,500 ₹34,500 | 10,800 ₹32,400 | 12,500 ₹37,500 | 11,730 ₹35,190 | 10,000 ₹30,000 Lowest |
| 1.00 | OD123992/2023-2024:Supply of HSD for testing of the DG set including loading at the fuelpump,conveyance,unloading at site,filling in the tank etc | 80 | Litre | 130 ₹10,400 | 108 ₹8,640 Lowest | 122 ₹9,760 | 132 ₹10,560 | 120 ₹9,600 |
| 1.00 | OD206758/2023-2024:Supply and Installation of AMF Logic Relay, EC2 Relay in the existing panel board and to made all control wiring with all accessories and make it proper working condition of automatic operation of DG and EB supply | 1 | each | 14,600 ₹14,600 | 14,400 ₹14,400 | 14,000 ₹14,000 | 14,370 ₹14,370 | 12,000 ₹12,000 Lowest |
| 1.01 | OD197352/2024-2025:Supply and fixing of SMPS based Battery Charger suitable for 12/24V DC, 0.5 to 10A capacity and giving connection etc as required. | 1 | each | 6,900 ₹6,900 | 6,300 ₹6,300 | 6,400 ₹6,400 | 6,564 ₹6,564 | 5,500 ₹5,500 Lowest |
| 1.01 | OD206759/2023-2024:Supply and fixing one number 325 (AC1 rating), 4 pole, power contactor with AC coil & with 2 NO & 2 NC auxiliary contacts in the existing panel assembly as required. | 2 | each | 3,900 ₹7,800 Lowest | 34,200 ₹68,400 | 37,500 ₹75,000 | 36,648 ₹73,296 | 33,000 ₹66,000 |
| 1.01 | 90.12.7.35:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 240 sq mm | 50 | metre | 1,665 ₹83,250 | 1,440 ₹72,000 Lowest | 1,750 ₹87,500 | 1,660 ₹83,000 | 1,450 ₹72,500 |
| 1.01 | 9.1.29:Supplying and making end termination with brass compression gland and aluminium lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required.3 1/2X 240 sq. mm (62mm) | 5 | set | 1,250 ₹6,250 | 990 ₹4,950 Lowest | 1,100 ₹5,500 | 1,265 ₹6,325 | 1,100 ₹5,500 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
28 Jul 2025, 6:00 pmClosed
Executive Engineer
Office of the Executive Engineer, PWD Electrical Division, Thrissur
DEPOSIT Providing DG set at Govt Guest House Ramanilayam Thrissur Electrical work General Electrical Work 1
2025_PWD_778314_1
PWD/BLDG/5761/2025-2026
Open Tender
Electrical Works
Item Rate
300 days
Thrissur
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,760
₹50,000
14 Jan 2026
21 Jul 2025
30 Jul 2025
21 Jul 2025
28 Jul 2025
21 Jul 2025
Amount
SITC of DG set
OD105880/2025-2026:Demolishing the existing concrete foundation using necessary power tools/tools and convey the debris to a convenient place as directed by the departmental officers at site.
14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).
OD123992/2023-2024:Supply of HSD for testing of the DG set including loading at the fuelpump,conveyance,unloading at site,filling in the tank etc
OD206758/2023-2024:Supply and Installation of AMF Logic Relay, EC2 Relay in the existing panel board and to made all control wiring with all accessories and make it proper working condition of automatic operation of DG and EB supply
OD197352/2024-2025:Supply and fixing of SMPS based Battery Charger suitable for 12/24V DC, 0.5 to 10A capacity and giving connection etc as required.
OD206759/2023-2024:Supply and fixing one number 325 (AC1 rating), 4 pole, power contactor with AC coil & with 2 NO & 2 NC auxiliary contacts in the existing panel assembly as required.
90.12.7.35:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 240 sq mm
9.1.29:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)
5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
90.16.2.1:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class)
90.16.3.9:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip
90.16.4.8:Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm copper strip
90.16.2.4:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.40 mm dia G.I. pipe ( medium class)
90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)
90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.
90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board
90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet
90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)
90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.
