Rates for New/Repairing of Handpump, submersible and monoblock pump

Amount

Dismantling existing handpump and reassembling after workdone

Replacement of handpump chain

Supplying and erecting ISI mark G.I.pipe 32 mm dia.‘B’ class at position with accessories. As per specification No. CW-PLB/GP

Providing and fitting new metal rod in handpump

Providing and fitting new cylinder in handpump

Nominal reparing of Handpump

Providing and fitting new nut bolt in handpump

Providing and fitting new bearing in handpump

Providing and fitting new pin in handpump

Providing and fitting new water tank in handpump

Reapring of pipe in handpump

Dismantlingthe existing Submersible pump with PVC pipeline

Dismantling the existing submersible pump with GI pipeline.

Rewinding of submersible pump motor in Borewell of all types and makes upto and including 5 HPwith coated copper wires & overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year

Rewinding of submersible pump motor in Borewell of all types and makes above 5 H.P. upto 25 H.Pwith coated copper wires & overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year.

Replacing the existing bearing of approved make for electric motor A.C single phase / 3 phase upto 1 H.P. of all types with due alignment of the shaft and tested.

Replacing the existing bearingof approved make for A.C electric motor 3 phase 2 H.P. to 3 H.P. of all types with due alignment of the shaft and tested

Replacing the existing bearing of approved make for electric motor 5 H.P. & 7.5 H.P. of all types with due alignment of the shaft and tested.

Replacing the existing bearing of approved make for electric motor10 H.P. & 12.5 H.P. of all types with due alignment of the shaft and tested.

Replacing the existing bearingof approved make for electric motor 15H.P.to 20 H.P.of all types with due alignment of the shaft and tested.

Replacing the existing ampere of approved make for electric motor of all types with due alignment of the shaft and tested.

Replacing the existing bushing of approved make for electric motor of all types with due alignment of the shaft and tested.

Replacing the existing sleeve of approved make for electric motor of all types with due alignment of the shaft and tested.

Lethwork

Replacing the existing PVC pipe of motor

Replacing the existing G.I. pipe of motor

Supplying and erecting flat flexible 3 core 1.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erecting flat flexible 3 core 2.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erectingflat flexible 3 core 6 sq mm PVC sheathed submersible typecopper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying & erecting flat flexible 3 core 10 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with coloum pipe assembly complete.

Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.(Similar to Minilec -D2 MPR 2 model)

Supplying and erecting No-Volt-Coil similar to L&T make for motor having DOL starters of MK-1 Type upto 7.5 H.P.

Supplying and erecting No-Volt-Coilsimilar to L&T makefor motor having DOL starters of MU-1 Type from 7.5 H.P. to 10 H.P.

Replacing relay of starter

Nominal reparing of borewell like door, clamp, top and bottom piecec etc.

Supplying and erecting D. O. L. Startersuitable for 250V.single phase, 50 cycleswith overload element with necessarymaterials and connected to supply upto 2 H.P.

Supplying and erecting D.O.L. Starter400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 7.5 H.P. (Similar to L & T make MK-1 DOL Model)

Supplying and erecting D.O.L. Starter400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply for 10 H.P. (Similar to L & T make MN-16 DOL Model)

Replacing 63 amp. Cutout

Rewinding of Monoblock motor of all types and makes above 0.5 H.P. upto 10 H.P with coated copper wires & overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year.

Servicing of monoblock pump

Handpump set india mark II (Including 12 nos. of pipe B class and 12 nos. of connecting rod cylinder and stand assembly etc. As per rate approved by Z.P. mechanical wing jalgaon.

India mark II Handpump fitting & installation charges etc complete as directed by engineer incharge.

Supplying and erecting submersible pumpset of 1 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell

Supplying and erecting submersible pumpset of 3 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell

Supplying and erecting submersible pumpset of 5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell

Supplying and erecting submersible pumpset of 7.5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell

Supplying and erecting submersible pumpset of 10 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell

Supplying & erecting Centrifugal water pump (Monoblock), 230V, Single phase 50 cycles A.C. supply of 0.5 HP of specified discharge head & size of suction, delivery pipes on provided C.C. foundation as per specification No. WP-CGP

Supplying & erectingCentrifugal water pump (Monoblock), 230V, Single phase 50 cycles A.C. supply of 1 HP of specified discharge head & size of suction, delivery pipes on provided C.C. foundation as per specification No. WP-CGP

Supplying & erecting Centrifugal water pump (Monoblock), 230V, Single phase 50 cycles A.C. supply of 1.5HP of specified discharge head & size of suction, delivery pipes on provided C.C. foundation as per specification No WP-CGP

Supplying & erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 2 HPwith discharge 2.2/4.1 Liters per second (LPS) for head of 8/26 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification No. WP-CGP

Supplying & erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 3 HP with discharge 2/4.9 Liters per second (LPS) for head of 14/36 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification No. WP-CGP

Supplying & erecting Centrifugal water pump (Monoblock), 415 V, three phase 50 cycles A.C. supply of 5 HP with discharge 2/4.1 Liters per second (LPS) for head of 36/52 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification No. WP-CGP

Supplying & erecting Centrifugal water pump (Monoblock),415 V, three phase 50 cycles A.C. supply of 7.5 HP with discharge 4.5/8.6 Liters per second (LPS) for head of 32/52 m and 65 mm suction/ 50 mm delivery pipe of size or with discharge of 11.1/19.9 Liters per second (LPS) for head of 16/30 m and 80mm suction/ 65mm delivery pipe of size, on provided C.C. foundation as per specification No. WP-CGP

Supplying &erecting Centrifugal water pump (Monoblock), 415 V, three phase 50 cycles A.C. supply of 10 HP with discharge 9.6/21.6 Liters per second (LPS) for head of 18/40 m and 80 mm suction/ 65 mm delivery pipe of size or with discharge of 4.3/7.8 Liters per second (LPS) for head of 40/64 m and 65mm suction/ 50mm delivery pipe of size, on provided C.C. foundation as per specification No. WP-CGP

roshani electricals And enginners

varad computers