PROVN OF DOUBLE STOREY GUARD ROOM AT TCP-I AND TCP-II WITH ATTACH TOILETS OF HQ 135 INF BDE AT ROORKEE MIL STN UNDER GE ROORKEE

Amount

Site Clearance in soft /loose soil except for item No 2, complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m,in all kind of soil, complete all as specified and directed.

Add to item No. 02 for each additional 1.5 m or part thereof in depth beyond the first 1.5 m ,in all kind of soil, complete all as specified and directed.

Returning, filling in, including excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.

Formwork to sides of pillars,posts, struts, piers, columns and stanchions, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats,treads, breaks in floors, window cills,concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Formwork for staircase with sloping or stepped soffits including riser and stringers (excluding landing) complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (design mix M-25) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (design mix M-25) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Reinforced cement concrete (design mix M-25) Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces,carriages, etc., complete, any section straight or winding, but excluding landings; complete all as specified and directed.

M&L for Reinforced cement concrete (design mix M-25) in Columns, pillars, piers, posts and struts complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Ditto all as per item No 16 above but 5 mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks , straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed

M&L for brick work with old size sub class 'B' bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

M&L for Ceiling Plaster cement mortar (1:3) 5 mm thick complete all as specified and directed

M&L for rendering 15 mm thick in CM 1:6 on brick walls finished over and other than fair faces without using extra cement complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on brick walls finished over fair faces without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint by using Roller (Having three years of performance warranty), a coat of exterior water based primer, over 1mm thick wall care putty of same make all as specified and prescribed by manufacture of paint.

S & F pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and directed.

M&L for Cement Concrete in Filling of pressed steel frame , (1:3:6) ,20mm graded stone aggregate, complete all as specified and directed

S & F 30 mm thick flush shutters, Factory Made solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 35mm thick IInd class hard wood glazed skelton shutters Factory Made open rebated and prepared to receive glass,guage etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat complete all as specified and directed.

S&F 30mm thick factory made solid panel PVC door shutters made out of MS tubes of top and bottom rail MS frame shall be covered with heat moulded PVC "C" channel 5mm thick and having width of 50mm for from stiles and H section of 100mm wide for the rails, the inner panel 6mm thick PVC sheet insulated between frame and panel should be struck to the stiles and rails 50x30x5 mm, channel rails 100x30x5 mm H junction. The size, design and pattern of the paneled shutter shall be proceed by GE / Engr-in-Charge and all as per drawing / manufacture instructions including locking device and all necessary fitting etc here and after complete all as specified and directed.

S&F solid PVC door frame of the size 50mm width , 47 mm height with a wall thickness of 5mm(+0.25) made out of extruded 5mmmade out of 5mm PVC sheet reinforced with MS square tube as per specification drying as per manufacture instructions including all necessary fitting complete all as specified and directed.

S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed.

S&F 150mm ordinary helical door spring incl. roller and roller plate complete all as specified and directed

S&F butt hinges 125mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F butt hinges 100mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.

S&F 250mm long alumn. alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed

S & F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S & F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes , framed guard bars, barred iron doors, ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165 complete all as specified and directed.

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed in square not exc. 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed by wooden beads or fixed in steel windows by screws complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over and incl 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 100mm with marble border including rubbing and polishing to yield the mirror finish complete all as specified and directed.

Ditto for skirting with 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in CM (1:3) over the RCC roof surfaces with liquid water proofing compound, complete all as specified and directed. NOTE: WPC will be measured and paid for separately.

Supply only liquid water proofing compound of approved quality complete all as specified and directed.

M & L for roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement with following:- (a) Providing and laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Itr/sqm on dry and clean surface (b) M & L for providing and laying APP based polymeric membrance of 3 mm thinkness of weight of 150 gm / sqm with non woven polyster mat as reinforcement on primed surface by torch application with side laps & joints over laps etc as per manufacturer instruction. (c) M&L for applying a coat of blown bitumen grade 85/25 @ 1.20 Kg/Sqm on top of APP memberane as per manufacturer's instructions. Note:- (i) All the water proofing treatment works shall be got carried out through authorised applicator of the firm. In this regard prior written approval from GE shall be obtained

M&L for Hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

S&F anodised powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer in Charge.

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty complete all as specified and as directed.

M&L for 40 mm thick Damp proof course tohorizontal or vertical surfaces including necessary formwork complete all as specified and directed.

S&F in repiars vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair size 580x440mm white with intergral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed.

S&F PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S&F waste fitting (coupling) brass chromium plated 32mm dia for WHB complete all as specified and directed.

S&F Vitreous China urinal half stall type flat back of size 590 mm x 375 x 390 mm white (minimum) with cp waste fitting grating and union for discharge pipe (excluding flusing cistern, flush pipe) including urinal spreader of CP and PVC waste pipe of adequate length complete all as specified and directed.

S&F 32mm bore and 75cm long PVC waste pipe for WHB complete all as specified and directed.

S&F vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed of capacity 1000 Ltr Capacity complete all as specified and directed.

S&F 20 Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F looking mirror 5 mm thick with and fixed with chromium plated brass screwes and cup washers complete all as specified and directed.

S&F angle/ stop valves chromium plated , fancy type screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

S&F 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank complete all as specified and directed.

S&F 20mm Gun Metal,globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15 MM bore concealed stop valves long shank and cup cast copper allow chromium plated fancy type screwed down high pressure, with capstan handle long shank screwed both ends complete all as specified and directed.

S&F CP brass shower rose 150mm Square size shower with 300mm arm suitable for 15mm bore pipe complete all as specified and directed.

S & F 110mm dia PVC (SWR) pipes sigle socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed

S & F PVC (SWR) bend 110 mm any radius (Tee, Double Tee, Elbow, Socket) complete all as specified and directed

S & F PVC (SWR) pipes single socketed (ISI Mark) in any length with rubber ring joints fixed to wall (75 mm bore) complete all as specified and directed.

S&F PVC (SWR) bends / elbow 75 mm (ISI Mark) complete all as specified and directed.

M & L GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, incl cutting chasing in wall for concealing of pipe if required complete all as specified and directed.

M & L GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified and directed.

Cutting chases, pinning in brick wall , making good to facing where required and pointing in CM 1:3 to ends or edges of slabs and making good cutting exc. 10 cm but n.exc 20 cm girth etc complete all as specified and directed.

S&F towel rail 600mm long 20mm dia brass chromium plated with brackets fixed with wooden guities embeded in cement mortar (1 : 3) with steel screws etc, complete all as specified and directed. ( Make : Prayag Cat No Ba-1S or Equivalent)

S & F Glass shelf of PTMT fixed with and including chromium plated brass screws and wooden plated brass screw and wooden/ plastic cleats (minimum weight 300 gms) Make: Prayag cat no BEA-47AB or Equivalent

Supply and fixing 20mm to 25 mm bore Stainless steel pipe of required length for curtain rod including Brackets and knobs etc ccomplete all as specified and directed

S&F PVC floor trap 100mm dia with CP grating including jointing to waste pipe complete all as specified and directed.

M&L For Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L For Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L For Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L For Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Surface excavation in n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 75 mm thick cement concrete type D2 1:4:8 (40 mm graded agg) as in sub base to floor complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade over 20 mm thick sand made with grey cement and pigment complete all as specified and directed

M&L cement concrete Type B0 1:2:4 (12.5mm graded) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M&L PCC 1:3:6 type C-1 (using 40mm graded stone aggregate) as in surface channel & drain complete all as specified and directed.

M&L for RCC 1:2:4, type B1 (using 20mm graded aggregate) Precast cement concrete as in cover slab for man hole and similar article with plain face incl form work Set in cement mortar 1:4 as in cover slabs of manhole or septic tank, soak pit complete all as specified and directed.

S&F deformed or twisted TMT bar 8 mm dia cut to length, bent to shape required, incl cranking bending and binding with MS wire (annealed) not less than 0.9mm or securing with clips complete all as specified & as directed.

M&L for 100 mm bore (internal dia of pipe) salt glazed stoneware drain pipe grade ‘A’ laid in trenches and jointed with cement mortar complete all as specified and directed.

M&L PCC 1:4:8 type C2 (using 40 mm graded aggregate) as in concrete bed to 100 mm bore drain pipe incl packing under haunching against the sides of pipes after pipe laid and tested complete all as specified and directed.

Construction of septic tank for 10 user designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc complete all as specified in Drg No TD/217 sheet No 1/7 to 7/7.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia X 3 M effective depth complete all as specified in Drg No TD/309 sheet No 1/4 to 4/4.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-

One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all as specified and directed.

One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all as specified and directed.

All as per item No 104 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLS cable as earthwire complete all as specified and directed.

S&F switch piano flush type white finish 5/6 Amps, single pole one way , 230 volts, 50 hz complete all as specified and directed

S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz complete all as specified and directed.

S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz complete all as specified and directed

S &F socket out let 5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz complete all as specified and directed.

S&F fan regulator socket, flush type stepped type, electronic, 450 watt complete all as specified and directed.

M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as specified and directed.

Supply and fix in replacement of MCB distribution board, VTPN, 4 way, 415 V, 3 phase, AC in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

Supply and fix MCCB 100A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed.

S&F Distribution Board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar, earth bar, flush to wall complete all as specified and directed .

Supply & fixing MCB, SPN, AC, 240 volts of 63 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SP, AC, 240 volts of 06 to 40 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply and fix LED batten type body pre-wired with bipin holders,connector block complete with all accessories including 20 Watt (4 feet) retrofit LED tube with Polycorbonate body, full white and connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed. Note: Single / double side connection will be as per direction of Engineer-in-Charge.

Supply and fix in LED mirror light light fitting Integral slim LED batten Integral 9 / 10 watts of 2 feet long internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified and directed.

S&F Angle holders (metal ring) PVC/Poly carbonate type B-22 with back plate,complete with LED bulb 12watts complete all as specified and directed

S&F building security light 30Watt,IP66 LED street light with aluminium pressure die cast housing including brackets made out of 40mm dia GI pipe light grade,bend to shape incliding 02 Nos flat iron clamps, nut & bolts and connection with three core PVC insulated and presheathed copper cable of 0.75 sqmm complete all as specified and directed.

Supply and fix security/search light of capacity 250W, 230V, 50Hz complete with suitable stand tripod typefor moving up/down & left/right and grouting at suitable height including making electrical connection with three core PVC insulated and presheathed copper cable of 1.5Sqmm complete all as specified and directed.

Supply and fix 1200mm sweep ceiling fan complete with blades,down rods,230V, 245 CFM for fixing the fan in ceiling & making good including making electrical connection with ceiling rose complete all as specified and directed.

S&F Exhaust fan PVC body 225/250mm Sweep with louvers, 240volt, single phase including making connection and matching with existing holes incl cutting of wall of suitable dia for fixing of exhaust fan in any type of wall including finishing and making good as per existing surrounded wall ccomplete all as specified and directed.

S&F sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 6.0 Sqmm LT, 1100V grade, drawn through and including adequate sizes PVC non metallic conduit of 20mm / approprite dia with accessories and fittings and one run of 6.0 Sqmm single core multi stranded copper conductor cable as earth continuity conductor complete all as specified and directed.

All as per item No:123 above but of size 4sqmm copper conductor cable

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed

Supply and fix Angle stop valve chromium plated high pressure screwed for iron pipe and fixed complete all as specified and directed.

Supply installation, commisioning of water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity of 40/80Ltrs complete all as specified and directed.

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size). Steel body complete all as specified and directed

S&F Voltage stablizer for automatic operation ,single phase naturally air cooled,indoor type and dsigned for input voltage of 130-280 volts with out put voltage stablized at 230 volt with accracy of +/-2.5% of capacity 2KVA complete all as specified and directed

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron,UL listed, CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 30kg/pit (resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7. The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 40 200mm) and FRLS insulated copper conductor of size 6 sqmm, single core cable drawn through and including medium grade rigid PVC conduit upto 7 mtr incl cutting and chases on wall and floor complete all as specified and directed.

Supply and fix galvanised steel water tubing medium grade of size 20mm bore including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall or ceiling complete all as specified and directed.

Supply and fix galvanised steel water tubing medium grade of size 15mm bore including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall or ceiling complete all as specified and directed.

Supply and fix or lay in trenches galvanised steel water tubing medium grade of size 20mm bore including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in trenches complete all as specified and directed.

Drilling and tapping cast iron water mains (in position) for branch connection of the internal dia of 25 mm complete all as specified and directed.

M&L for Straight plain brass ferrules (or connecting screws ) screwed both ends and fixed to water mains for tapping branch connection of size 25 mm bore complete all as specified and directed.

Supply and Fix Gun metal gate valve, ISI marked, with iron wheel head screwed both ends for iron pipe, fixed in repairs complete of size 20 mm bore complete all as specified and directed.

Supply and Fix Gun metal gate valve, ISI marked, with iron wheel head screwed both ends for iron pipe, fixed in repairs complete of size 15 mm bore complete all as specified and directed.

Excavation in trenches not exc. 1.5 mtr wide and not exc 1.5 mtr depth in any type of soil (soft/loose/hard/dense soil) for laying / taking up/ taking down of water pipes of any size and type including levelling of bottom surface to required level complete all as specified and directed

Removing excavated material from site to a distance n. exc. 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point complete all as specified and directed.

Supply and laying or fixing or passing through pipe 1100volts grade heavy duty cable with XLPE insulated multistranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed 16sqmm nominal cross section,4core in service connections as per IS 7098(Part1) including connecting on LT OH line/LT panel/DB with suitable lugs,glands,binding wire etc complete all as specified and directed

M&L for fine sand free from sharp material as in filling in trenches for cable protection incl necessary punning and consolidation as reqd complete all as specified and directed

S & F GI Pipe light grade of bore size 50 mm for cable protection complete all as specified and directed.

M& L for cutting the existing floor/roads for laying of cable/GI pipe and making good the disturbed surface with PCC 1:2:4 type B1 (using 20 mm stone aggregate) complete all as specified and directed.

Labour and T&P for horizontal boring of hole passing through pavement/road/hardstanding by manual or mechanical means suitable for 50mm bore complete all as specified and directed

M&L for laying bricks in protection covers cables using sub class B old size bricks complete all as specified and directed

AMAR NATH SHARMA

IRFANAHMAD CONTRACTOR

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS

RAJENDER CONSTRUCTION CO

JAHANGIR CONTRACTORS