90.14.7:Supply and providing copper earth bus in the panel board
OD105118/2025-2026:Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/equipments including providing suitable size insulated sockets at the termination points or soldered properly,providing numbering ferules for the proper identification of the wiring, keeping the wiring firm by suitable tie/tie mounts/PVC duct etc as required.1.50sq mm wire single run
OD105466/2025-2026: Supply and conveying 100 mm dia ISI marked Tata/ Jintal /equivelent make seem less C- Class MS pipe and cutting in to required length, facing the cutting edges , including conveyance charges to site , and installation / clamping of the same on wall/parapet / cross beams/ ceiling including labour charges for loading, unloading, scrapping, cleaning, removing oil particles if any, painting the pipe with 2 coats of 600°C Heat Resistant Aluminium Paint etc. as per the direction of the departmental officers at site.
OD105465/2025-2026: Supply, and providing MS flanged joint for 100 mm MS pipe, with 12 mm thick MS flanges, including welding the flanges to MS pipes, providing suitable size 5 mm thick / nearest asbestos packing between flanges, and necessary MS bolt and nuts with washers, painting with two coats 600°C Heat Resistant Aluminium Paint etc complete.as per the direction of the departmental officers at site
OD105467/2025-2026: Supply and fabrication 100 mm dia C class 0.5 mtr/required long MS pipe bend by using Tata/Jindal/equivalent make pipe facing the cutting edges painting with two coats of 600°C Heat Resistant Aluminium Paint etc complete.as per the direction of the departmental officers at site
OD105679/2025-2026:Supply and fixing thermal insulation with 25 mm thick glass wool around the MS pipe.
OD105685/2025-2026:Supplying, laying/fixing , 0.63 mm thick aluminium sheet cladding complete with type 3 grade 1 roofing felt strip (as per IS: 1322 as amended up to date at joints etc. as per specifications and as required on existing pipe
90.14.10.17:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A/400A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC
90.14.11.12:MCCB AccessoriesSupply and fixing shunt release for all voltage range up to 630A.
OD206054/2023-2024:Supply & fixing 400/5 A, 5 VA, accuracy class 1, Tape wound Metering CT
90.14.11.15:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 315-630 A
OD123984/2023-2024:Providing and fixing Red, Green, Black, Yellow, Orange colours LED indicator, AC/DC, 22.5 mm cut out dia in existing panel and giving connection complete
OD76120/2025-2026:Providing and fixing Blue colour LED indicator, AC/DC, 22.5 mm cut out dia in existing panel and giving connection complete.
OD123986/2023-2024:Supply and fixing Danger notice board of size, 125 x 75 mm
OD123987/2023-2024:Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision
OD123989/2023-2024:Supply and fixing Digital Multi function meter to read: V, A, F, PF-3 phase accuracy class 1 LED
OD123990/2023-2024:Supply and providing 5/6 kg dry chemical powder type fire extinguisher with accessories fixed on wall in position .
OD123991/2023-2024:Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of redoxide and written with white paint 'FIRE', filled with fine sand, mounted on existing MS angle frame work / wall bracket etc. as required.
OD123993/2023-2024:Supply and providing 2.5mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 11 KV dielectric strength including fixing with suitable synthetic adhesive,
OD105747/2025-2026:Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required 2.5 cm, 4 cm, 5 cm height
1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
OD105749/2025-2026: Supply, conveyance installation testing and commissioning the light fittings made of CRCA sheet with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required. including providing 1200 mm 20 W T8 LED tube , having total efficiency of 100 Lumen /watt with 4 feet Aluminium extrusion in the tube for better heat dissipation,, THD < 20% PF> 0.95 ( LM 79 & LM 80 Certificate from NABL should be submitted )
OD124001/2023-2024:Charges for preparation of Electrical Drawing for submitting to electrical inspectorate for approval
OD198302/2024-2025:Labour charges for dismantling the existing control panel of DG
OD198303/2024-2025:Dismantling and conveyance of existing old 200KVA DG set and keeping at convenient place in the Guest house compound with out damages.
PONNU HYLINE (BID ID -2264740)
SRISAKTHI ELECTRICALS (BID ID -2264416)
Biju E.M (BID ID -2264945)
KIRAN MG (BID ID -2264967)
Bidder Name
Biju E.M
ELCON ELECTRICALS
PONNU HYLINE
KIRAN MG
SRISAKTHI ELECTRICALS
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1274043.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .