Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 LAccepted-AOC | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹3.8 L+₹2,331 (0.62%)Rejected-Finance 2ND FLOOR 76A PHUL SARAI RANCHI ROAD DISTT RAMGARH JHARKHAND | RAMGARH | JHARKHAND | L2 | Rejected-Finance DUE TO L2 | |
| 3 | L3₹3.8 L+₹4,261 (1.14%)Rejected-Finance DATMA MORE KUJU DIST RAMGARH JHARKHAND 825316 | RAMGARH | JHARKHAND | 825316 | L3 | Rejected-Finance DUE TO L3 |
| Sl No | Description | Qty | Unit | MUSKAN ENTERPRISES L1 | VIDYA ENTERPRISES L2 | NATIONAL ENGINEERING WORKS L3 |
|---|---|---|---|---|---|---|
| 1.00 | A. Maintenance and repair of mobile tyre mounted welding DG set - Cost of Copper Wire for Field Coil {Less scrap value @60% of 24.2 Kg} | 9.68 | KG | 1,011 ₹9,786.48 Lowest | 1,011 ₹9,786.48 Lowest | 1,011 ₹9,786.48 Lowest |
| 2.00 | Cost of Copper Wire for Field Coil {Less scrap value @60% of 12.1 Kg} | 4.84 | KG | 1,091 ₹5,280.44 Lowest | 1,091 ₹5,280.44 Lowest | 1,091 ₹5,280.44 Lowest |
| 3.00 | Cost of Copper strip for Armature {Less scrap value @60% of 14.5 Kg} | 5.8 | KG | 1,010 ₹5,858 Lowest | 1,010 ₹5,858 Lowest | 1,010 ₹5,858 Lowest |
| 4.00 | Cost of Insulating materials @15% for Sl. No.01 to 03 | 1 | SET | 7,847 ₹7,847 Lowest | 7,847 ₹7,847 Lowest | 7,847 ₹7,847 Lowest |
| 5.00 | Cost of Labour @15% for Sl. No. 01 to 03 | 1 | SET | 7,847 ₹7,847 Lowest | 7,847 ₹7,847 Lowest | 7,847 ₹7,847 Lowest |
| 6.00 | Carbon brush(Copper) | 10 | NO | 387 ₹3,870 Lowest | 395 ₹3,950 | 400 ₹4,000 |
| 7.00 | Diaphragm coupling | 2 | NO | 5,800 ₹11,600 Lowest | 5,850 ₹11,700 | 5,900 ₹11,800 |
| 8.00 | Insulator with Brass stud bolt | 4 | NO | 840 ₹3,360 Lowest | 845 ₹3,380 | 850 ₹3,400 |
| 9.00 | Oil Seal(115X140X10) | 1 | NO | 1,250 ₹1,250 Lowest | 1,300 ₹1,300 | 1,350 ₹1,350 |
| 10.00 | Rotary shaft seal(FWE) | 1 | NO | 920 ₹920 Lowest | 930 ₹930 | 935 ₹935 |
Tender Value
₹4.4 L
EMD Value
₹5,600
Closing Date
14 May 2025, 6:00 pmClosed
Assistant Manager (Excavation), RRS Tapin North
Office of the Project Officer, RRS Tapin North, Hazaribagh Area
Repairing and maintenance of mobile tyre welding DG set, welding shop guard plates and air compressor at RR SHOP T/N, Hazaribagh Area.
2025_CCL_334846_1
PO/RRS Tapin North/NIT/25-26/07 Dated 01-05-2025
Open Tender
Excavation Department Work
Item Rate
7 days
BANJI
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,600
4 Dec 2025
1 May 2025
15 May 2025
2 May 2025
14 May 2025
2 May 2025
2 May 2025 - 6 May 2025
Amount
A. Maintenance and repair of mobile tyre mounted welding DG set - Cost of Copper Wire for Field Coil {Less scrap value @60% of 24.2 Kg}
Cost of Copper Wire for Field Coil {Less scrap value @60% of 12.1 Kg}
Cost of Copper strip for Armature {Less scrap value @60% of 14.5 Kg}
Cost of Insulating materials @15% for Sl. No.01 to 03
Cost of Labour @15% for Sl. No. 01 to 03
Carbon brush(Copper)
Diaphragm coupling
Insulator with Brass stud bolt
Oil Seal(115X140X10)
Rotary shaft seal(FWE)
Fuel filter 0.5 Ltr. W/O provision for overflow
Set of Copper washer
Set of ‘O’ rings
Thrust washer
Repairing of 12V Self
Repairing of 12V Alternator
Washing of oil cooler
Rim & tyre repairing & wheel Alignment
Epoxy painting (two or more coats) including appropriate priming coat, preparation of surface, of mobile Tyre mounted Welding DG set
Welder -(02 Person per shift x 3 days)
Fitter – (02 person per shift x 03 days)
Helper – (02 person per shift x 053days)
Repairing of 02 nos. self –Starter (Armature rewinding with commutator repairing)
Repairing of field coil assembly
Battery Charger Repairing , Overhauling, Binding
Repairing work by welding of support plates on mountings using suitable steel electrodes (Electrode - Lomenlt-205)
Repairing of support angle and pivot hinges Cutting electrode for gauging of bulged portion of bended side and cracked portion
Repairing and part replacement of sockets, clamps and holders as per size requirement
MS Plate 5mm for welding
Welder -(02 Person per shift x 3 days)
Helper – (02 person per shift x 03days)
Repair and maintainence of air tank, mountings and base plate by derusting, material filling plate welding and strengthning
Repair and maintainence of air line hoses and wheels set and axle work
Repair and maintainence of blower line,oil free system coil assembly and electrical aseembly unit
Derusting, greasing fine machining refitting and paintwork
Helper – (02 person per shift x 03days)
Total impact of GST for the purpose of CTC
VIDYA ENTERPRISES (BID ID -1152730)
NATIONAL ENGINEERING WORKS (BID ID -1152734)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .