construction of Range office Building Nurpur Forest Range Nurpur Forest Division

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.in all kinds of soil

ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering: - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :in cement mortar 1:6 (1:cement:6 sand)

Corsed rubble masonry (Second Sort )with hard stone in foundation & plinth in cement motar 1:6

Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers Suspended floors,roofs,landing,balconies and access platform.

Centering and shuttering including strutting, propping etc. and removal of form for Stairs,(excluding landing)except spiralstaircases

Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers Under 20 cm Wide.

Suspended floors, roofs, landings, and shelves and their support balconies,beams,girders,bressumers and cantilever upto level.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).2nd class Sal wood.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion. i)Single socketed pipes 100 mm diameter.

Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion. i) Bend 87.5⁰ 110 mm bend.

Supplying and filling in plinth with sand under floors including watering,ramming,consolidating and dressing complete.

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

15mm cement plaster on the rough side of single or half brick wall of mix:in ratio 1:6 (1 cement:6Coarse sand).

6 mm Cement plaster 1:3 (1 cement :3 fine Sand ) finished with a floating coat of neat cement and thick coat of lime wash on top of walls when dry for bearing of R.C.C.Slabs and beams.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Steel work welded in built up sections/framed work,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc.as required In stringers,treadsmlanding etc.of stair,including use of chequrered plate whereever required,all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Second class teak wood

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : i)Second class teak wood 35 mm thick.

Providing and fixing panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows(Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:second class teak wood.

Providing and fixing bright finished brass sliding door bolts anodized colour and shade with bolts and nuts screws etc complete 300x16mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10mm

Providing and fixing ISI marked oxidised M.S. Handles conforming to IS:4992 with necessary screws etc. 125mm

Providing and fixing ISI marked oxidised M.S. Handles conforming to IS:4992 with necessary screws etc. 100mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screwa,etc.complete

Providing and fixing 100mm bright finished hard drawn hooks and eyes. 100mm

Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on undercorated wall surfaces to give an even shade over and including a p. New work(Two or more coats ) over and including thinnable priming coat with cement primer.

Finishing wall with water proofing cement paint of required shade New work (Two or more coates applied @ 3.84 kg/10sqm)

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work(hard & soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new wood.

Making plinth protection 50mm thick with cement concrete 1:3:6 (1Cement : 3Sand : 6 graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing including finishing the top smooth.

Constructing Coursed rubble hammer dressed "U" Shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1 cement : 6 sand) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) including earth work and laying 10cm cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size) and 7.5 cm. cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in.

15mm cement plaster on the rough side of single or half brick wall of mix:in ratio 1:6 (1 cement:6 Coarse sand).

Reinforced cement concrete works in beams, suspended floors,roofs having slope uo to 15° landings,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases above plinth level up to floor five level,excluding the cost of centering,shuttering,finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand):3 graded stone aggregate 20 mm nominal size).

Boulder/brick pieces,gravel filling in soak pit.

Centering and shuttering including strutting, propping etc. and removal of the same complete for

SURYAWANSHI GENERAL ORDER SUPPLIER

MOHAMMAD HAFIZ