CONSTRUCTION WORK OF MODEAL FIRE STATION BUILDING FOR REVENUE SURVEY NO.419 PAIKY, AT- RAJPIPLA DIST - NARMADA, UNDER MODEL FIRE STATION GRANT.

NAME OF WORK :- CONSTRUCTION WORK OF MODEAL FIRE STATION FOR REVENUE SURVEY NO.419

PAIKY, AT- RAJPIPLA DIST - NARMADA

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

5 Schedule - "B"- 5

6 Schedule - "B"- 6

7 Schedule - "B"- 7

8 Schedule - "B"- 8

9 Schedule - "B"- 9

10 Schedule - "B"- 10

11 Schedule - "B"- 11

Total Amount Rs....

Total Amount Rs....

I/We am/are willing to carry out the work @ ________% Above / Below__________Percentage (should be writen

in figures and words) of the Estimated rates mentioned above amount of my/our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 7,09,88,371=00 Put to Tender Rs. 7,09,88,371=00

Add ..............% Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer Engineer

"DESIGN POINT" Rajpipla Nagarpalika

Amreli Rajpipla

Chief Officer President

Rajpipla Nagarpalika Rajpipla Nagarpalika

Rajpipla Rajpipla

RAJPIPLA NAGARPALIKA - RAJPIPLA

DIST :- NARMADA

SCHEAME :- MODEL FIRE STATION GRANT

NAME OF WORK :- CONSTRUCTION WORK OF FIRE STATION

NAME OF LOCATION :- REVENUE SURVEY NO.419 PAIKY, AT- RAJPIPALA DIST - NARMADA

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5M depth including sorting out

and stacking of useful materials and disposing of the

excavated stuff up to all lead and strata

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead and strata

Providing and laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 Machine cut stone aggregate 40mm nominal

size) and curring complete including cost of formwork in (a)

Foundation and plinth

Filling in foundation and plinth with murrum or selected soil in

layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

Providing & Laying controlled cement concrete M-250 and

curing complete including the cost of formwork and Excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundation footing base of column and mass concrete

Providing and laying controlled cement concrete M.250

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (B) COLUMNS: (iii) Having cross-sectional area

more than 0.12Sq.M and upto 0.18 Sq.M

Providing and laying controlled cement concrete M.250

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (B) COLUMNS: (iii) Having cross-sectional area

more than 0.12Sq.M and upto 0.18 Sq.M and additional lift

of concrete for all R.C.C. work above floor two level F.F.

Providing and laying controlled cement concrete M.250

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (B) COLUMNS: (iii) Having cross-sectional area

more than 0.12Sq.M and upto 0.18 Sq.M and additional lift

of concrete for all R.C.C. work above floor two level S.F.

Providing and laying controlled cement concrete M.250

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (A) BEAMS :(ii) Having cross-sectional area more

than 0.08Sq.M and upto 0.12 Sq.M G.F.

Providing and laying controlled cement concrete M.250

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (A) BEAMS :(ii) Having cross-sectional area more

than 0.08Sq.M and upto 0.12 Sq.M and additional lift of

concrete for all R.C.C. work above floor two level F.F.

Providing and laying controlled cement concrete M.250

exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.

work in (A) BEAMS :(ii) Having cross-sectional area more

than 0.08Sq.M and upto 0.12 Sq.M and additional lift of

concrete for all R.C.C. work above floor two level. S.F.

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) for R.C.C lintel including finishing smooth

with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement. G.F.

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) for R.C.C lintel including finishing smooth

with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement.and additional lift of

concrete for all R.C.C. work above floor two level F.F.

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) for reinforced concrete Chhajjas not exceeding 10cm.

thickness upto floor two level including finishing the exposed

surfaces with cement mortar 1:3 (1-cement, 3 Fine sand) to

give a smooth and even surface centering and formwork and

curing complete excluding cost of reinforcement. G.F.

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) for reinforced concrete Chhajjas not exceeding 10cm.

thickness upto floor two level including finishing the exposed

surfaces with cement mortar 1:3 (1-cement, 3 Fine sand) to

give a smooth and even surface centering and formwork and

curing complete excluding cost of reinforcement. and

additional lift of concrete for all R.C.C. work above floor two

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) for reinforced concrete Chhajjas not exceeding 10cm.

thickness upto floor two level including finishing the exposed

surfaces with cement mortar 1:3 (1-cement, 3 Fine sand) to

give a smooth and even surface centering and formwork and

curing complete excluding cost of reinforcement. and

additional lift of concrete for all R.C.C. work above floor two

Providing and Laying controlled cement concrete M.250 and

finishing smooth with curing etc. complete including the cost of

formwork but excluding the cost of reinforsement for R.C.C

work in (iii) Slabs having more than 10 cm and upto 13 cm.

Providing and Laying controlled cement concrete M.250 and

finishing smooth with curing etc. complete including the cost of

formwork but excluding the cost of reinforsement for R.C.C

work in (iii) Slabs having more than 10 cm and upto 13 cm.

thickness and additional lift of concrete for all R.C.C. work

above floor two level F.F.

Providing and Laying controlled cement concrete M.250 and

finishing smooth with curing etc. complete including the cost of

formwork but excluding the cost of reinforsement for R.C.C

work in (iii) Slabs having more than 10 cm and upto 13 cm.

thickness and additional lift of concrete for all R.C.C. work

above floor two level S.F.

Providing & Laying controlled cement concrete M-200 and

curing complete Including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in Stair

Case (E) Staircases excluding landing up to floor two

Providing & Laying controlled cement concrete M-200 and

curing complete Including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in Stair

Case (E) Staircases excluding landing up to floor two

level.and additional lift of concrete for all R.C.C. work

above floor two level F.F.

Providing and laying controlled cement concrete M.200 and

curing complete Including the cost of formwork and

reinforcement for reinforced concrete work in (K) Vertical and

Horizontial its upto floor two level. G.F.

Providing and laying controlled cement concrete M.200 and

curing complete Including the cost of formwork and

reinforcement for reinforced concrete work in (K) Vertical and

Horizontial its upto floor two level. And additional lift of

concrete for all R.C.C. work above floor two level F.F.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete

upto floor two level G.F.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete

upto floor two level and additional lift of reinforcing steel for all

R.C.C. work above floor two level.F.F.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete

upto floor two level and additional lift of reinforcing steel for all

R.C.C. work above floor two level. S.F.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)

Conventional Up to Plingth

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. brick work in

superstructure above plinth level upto floor two level in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional G.F.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. brick work in

superstructure above floor two level in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B) Conventional F.F.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. brick work in

superstructure above floor two level in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B) Conventional S.F.

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement

mortar 1:4 (1- Cement : 4 -coarse sand ) in superstructure

above plinth level upto floor two level. (B) Conventional G.F.

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement

mortar 1:4 (1- Cement : 4 -coarse sand ) in superstructure

above floor two level. (B) Conventional F.F.

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) with Applying two coats

of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

above floor two level for every additional storey height and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-

sand) with Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth. F.F.

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

above floor two level for every additional storey height and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-

sand) with Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth. S.F.

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for plastering on ceilings and sofits of

stairs upto floor two level instead of plastering on walls. upto

floor two level and finished even and smooth in (i)Cement

mortar 1:3 (1-cement:3-sand) with Applying two coats of putty

& two coats of primer of approved brand and manufacture on

new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. G.F.

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for plastering on ceilings and sofits of

stairs for interior plastering above floor two level for every

additional storey height. and finished even and smooth in

(i)Cement mortar 1:3 (1-cement:3-sand) with Applying two

coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for plastering on ceilings and sofits of

stairs for interior plastering above floor two level for every

additional storey height. and finished even and smooth in

(i)Cement mortar 1:3 (1-cement:3-sand) with Applying two

coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

20 MM thick sand faced cement plaster on walls upto height

10meters above ground level consisting of 12 MM thick

backing coat of Cement Mortar 1:3 (1-Cement : 3-Sand) and

8MM thick finishing coat of Cement Mortar 1:1 (1-Cement : 1-

Sand) etc. complete

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 (1 cement 6 coarse

sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse

sand) and jointed with gray cement slurry including rubbing

and polishing complete. (A) Marble slab 25mm thick

Labour Charge half Round Edge for Granite

Providing throating of plaster drip and moulding to R.C.C.

Providing and laying colour digital glazed tiles 6 mm. Thick in

flooring treads of steps and landings laid on a Bed of 12 mm.

Thick cement mortar 1:3 (1 cement : 3 coarse sand) pointing in

white cleaned jointed with white cement slurry

Providing and laying colour digital glazed tiles 6mm thick

skrting risers of steps and dedo on 10mm thick cement plaster

1:3 (1-Cement : 3-Coarse sand) & jointed with white cement

Providing and laying broken China Mosaic Flooring for Terrace

using 12mm to 20mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar crème out upto surface using white cement

including rounding off junctions and extending them up to

15cm. along the wall, clearing with water and oxalic acid etc.

Extra for providing and mixing water proofing material in

Cement concrete in mix proportion recommended by the

manufacturers. (0.18 Kg./1 Sqmt.)

Providing wood work in frames of Doors, windows cleare

story windows and othersimilar works wrought, framede

and fixed in position. (A) Indian Teak Wood

Provoding and fixing flush door shutters, solid core

construction with frame of first class hardwood with cross

board and face veneer or plywood face panels, including

anodised alluminium butt hinges with necessary screws. (B)

Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm thick.

Providing and fixing FRP frame size 100x50 mm and 28mm

thick FRP depress panel shutter having extra reinforcement on

sides & edges in Gel coat finish. The core of the shutter &

frame is to be filed up with injected fire retardant grade

polyurethene foam done in situ alongwith embedded wooden

pieces for stiffening & also taking hinges & fintures. The whole

FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary screws & alluminium

fixtures & fastenings & fastener sleeve.

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x

1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member

size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt ,vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt.

Kg/mt with sliding shutters of horizontal member size

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of

size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with

mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

Providing upto floor two level precast cement concrete jali or

grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone

aggregate 6mm nominal size) reinforced with 1.6 mm dia. Mild

steel wire including roughening,cleaning, fixing and finishing in

cement mortar 1:3 and curing complete. (D) 75mm thick

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts

and nuts or by screws (A) Plain Grill.

Providing and fixing 0.90 mt height stainless (304 Grade) steel

stair railling by top rail of 50mm dia.x16G pipe providing

vertical support of 32x32 Sq. x 16G Pipe and Hori. Supports

Pipe of 16mm x 16G 4 No. Row including grinding, cleaning

and filling the welded spots with SS finish and including of

labour transportation loading, unloading and all tex etc.

Providing and fixing in position callapsible steel shutters with

vertical channels 20 x 10 x 2 mm braced with flat iron

diagonals 20 x 5 mm size with top and bottom rails of T_rin

40x 40 x 6 mm with 38mm dia, steel pulleys complete with

bolts, nuts, locking arrangements, stoppers handles including

applying a priming coat of read lead paint.

Applying priming coat over new steel and other metel surface

after and including preparing the surface by throughly cleaning,

oil,grease, dirt and other foreign matter and scoured with

brushes fine steel wood, scrapers and sand paper with ready

mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

100 mm diameter with jali of the following nominal diameter of

self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i) Square

mouth traps. (A) 100mm x 100mm size P type.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

Providing and fixing screw down bib taps of following size. (A)

Brass screw down bib tap polished bright. (i) 15mm dia.

Providing and fixing Gun metal check or non-return fullway

wheel valve. (E) 40mm dia.

Providing and fixing Gun metal check or non-return fullway

wheel valve. (D) 32mm dia.

Providing and fixing water closet squatting Pan (Indian type

W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste

and trap to be measured and paid for separately) (A) Vitreous

China.(I) Long pattern = colour

Providing and fixing wsh down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand)

(Seal and cover to be measured and paid for separately) (A)

vitreous China Pattern :(i) in colour

Providing and fixing 12.5 Litres low level flushing cistern with a

pair, of C.I. or Mild brackets, complete with fittings such as

lead valve less syphon, 15mm nom.nal size brass ball valve

with polythene float, C.P brass handle unions and couplings for

connections, with inlet, outlet and overflow pipes, 40mm dia.

porcelain enamelled flush bend including cutting holes in walls

and making good the same connecting the flush bend with

cistern and closet (overflow pipe to be measured and paid for

separately) (A) Vitreous China (I) In colour

Providing and fixing G.I. inlet connection for flush pipe with

Providing and fixing plastic seat and cover for wash down

water closer with C.P. brass hinges and rubber buffers. (B)

Black plastic seal and cover.

Providing and fixing washbasin with single hole for pillar tap

with C.I. or M.S. brackets painted white including sutting holes

and making good the same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i)

Providing and fixing C.P. brass waste for washbasin or sink.

Providing and fixing chromium plated brass half trun flush cock

of approved quality including fixing in pipe line etc. complete.

Providing and fixing C.P. brass shower rose with 15mm or

20mm inlet. (A) 100mm dia. Each

Providing erecting and fixing double coated ISI water tank of

required capacity each with all necessary fittings and

connection etc. complete on terrace.

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x

mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such

as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x

mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such

as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all

SS Sink Glosy ASIS 304 Grade x 1mm thick with over all size

610x460 mm & bowl size 560x410x200

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and sand

papered smooth.

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

(B) Providing sock pit of 5.00 Cu.M. Volume including

excavating and filling brickbats with dry masonry work at top

for 45cm. height including covering the top with stone

including providing vatas in C.M. 1:3 with finishing curing etc.

complete as directed.

Providing and laying chequered precast cement concrete tiles

22mm thick with aggegate of sizes upto 6mm in floors, treads

of steps and landings on 20mm thick bed of C.M. 1:6 (1-

cement : 6-sand) or L.M. 1:1.5(1-Lime putty : 1.5 coarse sand)

joint with neat cement slurry with pigments to match the shade

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6- Graded brick bat aggregate 40mm normal

size) and curing complete including cost of formwork in (A)

Foundation and Plinth

Total Amounts Rs.

Total Amounts Rs.

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Rajpipla Nagarpalika

Amreli Rajpipla

Chief Officer President

Rajpipla Nagarpalika Rajpipla Nagarpalika

Rajpipla Rajpipla

RAJPIPLA NAGARPALIKA - RAJPIPLA

DIST :- NARMADA

SCHEAME :- MODEL FIRE STATION GRANT

NAME OF WORK :- CONSTRUCTION WORK OF RESIDENTIAL BUILDING QUARTERS G+3

NAME OF LOCATION :- REVENUE SURVEY NO.419 PAIKY, AT- RAJPIPALA DIST - NARMADA

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5M depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to all

lead and strata

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

out and stacking of useful materials and disposing off the excavated stuff

upto all lead and strata

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size) and curring complete

including cost of formwork in (a) Foundation and plinth

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc.

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in (A) Foundation footing

base of column and mass concrete

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in Column (D) Columns,

Pillars posts and struts upto floor two level G.F.

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in Column (D) Columns,

Pillars posts and struts upto floor two level F.F.

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in Column (D) Columns,

Pillars posts and struts upto floor two level S.F.

Item No. & Description Quantity Rate Per Amount

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in Column (D) Columns,

Pillars posts and struts upto floor two level T.F.

Providing and laying controlled cement concrete M.250 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M G.F.

Providing and laying controlled cement concrete M.250 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M and

additional lift of concrete for all R.C.C. work above floor two level

Providing and laying controlled cement concrete M.250 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M and

additional lift of concrete for all R.C.C. work above floor two level.

Providing and laying controlled cement concrete M.250 exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-

sectional area more than 0.08Sq.M and upto 0.12 Sq.M and

additional lift of concrete for all R.C.C. work above floor two level.

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20mm nominal size) for R.C.C

lintel including finishing smooth with,curing etc. complete including the

cost of formwork but excluding the cost of reinforcement. G.F.

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size) for

R.C.C lintel including finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement.and additional lift of concrete for all R.C.C. work above

floor two level F.F.

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size) for

R.C.C lintel including finishing smooth with,curing etc. complete including

the cost of formwork but excluding the cost of reinforcement.and

additional lift of concrete for all R.C.C. work above floor two level S.F.

Item No. & Description Quantity Rate Per Amount

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size) for

R.C.C lintel including finishing smooth with,curing etc. complete including

the cost of formwork but excluding the cost of reinforcement.and

additional lift of concrete for all R.C.C. work above floor two level T.F.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand

: 4- graded stone aggregates 20 mm nominal size) for reinforced

concrete Chhajjas not exceeding 10cm. thickness upto floor two level

including finishing the exposed surfaces with cement mortar 1:3 (1-

cement, 3 Fine sand) to give a smooth and even surface centering and

formwork and curing complete excluding cost of reinforcement. G.F.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand

: 4- graded stone aggregates 20 mm nominal size) for reinforced

concrete Chhajjas not exceeding 10cm. thickness upto floor two level

including finishing the exposed surfaces with cement mortar 1:3 (1-

cement, 3 Fine sand) to give a smooth and even surface centering and

formwork and curing complete excluding cost of reinforcement. and

additional lift of concrete for all R.C.C. work above floor two level F.F.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand

: 4- graded stone aggregates 20 mm nominal size) for reinforced

concrete Chhajjas not exceeding 10cm. thickness upto floor two level

including finishing the exposed surfaces with cement mortar 1:3 (1-

cement, 3 Fine sand) to give a smooth and even surface centering and

formwork and curing complete excluding cost of reinforcement. and

additional lift of concrete for all R.C.C. work above floor two level S.F.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand

: 4- graded stone aggregates 20 mm nominal size) for reinforced

concrete Chhajjas not exceeding 10cm. thickness upto floor two level

including finishing the exposed surfaces with cement mortar 1:3 (1-

cement, 3 Fine sand) to give a smooth and even surface centering and

formwork and curing complete excluding cost of reinforcement. and

additional lift of concrete for all R.C.C. work above floor two level T.F.

Providing and Laying controlled cement concrete M.250 and finishing

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto 13 cm. thickness G.F.

Providing and Laying controlled cement concrete M.250 and finishing

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto 13 cm. thickness and additional lift of

concrete for all R.C.C. work above floor two level F.F.

Item No. & Description Quantity Rate Per Amount

Providing and Laying controlled cement concrete M.250 and finishing

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto 13 cm. thickness and additional lift of

concrete for all R.C.C. work above floor two level S.F.

Providing and Laying controlled cement concrete M.250 and finishing

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto 13 cm. thickness and additional lift of

concrete for all R.C.C. work above floor two level T.F.

Providing & Laying controlled cement concrete M-200 and curing

complete Including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in Stair Case (E) Staircases

excluding landing up to floor two level. G.F.

Providing & Laying controlled cement concrete M-200 and curing

complete Including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in Stair Case (E) Staircases

excluding landing up to floor two level. F.F.

Providing & Laying controlled cement concrete M-200 and curing

complete Including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in Stair Case (E) Staircases

excluding landing up to floor two level. S.F.

Providing & Laying controlled cement concrete M-200 and curing

complete Including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in Stair Case (E) Staircases

excluding landing up to floor two level. T.F.

Providing and laying controlled cement concrete M.200 and curing

complete Including the cost of formwork but excluding reinforcement for

reinforced concrete work in (K) Vertical and Horizontial its upto floor

two level. G.F.

Providing and laying controlled cement concrete M.200 and curing

complete Including the cost of formwork but excluding reinforcement for

reinforced concrete work in (K) Vertical and Horizontial its upto floor

two level. F.F.

Providing and laying controlled cement concrete M.200 and curing

complete Including the cost of formwork but excluding reinforcement for

reinforced concrete work in (K) Vertical and Horizontial its upto floor

two level. S.F.

Item No. & Description Quantity Rate Per Amount

Providing and laying controlled cement concrete M.200 and curing

complete Including the cost of formwork but excluding reinforcement for

reinforced concrete work in (K) Vertical and Horizontial its upto floor

two level. T.F.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level and

additional lift of reinforcing steel for all R.C.C. work above floor two level.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level and

additional lift of reinforcing steel for all R.C.C. work above floor two level.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level and

additional lift of reinforcing steel for all R.C.C. work above floor two level.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional Up to Plingth

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. brick work in superstructure above

plinth level upto floor two level in Cement Mortar 1:5. (1- Cement : 5 -fine

sand) (B) Conventional G.F.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. brick work in superstructure above

floor two level in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Conventional F.F.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. brick work in superstructure above

floor two level in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Conventional S.F.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. brick work in superstructure above

floor two level in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Conventional T.F.

Item No. & Description Quantity Rate Per Amount

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement :

-coarse sand ) in superstructure above plinth level upto floor two level.

(B) Conventional G.F.

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement :

-coarse sand ) in superstructure above floor two level. (B) Conventional

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement :

-coarse sand ) in superstructure above floor two level. (B) Conventional

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement :

-coarse sand ) in superstructure above floor two level. (B) Conventional

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

cement:3-sand) with Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth. G.F.

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering above floor

two level for every additional storey height and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand) with Applying two coats of

putty & two coats of primer of approved brand and manufacture on new

wall surface to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth. F.F.

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering above floor

two level for every additional storey height and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand) with Applying two coats of

putty & two coats of primer of approved brand and manufacture on new

wall surface to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth. S.F.

Item No. & Description Quantity Rate Per Amount

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering above floor

two level for every additional storey height and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand) with Applying two coats of

putty & two coats of primer of approved brand and manufacture on new

wall surface to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth. T.F.

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for plastering on ceilings and sofits of stairs upto floor two level

instead of plastering on walls. upto floor two level and finished even and

smooth in (i)Cement mortar 1:3 (1-cement:3-sand) with Applying two

coats of putty & two coats of primer of approved brand and manufacture

on new wall surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign matter and sand

papered smooth. G.F.

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for plastering on ceilings and sofits of stairs for interior plastering

above floor two level for every additional storey height. and finished even

and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) with Applying two

coats of putty & two coats of primer of approved brand and manufacture

on new wall surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign matter and sand

papered smooth. F.F.

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for plastering on ceilings and sofits of stairs for interior plastering

above floor two level for every additional storey height. and finished even

and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) with Applying two

coats of putty & two coats of primer of approved brand and manufacture

on new wall surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign matter and sand

papered smooth. S.F.

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for plastering on ceilings and sofits of stairs for interior plastering

above floor two level for every additional storey height. and finished even

and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) with Applying two

coats of putty & two coats of primer of approved brand and manufacture

on new wall surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign matter and sand

papered smooth. T.F.

20 MM thick sand faced cement plaster on walls upto height 10meters

above ground level consisting of 12 MM thick backing coat of Cement

Mortar 1:3 (1-Cement : 3-Sand) and 8MM thick finishing coat of Cement

Mortar 1:1 (1-Cement : 1-Sand) etc. complete

Item No. & Description Quantity Rate Per Amount

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 (1 cement 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light shade

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) and

jointed with gray cement slurry including rubbing and polishing complete.

(A) Marble slab 25mm thick

Labour Charge half Round Edge for Granite

Providing throating of plaster drip and moulding to R.C.C. Chhajja.

Providing and laying colour glazed tiles 6 mm. Thick in flooring treads of

steps and landings laid on a Bed of 12 mm. Thick cement mortar 1:3 (1

cement : 3 coarse sand) pointing in white cleaned jointed with white

Providing and laying colour glazed tiles 6mm thick skrting risers of steps

and dedo on 10mm thick cement plaster 1:3 (1-Cement : 3-Coarse sand)

& jointed with white cement slurry.

Providing and laying broken China Mosaic Flooring for Terrace using

12mm to 20mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar crème out

upto surface using white cement including rounding off junctions and

extending them up to 15cm. along the wall, clearing with water and oxalic

acid etc. as directed.

Extra for providing and mixing water proofing material in Cement

concrete in mix proportion recommended by the manufacturers.

Providing wood work in frames of Doors, windows cleare story

windows and othersimilar works wrought, framede and fixed in position.

(A) Indian Teak Wood

Provoding and fixing flush door shutters, solid core construction with

frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2) 35 mm

Item No. & Description Quantity Rate Per Amount

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP

depress panel shutter having extra reinforcement on sides & edges in

Gel coat finish. The core of the shutter & frame is to be filed up with

injected fire retardant grade polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also taking hinges & fintures.

The whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of

S.S hinges with necessary screws & alluminium fixtures & fastenings &

fastener sleeve.

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm (of Jindal

Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member

size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07

Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal

Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of

0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of

Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /

Rmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm

@ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt

with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complete for window.

Providing upto floor two level precast cement concrete jali or grill 1:2:4

mix (1- Cement : 2- coarse sand : 4-graded stone aggregate 6mm

nominal size) reinforced with 1.6 mm dia. Mild steel wire including

roughening,cleaning, fixing and finishing in cement mortar 1:3 and curing

complete. (D) 75mm thick

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws (A)

Providing and fixing 0.90 mt height stainless (304 Grade) steel stair

railling by top rail of 50mm dia.x16G pipe providing vertical support of

32x32 Sq. x 16G Pipe and Hori. Supports Pipe of 16mm x 16G 4 No.

Row including grinding, cleaning and filling the welded spots with SS

finish and including of labour transportation loading, unloading and all tex

Item No. & Description Quantity Rate Per Amount

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the

surface of all dirt, dust and other foreign matter.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete. incl. excavation work (i)

Inside dimensions 455mmx 610mm and 450mm deep for single

Providing and fixing screw down bib taps of following size. (A) Brass

screw down bib tap polished bright. (i) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(E) 40mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(D) 32mm dia.

Providing and fixing wsh down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and

paid for separately) (A) vitreous China Pattern :(i) in colour

Item No. & Description Quantity Rate Per Amount

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of

C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections, with inlet, outlet and

overflow pipes, 40mm dia. porcelain enamelled flush bend including

cutting holes in walls and making good the same connecting the flush

bend with cistern and closet (overflow pipe to be measured and paid for

separately) (A) Vitreous China (I) In colour

Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan

Providing and fixing plastic seat and cover for wash down water closer

with C.P. brass hinges and rubber buffers. (B) Black plastic seal and

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

550 mm x v 400mm size. (i) In colour.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete. (ii) 25mm dia.

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.

(A) 100mm dia. Each

Providing erecting and fixing double coated (ISI) water tank of required

capacity each with all necessary fittings and connection etc. complete on

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

Item No. & Description Quantity Rate Per Amount

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

SS Sink Glosy ASIS 304 Grade x 1mm thick with over all size 610 x

mm & bowl size 560 x 410 x

Item No. & Description Quantity Rate Per Amount

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and

filling brickbats with dry masonry work at top for 45cm. height

including covering the top with stone including providing vatas in C.M. 1:3

with finishing curing etc. complete as directed.

Total Amounts Rs.

Total Amounts Rs.

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Rajpipla Nagarpalika

Amreli Rajpipla

Chief Officer President

Rajpipla Nagarpalika Rajpipla Nagarpalika

Rajpipla Rajpipla

RAJPIPLA NAGARPALIKA - RAJPIPLA

DIST :- NARMADA

RAJPIPLA NAGARPALIKA - RAJPIPLA

NAME OF WORK :- CONSTRUCTION WORK OF COMPOUND WALL WITH GROUND DEVELOPMENT

NAME OF LOCATION :- REVENUE SURVEY NO.419 PAIKY, AT- RAJPIPALA DIST - NARMADA

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Clearing and grubbing road land including uprooting rank

vegetation grass, shrubs, sapling and trees girth upto 300mm

removal of stumps of trees cut earlier and disposal of

unserviceable materials (A) By manual means in area of light

0.60 80243.79 Hectare

Earthwork in cutting in all sorts of soil and soft murrum including

conveying and putting the stuff in spoil bank maintaining minimum

distance of five meter between top edge and cutting and toe of

Excavation for foundation upto 1.5 m depth including sorting out

and stacking of useful materials and disposing off the excavated

stuff upto all lead and strata

Excavation for foundation depth from 1.5 to 3 m depth including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto all lead and strata

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse

sand : 6 Machine cut stone aggregate 40mm nominal size ) and

curring complete including cost of formwork in (a) Foundation and

Providing and casting in situ controlled cement concrete M-200 for

R.C.C. return as per drawings including centering shuttering,

scaffolding where necessary, laying vibrating, curing and finishing

complete.(A) Height from 0.0 to 5.0 M. (1) Piers (2) Abutment

(3) RCC return.

Providing and laying in position FE 500D TMT bar reinforcement

including cutting, bending, hooking and tying complete as per

detailed drawings for the following.(A) Piers (B) Abutments (C)

Providing & laying weep hole in Aburtments, and returns by using

A.C. pipe of 100mm including laying in proper grede and jointing

the completed as per detailed specification

Providing and laying controlled cement concrete M.250 exposed

work with curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C. work in (B)

COLUMNS:(ii) Having cross-sectional area more than

Sq.M and upto 0.18 Sq.M

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse

sand : 6- crushed stone aggregates 20 mm nominal size) and

curing complete including cost of formwork in (A) Wall Caps /

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Providing 15 mm thick cement plaster by using Ready Mix Mortar

for plaster in single coat on rough (similar) side of single or half

brick walls for interior plastering upto floor two level and finished

even and smooth in Cement mortar 1:4 (1 Cement : 4 sand)

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts and

nuts or by screws (A) Plain Grill.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning,

oil,grease, dirt and other foreign matter and scoured with brushes

fine steel wood, scrapers and sand paper with ready mixed priming

paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter.

Providing and fixing 1.20 Metre High Fencing with 2.0 Metre long

M.S. Angle posts 40mm x 40 mm x6 mm and oil painting 3 coats

fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of

galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre,

strained and fixed to posts with G.I,staples including fixing the

postsin ground with 0.50M x 0.50M x 0.50M block in C.C. 1:5:10

Providing and laying coloured glazed tiles of the size 300 mm x

200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of

steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement :

coarse sand) & jointed with white cement slurry.

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand)

and jointed with gray cement slurry including rubbing and polishing

complete. (A) Marble slab 25mm thick

Providing and laying weep hole in abutment and return by using

A.C. pipes of 100mm diameter including laying in proper grade and

jointing the completed as per detailed specification.

Point wiring for Light/ Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in below type of pipe erected

with 6A Modular type switch/ bell push & accessories and earth

continuity of following type, erected on PVC/ Metallic/ Wooden box,

single mounting base frame covered with textured/ metallic front

plate modules erected on /in wall/ ceiling as per pipe erected, with

necessary Lamp holder/ ceiling rose/ HD Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ ceiling complete. Cat. III

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS:513/ CRCA polyester powder coated and high U.V. &

corrosion resistance with diffuser and/or Polycarbonate optics with

company mark/ name 120 to 300 V,Power Factor more than 0.9,

THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaire efficacy> 85 lumens/ watt, LED driver efficiency> 85%

as per approved vender list make make LED used for luminaire.

(Each fitting required LM-79 & LM-80 Certificates) 12W LED Cross

Laser Outdoor Water Proof Exterior Wall Step up down left Right

Light Fixture Water Proof Lamp Black Finish (WARM WHITE), Cat-

Miniature circuit breaker single pole 6A to 32A suitable to operate

on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned

in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisturefor long time

Necessary test report must be

submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil Length of

Back filling compound- 1 Nos Bag of 15Kg.

Cast iron earth plate size 30 X 30 X 0.35 cms. buried in specially

prepared 2.5 Mtr. deep earth pit complete with necessary G.I. strip

in G.I. pipe 2 Mtr. long with coupling and G.I. plug for earthing of

switch gear, conduit run or power plug etc.

For using salt and charcoal/ coke as required for pipe type

Supplying and stacking of good earth at site including royalty and

carriage upto 5 k m lead complete (earth measured in stacks will

be reduced by 20% for payment).

Supplying and stacking of well decayed cattle manure at site

including royalty and carriage upto 5 k.m. lead complete (Cattle

manure measured in stacks will reduced by 8% for Payment).

Supplying and stacking of Fine sand at site including royalty and

carriage upto 5 k.m. lead complete.

Providing New Plantetion for Flower tree, Decorative outdoor

plants etc.including The work including cost of all materials, labour,

plantation with expertise, tranportation, loading, unloading, all

taxes etc. complete with Five years operation and maintanance

after the plantation. The work carried out as per directed by

Engineer-in-charge

Ixora coccinea of height 25-30 cm

Croton Golden plant, having ht. 45 cm to 60 cm

Euphorbia milli hybrid variety,having ht.30 to 45 cm

Areca palm, having ht.1.20 m to 1.50 m

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Rajpipla Nagarpalika

Amreli Rajpipla

Chief Officer President

Rajpipla Nagarpalika Rajpipla Nagarpalika

Rajpipla Rajpipla

RAJPIPALA NAGARPALIKA - RAJPIPALA

RAJPIPALA NAGARPALIKA - RAJPIPALA

NAME OF WORK :- CONSTRUCTION WORK OF R.C.C. ROAD

NAME OF LOCATION :- REVENUE SURVEY NO.419 PAIKY, AT- RAJPIPALA DIST - NARMADA

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a

base for road work including removing the excavated stuff and depositing

on the road side slope as directed upto all lead and strata

Construction of granular sub-base 150 mm thick by providing coarse

graded machine crushed B.T. material satisfying MOST specification of

grading I (B.T. stone aggregate 53 mm to 26.5 mm 35 %, 26.5 to 4.75 mm -

45 % and 2.36 mm below - 20 % )including spreading in uniform layer with

motor grader on prepared surface, mixing by mix in place method with

rotavator at OMC and compacting with vibratory roller to achieve the

desired density etc. complete.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete

including cost of formwork in (a) Foundation and plinth

Providing and Laying in position Controlled Concrete M-300 grade

concrete for using cement content as per approved design mix, improve

workability without impiring strength and durability as per direction of the

engineer in charge. (min cement level as per latest ID: 456 shall be

maintained) for 150mm thick trimix C.C Road with trimix vaccume

dewatering system work with power trowling sheet form with M.S Channel,

surface vibrator with providing road expansion joint having size

6mmx50mm by concrete cutter machine and filled with bitumen, finishing

with floor hardener necessary all equipments, all labour charges complete.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Rolling and consolidation using vibratory road roller 8 - 10 tonne capacity

(incl. watering)(A) Earth work (layer not exceeding 200mm thickness)

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Rajpipla Nagarpalika

Amreli Rajpipla

Chief Officer President

Rajpipla Nagarpalika Rajpipla Nagarpalika

Rajpipla Rajpipla

RAJPIPAPLA NAGARPALIKA - RAJPIPALA

SCHEAME :- MODEL FIRE STATION GRANT

NAME OF WORK :- PROVIDING AND LAYING 300MM DIA R.C.C. STORM WATER PIPE GUTTER

NAME OF LOCATION :-REVENUE SURVEY NO.419 PAIKY, AT- RAJPIPALA DIST - NARMADA

SCHEDULE - "B-5"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff

upto all lead and strata

Supplying and fixing reinforced concrete heavy duty non-pressure

pipes with collars for culverts carrying heavy traffic as per IS 458-

1991 specifications including setting the pipes in C.M. 1:2 watering

and laying (to level or slopes) of class NP3 of following internal

daimeters.(i) 300mm dia.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-

coarse sand : 4-graded stone aggregate 20mm nominal size)

foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick

bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of

neat cement and making channels in cement concrete 1:2:4 mix (1-

Cement :2-Coarse sand :4-stone aggregate 20mm nominal size)

finished smooth complete including curing and festing (i) Inside size

900mm x 1200mm and 1.5M. deep including C.I. cover with frame

size 560mm diameter total weight of cover and frame to be not less

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With

230mm thick walls of brick msonry using brick having crushing

strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm

diameter sewer.

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Rajpipla Nagarpalika

Amreli Rajpipla

Chief Officer President

Rajpipla Nagarpalika Rajpipla Nagarpalika

Rajpipla Rajpipla

RAJPIPALA NAGARPALIKA - RAJPIPALA

DIST. :- NARMADA

SCHEAME :- MODEL FIRE STATION GRANT

NAME OF WORK :- CONSTRUCTION WORK OF 2.00 LAC LITER CAPACITY SUMP

NAME OF LOCATION :- REVENUE SURVEY NO.419 PAIKY, AT- RAJPIPALA DIST - NARMADA

SCHEDULE - "B-6"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Preparing structural design of RCC Under Ground / Partially

under ground / above high ground level Reservoir of required

capacity as per relevant I.S.s and constructing the same,

including excavation in all types of soil strata (including rock)

including shoring strutting if required, for loose soil / to protect

from collapse due to near by traffic load, casting 100 mm thick

P.C.C. leveling course in M-10, Refilling the pit with proper soil

and disposing of the surplus stuff within a lead of 50 meters.

Including cement plaster in CM 1:2 with approved water proofing

compound to inside water touching surface to container. Including

all types of labour and material charges of lowering, laying,

erecting / hosting and jointing of pipe assembly to inlet, outlet

overflow, washout and bye pass arrangement as per hydraulic

Providing and fixing accessories like MS / GI Ladder, CI Manhole

frame and cover, water level indicator, adequate cowl type

ventilators or lantern type ventilator with stainless steel jail.

B.B. Masonry chambers for valves. Providing and applying three

coats of cement paint / snowcem to the out side face of structure.

It also includes satisfactory water tightness test as per relevant

I.S. code and painting name of scheme and capacity on the tank

as per direction of engineer in charge.

List of Indian Standards for Design of GSR / SUMP:-

The structural design of GSR shall be in accordance with

provisions relevant I.Ss.

(1) I.S. 3370, Part – 1 to 4, 1965 or latest revised.

(2) I.S. 456 – 2000 or latest revised.

(3) I.S. 1893 – 2000 – 1984 or latest revised.

(4) I.S. 875, Part – 1 to 3, 1987 or latest revised.

General Specifications:-

(1) Water depth in container shall be adopted as per data of

tender. If water depth is not specified the suitable water depth /

acceptable to field engineer in accordance with hydraulic

requirement shall be adopted for capacity.

(2) Shape of container (in plan) specified by in data shall be

adopted in absence circular shape shall be adopted.

(3) Size shall be fixed as per availability of space (land area)

at site / acceptable engineer in charge.

(4) Effect of overlapping of pressure bulbs on soil due near by

structure and proposed sump should be considered.

(5) Care shall be taken that no damage should occur to

nearby existing structure. Compensation shall be paid for the

same by agency.

(6) The minimum concrete grade for RCC shall be M-30.

(7) HYSD Fe 415 / 500 grade reinforcing bars confirming to

I.S. 1786 / 1139 shall be considered in design. CRS / TMT bars

shall be provided. In saline atmosphere corrosion resistance

stainless steel / HCR rebar shall be provided. Any other steel can

be used with approval of C.E./ in situation of non availability in

market without extra cost.

Item No. & Description Quantity Rate Per Amount

(8) Minimum size (or thickness) of various components shall

be provided as per tender criteria / specifications in absence as

per I.S./ Std. practice of G.W.S.S.B. Minimum dimensions

specified for various components in tender data / specifications

shall be provided without fail.

(9) The safe bearing capacity (SBC) shall be referred from

SBC test report. In absence of report it shall be referred from data

sheet. If poor soil is found / water table is met with during

excavation SBC shall be scientifically ascertained and design

shall be revise. No extra shall be paid for increase in quantity.

(10) CI pipes and special shall only be used if type is not

specified in tender.

(11) The rate shall include cost of dewatering during excavation

making all arrangement when water table meets within depth.

(12) The structure shall be designed properly to resist uplift due

to ground water table specified in data or actual ground water

table meets with during excavation. No extra shall be paid. If

GWT / Uplift is mentioned in tender and during excavation it dose

not meet 7.5% rate shall be reduced.

(13) GI pipes railing shall be provided when sump is more than

meter above ground level.

(14) Appearance of structure should be aesthetically good

looking acceptable to authority.

(15) Any charge in size, shape, depth below GL, height above

GL, water depth, F.B., size of member etc can be permitted in

exceptional case due to site condition or hydraulic design

requirement by C.E. No extra shall be paid for change.

(16) Any charge in data, dimensions, shape, water depth,

reduction in size if permitted by competent authority and if it

reduces quantity then payment shall be reduced prorate.

(17) When capacity of GSR / Sump is > 20 lakh liters two or

suitable compartments acceptable to executive engineer shall be

designed and provided.

(18) Agency shall engage qualified (at least graduate) consulting

engineer for designing the structure and he / she shall visit the

site for guidance of work.

(19) 75% part rate shall be payable for concrete, reinforcement

and plastering items of container until satisfactory hydraulic

testing for water tightness is performed as per tender condition.

Till the work shall be treated as incomplete.

Above conditions / general specifications Sr. No. 1 to 19 are part

and parcel of tender (contact) and prevail over other provisions in

4. Cost of 2.00 lacs litre capacity

Item No. & Description Quantity Rate Per Amount

As above rectangular sump with Without water table (Sub

soil water level Below foundation) 2.00 lacks lit. capacity

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Rajpipla Nagarpalika

Amreli Rajpipla

Chief Officer President

Rajpipla Nagarpalika Rajpipla Nagarpalika

Rajpipla Rajpipla

RAJPIPALA NAGARPALIKA - RAJPIPALA

DIST. :- NARMADA

SCHEAME :- MODEL FIRE STATION GRANT

NAME OF WORK : CONSTRUCTION WORK & DRILLING OF 300 MM DIA.& 50 MTR DR BORE

NAME OF LOCATION :- REVENUE SURVEY NO.419 PAIKY, AT- RAJPIPALA DIST - NARMADA

SCHEDULE - "B-7"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Geohydrological ground water investigations incl. vehicle charges

(b) For three phase DTH bore / DR tube well incl. water sample testing

charges 4.00 14286.00 No.

Drilling of 300mm dia pilot bore hole in alluvial strata by direct rotary

rig / reverse rotary rig. 100.00 857.00 Mtr.

Reaming of 400mm dia 100.00 261.00 Mtr.

Providing and supplying in standard length ISI mark rigid unplasticised

PVC pipes suitable for potable water with ring fit joint including cost of

rings, as per IS specification no. 4985/1988 including all local and

central taxes, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the departmental stores

and including cost of jointing meterial etc. complete Test Pressure

kg/cm² 280mm dia

Job work of slotting of 280mm PVC blank pipe of following size having

slot size as 6.75 cm x 6.35 cm x 3.12 mm (including unloading of

blank pipes from truck & reloading slotted pipes into truck). 592.00 0.40 Slot

Lowering of 280mm dia UPVC blank casing pipe 40.00 60.00 Mtr.

Lowering of 280mm dia UPVC slotted casing pipe 60.00 60.00 Mtr.

Providing and fixing bore plug having 100mm height made from M.S.

plate with 3 holes at equal distance on circumference for nut-bolts

type, locking arrangement with nuts-bolts & lock nuts of standard

From 5mm thick MS plate suitable for 280mm dia pipe

Supplying approved make electric motor driven Borewell submersible

pump set conforming to I.S. 8034 and motor conforms to IS-9283

working at 3 phase 400/440 volt 50 C/S A.C. supply & 2900 R.P.M.

Cat. LD 6.0, 400 LPM, 60 Mtr. Head, 10.00 HP

Supplying & installation Control panel board DOL / Star Delta starter

suitable for local & remote pump control application consisting of

MPCB, overload relay and contactors as per Type II coordination

including digital voltmeter,analogue ammeter with selector switch, run

hour meter, required protective relays & control accessories.

(D) S.D from 8 to 10 HP

Item No. & Description Quantity Rate Per Amount

Supplying & installation PVC insulated flat submersible copper cable

as per detailed technical specifications of R/C of GWSSB conforming

to IS 694, IEC 60227 /

Manufacture, Supply and delivery of following ISI marked H.D.P.E.

Pipes (IS:4984/1985 with latest amendment) having material Grade

PE-80 in approximate 100 mtr. coil length or as per GWSSB

requirement with SS-316 nipple at both end having 11 TPI threads as

per specification, press fitted and bolted having nominal diameter as

under as per detailed Technical Specification. Rates of Exclusive of

Manufacture, supply and delivery of clamps made from M.S. plate with

3 holes on either side with nuts & bolts of standard make and suitable

900 mm x 100 mm x 16 mm flat suitable to 300 mm dia pipe 2.00 2265.27 Pair

Lowering / lifting of 3 phase submersible pump set with HDPE pipe

and cable into bore well with necessary fitting accessories by means

of mechanised derrick / chain pulley / fixtures and jointing the cable

with fuse unit / control panel board including satisfactory testing.

(A) up to 90 meter depth 2.00 1800.00 Job

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Rajpipla Nagarpalika

Amreli Rajpipla

Chief Officer President

Rajpipla Nagarpalika Rajpipla Nagarpalika

Rajpipla Rajpipla

RAJPIPALA NAGARPALIKA - RAJPIPALA

SCHEAME : MODEL FIRE STATION GRANT

NAME OF WORK : PROVIDING, ERECTING & INSTALLATION OF STREET LED LIGHTING

NAME OF LOCATION : REVENUE SURVEY NO.419 PAIKY, AT- RAJPIPALA DIST - NARMADA

SCHEDULE - "B-8"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

required depth for laying any size of cable or locating the fault all over

the run and back filling the same and making the surface as normal

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene (conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

cable (A)50 mm outer dia

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required. (e) One wire 6.00 sq. Mm

(g) One wire 16.00 sq. Mm

Supplying and erecting Flexible PVC insulated multi strand multi core

1.1 kv grade ISI marked copper wires of following size to be erected as

directed. e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying and erecting LED Street Light/ Flood Light Fittings with High

Power White LEDs wattage of 3 Watt and above assemble on single

MCPCB, efficiency more than 130 Im/w and corrosion free high

pressure dia cast aluminum housing with smooth finish powder coated

and hit sink extruded aluminum with diffuser and Polycarbonate

optics/lenses with company mark/name engraved or embossed 120 to

300 V, Power factor more than 0.95, THD<10%, CCT 5000 K to

5700K, Uniformity ratio >0.45, Luminaire efficiency >

Lumens/Watt, LED driver efficiency >85%. as per approved vender list

make (Each fitting required LM-79 & LM-80 Certificates) (A) Street

Light (IP-65), Surge -4KV (f) Above 60 watts to 90 watts Cat-lll

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of

cables (b) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of

(e) 4 core 25 Sq. mm

Item No. & Description Quantity Rate Per Amount

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables. (e) 2 to 4 core

Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts

in an approved manner. (C) 16/25 Sq.mm.

providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828

in existing box having following capacity (b) 40 Amp. Cat.III

providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having

normal current rating up to 25 A to 100A. with Fixed thermal &

magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

ICS=100% of ICU only Cat III (With Encloser) add 10% extra

Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated current

/ cross section area) duly wrapped with colour insulating tape for phase

sequence of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary connections. (A)

Suitable for 100 Amp. Capacity

Providing & erecting weather proof, dust & vermin proof, floor mounted

front operated indoor type cubical panel board necessary IP-42 and

above protection as per approval from engineer incharge made from

14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel shall

be painted with epoxy powder coating.

Item No. & Description Quantity Rate Per Amount

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size.

(C) The standard companies switch gear shall be used and only

manufacturers at CPRI approved factory as per IEC 61439 for

beneficial use.

(i) with 350mm depth

Providing , erecting , fabricating the M.S. structure as per requirement

on site incorporating proper size of M.S. angles,square,round, flats,

bars, channels, sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide with erection on site

as per direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

Supplying and erecting approved make suitable panel indicator lamps

of LED type lamp, lens cover, Bakelite holder complete erected with

necessary connections.

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and

heavy duty cover.(approved make OEM has to submit test certificate)

& having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted. (a)

For Electrical Installation up to 440V in normal soil Length of pipe

- 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Annealed bare Copper wire 8 to 16 SWG.

Providing and erecting Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth

For using salt and charcoal / coke as required for pipe type earthing.

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated

with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend

local wind speed with integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for cable

termination to be erected on foundation as per details given by

manufacturer considering site requirement.

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness

with 225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm

Providing and erecting street light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with suitable B

Class M.S. sleeve tubing of approx. 45cms.length and suitable for

mm / 80mm. / require size pole top having sufficient fasteners for fixing

the brackets and having spread of 1 mtr. length with suitable rise as

per site condition & suitable welded stiffener reducer and nipple with

check nut complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint with following nos

of arms.[A] Single Arm bracket 1 Mtr

Supplying and erecting HYLAM sheet on existing angle iron frame.for

following thickness 12mm

Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum &

LCD display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic enclosure

& transparent cover erected as required with necessary connection

erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch

complete erected as per direction Cat III [D] 4 pole 440V 40 Amp.

Providing and fixing Terminal board of size 5.0 x 127 x

mm.bakelite sheet with suitable brass studs with nuts, washers and

clamps of size 25mm x 3mm suitable for pole painted with one coat of

red lead paint.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Rajpipla Nagarpalika

Amreli Rajpipla

Chief Officer President

Rajpipla Nagarpalika Rajpipla Nagarpalika

Rajpipla Rajpipla

RAJPIPALA NAGARPALIKA - RAJPIPALA

DIST :- NARMADA

SCHEAME :- MODEL FIRE STATION GRANT

NAME OF WORK : ESTIMATE FOR C.C.T.V CAMERA SURVEILLANCE SYSTEM AT MODEL FIRE STATION

LOCATION : REVENUE SURVEY NO.419 PAIKY, AT- RAJPIPALA DIST - NARMADA

SCHEDULE - "B-9"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing and Fixing IP NVR 32 channel ds-7632ni-k2 with all

standard fittings, accessories as per the manufactures specification, for

windows as directed, the rate shall be included all materials, hardware

and labour etc. All the work shall be carried out as per the instruction

and drawings, material will be approved by engineer in charge.

Providing and Fixing POE switch 8 port. with all standard fittings,

accessories as per the manufactures specification, for windows as

directed, the rate shall be included all materials, hardware and labour

etc. All the work shall be carried out as per the instruction and drawings,

material will be approved by engineer in charge. 5.00 5555.00 No.

Providing and Fixing IP IR 4 MP Bullet Camera ds-2cd1047g0-l with

all standard fittings, accessories as per the manufactures specification,

for windows as directed, the rate shall be included all materials,

hardware and labour etc. All the work shall be carried out as per the

instruction and drawings, material will be approved by engineer in

charge. 30.00 8080.00 No.

Providing and Fixing 8TB HDD. with all standard fittings, accessories as

per the manufactures specification, for windows as directed, the rate

shall be included all materials, hardware and labour etc. All the work

shall be carried out as per the instruction and drawings, material will be

approved by engineer in charge. 2.00 25250.00 No.

Providing and Fixing Cemera Box with all standard fittings, accessories

as per the manufactures specification, for windows as directed, the rate

shall be included all materials, hardware and labour etc. All the work

shall be carried out as per the instruction and drawings, material will be

approved by engineer in charge. 30.00 55.55 No.

Providing and Fixing Cat 6 Double Coated Cable with fitting charge

with all standard fittings, accessories as per the manufactures

specification, for windows as directed, the rate shall be included all

materials, hardware and labour etc. All the work shall be carried out as

per the instruction and drawings, material will be approved by engineer

in charge. 1000.00 55.55 No.

Providing and Fixing Camera installation charge with all standard

fittings, accessories as per the manufactures specification, for windows

as directed, the rate shall be included all materials, hardware and labour

etc. All the work shall be carried out as per the instruction and drawings,

material will be approved by engineer in charge. 30.00 353.50 No.

Providing and Fixing Junction box for poe 2 1600 with all standard

fittings, accessories as per the manufactures specification, for windows

as directed, the rate shall be included all materials, hardware and labour

etc. All the work shall be carried out as per the instruction and drawings,

material will be approved by engineer in charge. 4.00 1212.00 No.

Providing and Fixing Power cable 2 core with all standard fittings,

accessories as per the manufactures specification, for windows as

directed, the rate shall be included all materials, hardware and labour

etc. All the work shall be carried out as per the instruction and drawings,

material will be approved by engineer in charge. 4.00 1212.00 Bunddle

Providing and Fixing Pole with all standard fittings, accessories as per

the manufactures specification, for windows as directed, the rate shall

be included all materials, hardware and labour etc. All the work shall be

carried out as per the instruction and drawings, material will be

approved by engineer in charge. 4.00 1515.00 No.

Providing and Fixing Rack 6U with all standard fittings, accessories as

per the manufactures specification, for windows as directed, the rate

shall be included all materials, hardware and labour etc. All the work

shall be carried out as per the instruction and drawings, material will be

approved by engineer in charge. 1.00 8080.00 No.

Providing and Fixing Wireless P2P Device with all standard fittings,

accessories as per the manufactures specification, for windows as

directed, the rate shall be included all materials, hardware and labour

etc. All the work shall be carried out as per the instruction and drawings,

material will be approved by engineer in charge. 2.00 5050.00 No.

Providing and Fixing 1 KV U.P.S With Battry with all standard fittings,

accessories as per the manufactures specification, for windows as

directed, the rate shall be included all materials, hardware and labour

etc. All the work shall be carried out as per the instruction and drawings,

material will be approved by engineer in charge. 1.00 60600.00 No.

Providing and Fixing Internet 1 Year with all standard fittings,

accessories as per the manufactures specification, for windows as

directed, the rate shall be included all materials, hardware and labour

etc. All the work shall be carried out as per the instruction and drawings,

material will be approved by engineer in charge. 1.00 20200.00 Year

Providing and Fixing L.E.D 32" with all standard fittings, accessories as

per the manufactures specification, for windows as directed, the rate

shall be included all materials, hardware and labour etc. All the work

shall be carried out as per the instruction and drawings, material will be

approved by engineer in charge. 1.00 13635.00 No.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Rajpipla Nagarpalika

Amreli Rajpipla

Chief Officer President

Rajpipla Nagarpalika Rajpipla Nagarpalika

Rajpipla Rajpipla

RAJPIPALA NAGARPALIKA - RAJPIPALA

DIST :- NARMADA

SCHEAME :- MODEL FIRE STATION GRANT

NAME OF WORK : ESTIMATE FOR PROVIDING, SUPPLYING, AND INSTALLATION OF FIRE HYDRANT AND

FIRE ALARM SYSTEM

NAME OF LOCATION :- REVENUE SURVEY NO.419 PAIKY, AT- RAJPIPALA DIST - NARMADA

SCHEDULE - "B-10"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying installing testing and commissioning approved make

centrifugal pump end suction type couple to eclectic mortar of suitable

HP, Fitted on a common base frame and rated for fire duty, Including

nos. pressure gauge fitted on suction & delivery side of the pump. the

pump shall run on 400/440V, 3ph, 50 hz electric supply, duty of pump

1400 LPM, @ 50 mtr head, control panel shall be specification. (cost of

control panel is not included) 1.00 205000.00 No.

Supplying installing testing and commissioning approved make

centrifugal jockey pump end suction type couple to eclectic mortar of

suitable HP, Fitted on a common base frame and rated for fire duty,

Including 1 nos. pressure gauge fitted on suction & delivery side of the

pump. the pump shall run on 400/440V, 3ph, 50 hz electric supply, duty

of pump 180 LPM, @ 70 mtr head, control panel shall be specification.

(cost of control panel is not included) 1.00 91000.00 No.

D.G SET 45 kVA generator model with a prime power output of

kVA, 26kW and a standby output of 50, 40kW at 0.8 power factor,

phase, 4 wire, 415/240/ 400/230/380/220 Volts, 50 Hz at 1500 RPM.

The complete generating set is mounted in a heavy gauge steel,

weatherproof and acoustic enclosure. 1.00 585000.00 No.

Providing, fixing, testing & commissioning of cubical type floor mounted

power cum Fire Pump control panel complete with suitable switch gear,

bus bars, relays, contractors, indicating lamps, fuses, instruments

manual isolator & auxiliary switch including connections complete as

required. (Contractor should submit GA Drawing for approval before

deliver the Panel at Site) 1.00 107000.00 No.

100mm 4" FOOT Valve, IS 4038, Cat No. CI FOOT VALVE (IS1538 T-

4 & 6), PN0.2 Flg FF IS 1538 Tbl 4&6 Cast Iron BODY,Cast Iron Door,

Hing Pin NA, Door Facing: Nat Rubber 2.00 7250.00 No.

Providing, fixing, testing and commissioning of below Cable for Fire

Pumps (Only from Panel to Pumps)

3.5C x 25 sqmm Alluminium Armoured cable. 50.00 280.00 Rmt.

3C x 6 sqmm Alluminium Armoured cable. 50.00 160.00 Rmt.

Providing, fixing, testing & commissioning of Glicerin Filled 100mm dia

dial type Pressure Gauge and range of 0- 15Kg / c m2 2.00 2575.00 No.

Providing, fixing, testing & commissioning of Pressure Switches for

automation of fire pumps. Pressure switches shall be double pole

single throw type suitable tor 3 phase supply with diaphragm.

Aluminum Enclosure with IP 66 protection as required.. 2.00 3325.00 No.

Providing, fixing, testing & commissioning of C.I. Butterfly valve PN16

conforming to IS:13095/BS :5155 with Flanges, Gl Nut bolts, Gaskets

completed as required.

Providing, fixing, testing and commissioning of C.I. Dual plate type Non-

Return Valve class PN 16 rating with fittings, flanges, nutbolts,

washers, gaskets etc. of sizes:

Supply, Installation, Testing and Commissioning of Brass Forged Ball

Valves with all fittings required.

Providing, fixing, testing and commissioning of Above Ground gi. ERW

C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS:

3589 (upto 200 mm dia. And above) including cutting, screwing,

welding etc. and providing all fittings like flanges, bends, tees, elbows,

reducers, clamps, hangers etc. with painting of one coat of primer and

2 or more coats of synthetic enamel paint of approved make / shade

complete as per specification.

Supplying, installing and commissioning of C.I. Flanged "Y" type

Strainer with SS mesh, suitable flanges, nuts, bolts, gaskets etc.

Providing, fixing, testing and commissioning of Under Ground G.I.

ERW C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and

IS: 3589 (upto 200 mm dia. And above) with IWL/pypecoat, 4mm

thickness wrapping and coating and providing all fittings like flanges,

tees, elbow, fasteners with all required.

Providing, fixing, testing and commissioning of SS Single Headed

Oblique Pattern Hydrant Landing Valves as per IS: 5290 with 80 mm

dia flanged inlet & 63 mm dia female outlet complete with cap and

chain etc. 5.00 6042.00 No.

Providing, fixing, testing and commissioning of SS Branch Pipe with

nozzle of 25 mm nominal bore outlet suitable to fit with standard

instanteneous type 63 mm dia coupling. As per IS:903 5.00 1602.00 No.

Providing, fixing, testing and commissioning of 63 mm dia 15m long

RRL Hose Pipe with 63 mm dia. Type A Male and female Stainless

Steel couplings duly binded with Gl wire, rivets etc. conforming to IS

636 as required. 5.00 4150.00 No.

Providing, fixing, testing and commissioning of weather proof standard

fire Hose Cabinet wall mounting type 18 Guage. (750 * 600 * 250)

having Double Opening with M.S. fabricated stand, necessary locking

arrangement by allan key. 5.00 4586.00 No.

Providing, fixing, testing and commissioning of Wall mounting Fix type

First aid Fire Hose Reel with drum, hanging bracket, 36M * 25 mm dia

high pressure hose reel tubing as per IS:884 with shut nozzle and ball

valve and all required accessories. 7.00 7280.00 No.

Providing, fixing, testing and commissioning of CI 4 way Fire Brigade

Inlet as per IS: 904 having 63 mm dia inlet with 150 mm dia Butterfly

valve blank cap and chain with necessary fittings, flanges, nutbolts etc.

(For System filling) 1.00 16000.00 No.

Providing, fixing, testing and commissioning of 25 mm dia Air Release

Valve and Ball Valve assembly on top of each riser for Air release

system. 2.00 2330.00 No.

Supplying, Installation, Testing and commissioning of ABC type 6 Kg

Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored

Pressure Type, Pressure Gauge, Controllable discharge mechanism

Class A, Rating 3A & Class B rating 21B as per IS 15683 ISI MARK

(ABC Dry Chemical Powder - MAP 50%). 8.00 2118.00 No.

Providing & fixing of Carbone dioxidetype 4.5kgs. Type Controllable

discharge mechanism applicable on Class B and electric Fire Rating 8.00 6500.00 No.

SITC of Analogue conventional Smoke Sensor which is fully

compatible with Analogue conventional Protocol, having removable

high performance chamber with fire LED's allow 360 degree viewing, U

Pulsing/non-pulsing controlled from panel. 8.00 4248.00 No.

SITC of Analogue conventional Manual Call Point with, Analogue

conventional Protocol having, Bi-coloured status LED 6.00 7080.00 No.

SITC of Intelligent Loop Powered Wall Sounder Beacon, Variable

Sound Output 90 dB 6.00 10620.00 No.

SITC conventional 2 zone fire alarm panel 2.00 18500.00 No.

Supply & Laying of 2 C X1.5 Sqmm FRLS Copper Armoured Cable.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Rajpipla Nagarpalika

Amreli Rajpipla

Chief Officer President

Rajpipla Nagarpalika Rajpipla Nagarpalika

Rajpipla Rajpipla

RAJPIPALA NAGARPALIKA - RAJPIPALA

DIST :- NARMADA

SCHEAME :- MODEL FIRE STATION GRANT

NAME OF WORK : SUPPLYING, FIXING OF ELECTRICAL WORK AT FIRE STATION AND STAFF QUARTERS

NAME OF LOCATION :- REVENUE SURVEY NO.419 PAIKY, AT- RAJPIPALA DIST - NARMADA

SCHEDULE - "B-11"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose / H.D.Connector as directed-

Cat. III (a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete 305.00 419.15 No.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity

of following type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.Cat. III (a) with

medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete 87.00 598.93 No.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

accessories.-Cat. III [I] For 6A Plug and 6 a switch with 2-1.5

sq.mm Cu. Wire from nearby switchboard/mcb db board (a) with

medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete 98.00 445.41 No.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board.-Cat. III) (a) with medium class Rigid PVC pipe

and accessories erected flushed on wall/ceiling complete 66.00 669.63 No.

Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate modules

erected on / in wall / ceiling with following type accessories.Cat. III) 85.00 241.39 No.

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires erected in below type of

pipe with 6A Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary batten/angle holder

or ceiling rose or H.D.Connector as directed. -Cat. III) (a) with medium

class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete 92.00 530.25 No.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size (A) With medium class Rigid

PVC pipe and accessories (a) 2 wire 1.5 sq. mm 2800.00 59.59 No.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size (A) With medium class Rigid

PVC pipe and accessories (b) 2 wire 2.5 sq. mm 3100.00 78.78 No.

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required. (a) One wire 1.00 sq. mm 2080.00 11.11 Rmt.

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having

normal current rating up to 25 A to 100A. with Fixed thermal &

magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. Cat-lll 1.00 6173.12 Rmt.

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. and above at 415 V .

having normal current rating 250A. with variable thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing

G.M.S. housing. Cat-lll 2.00 20946.39 Rmt.

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. at 415 V. having

Normal current rating 200A.with variable Thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S.housing Cat-lll 3.00 16221.61 Rmt.

Providing and erecting Approved make Three pole moulded case

circuit breaker having breaking capacity/strength ICU of 50 K.A. and

above at 415V. having normal current rating 250A. with variable

thermal & magnetic release suitable to work on A.C.supply 50 c/s. with

all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. Cat-lll 1.00 22285.65 Rmt.

Providing and erecting Approved make Three pole moulded case

circuit breaker having breaking capacity/strength ICU of 35 K.A. at

V. having normal current rating 125A.with Fixed thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing

G.M.S. housing. Cat-ll 1.00 4845.98 Rmt.

Supplying and erecting triple pole & neutral 440V/ 500V panel

mounting Aluminium Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating tape for phase

sequence of following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each busbar,erected

in existing cubical panel with necessary connections. (C) Suitable for

300 Amp. Capacity 2.00 1469.55 Rmt.

(A) Suitable for 100 Amp. Capacity 2.00 660.54 Rmt.

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark. Cat.III 170.00 112.11 No.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity (a) 6 to 32 Amp. Cat.III

(a) 40 Amp. Cat.III 3.00 668.62 No.

(a) 63 Amp. Cat.III 8.00 737.30 No.

Providing & erecting 415 V MCB three Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828

in existing box having following capacity (a) 6 to 32 Amp. Cat.III

(c) 63 Amp Cat.III 2.00 716.09 No.

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for following

Max. rating erected as directed. (i) 25 Amps.DP Cat.III 3.00 1969.50 No.

(ii) 40 Amps.DP Cat.III 31.00 2235.13 No.

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing (b) sheet steel

double door (iv)12 way 14.00 1492.78 No.

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) (b) sheet steel double

door (ii)6 way 1.00 2913.85 No.

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door (IP54)

fitted with copper insulated busbar, isolated neutral bar, earth bar and

DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, suitable for

63/100 AMP TPN MCCB + RCCB as incomer and three phase

outgoing as per following .(The DBs should be used of same company

of MCB to be used) (A)4 way outgoing 1.00 5817.60 No.

Providing and erecting metallic vitrified danger notice board as per

language suggested by engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551. 3.00 69.69 No.

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value

of earth resistance of installation duly stamped and signed by agency

and officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test

report must be submitted by Agency. [C] For Electrical Installation

covering Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like Automation,

SCADA)i.e. independent Earthing located in other than normal

soil i.e. Soft Rock, Marshy Soil etc.. -Length of Pipe : 3 Mtrs. -Back

filling Compound :2 nos Bags of 25 Kg.

Providing and erecting required size HOT deep Galvanised iron strip

for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors

etc. using proper clamp. 5.00 77.77 Kg

Providing and erecting required size Copper strip for earthing of H.T.

OCB / ACB/ Transformer, LT panel board, Motors etc. using copper

clamp. 2.00 794.87 Kg

Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 2.00 794.87 Kg

Providing & erecting weather proof, dust & vermin proof, floor mounted

front operated indoor type cubical panel board necessary IP-54 and

above protection as per approval from engineer incharge made from

14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of (The

rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size. (B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (ii) with 550 mm. Depth

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables.

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 5.00 281.79 Mtr

(E) 3 1/2 core 95 Sq. mm ( 50 Sq.mm 1/2 core) 60.00 484.80 Mtr

(I) 3 1/2 core 240 Sq. mm( 120 Sq.mm 1/2 core) 5.00 1161.50 Mtr

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of

cables. (A) 4 core 4 Sq. mm 20.00 115.14 Mtr

(B) 4 core 6 Sq. mm 150.00 124.23 Mtr

(c) 4 core 10 Sq. mm 30.00 138.37 Mtr

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(B) 4 core 25 Sq. mm 280.00 188.87 Mtr

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or floor

of following size of cable. (A) 3 core 2.5Sq. Mm 40.00 213.11 Mtr

(C) 3 core 6 Sq. mm 100.00 393.90 Mtr

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or floor

of following size of cable. (B) 4 core 4 Sq. mm 15.00 364.61 Mtr

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

cable. (D) 120 mm outer dia. 300.00 137.36 Mtr

Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts

in an approved manner (A) 1.5/ 2.5/4/6 Sq.mm 24.00 6.06 Ea

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts

in an approved manner. (A) 1.5/2.5 to 6 Sq.mm 104.00 8.08 Ea

Providing and erecting Approved make Ceiling fan with double ball

bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing hook or clamp with earthing.

[Make shall be approved by Engineer in charge] 87.00 1596.81 No.

Supplying & erecting approved make low noise decorative exhaust fan

having square frame ABS body with inbuilt lowers & square frame.

250mm with 1350 RPM Cat.II 35.00 1366.53 No.

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit

and blower motor with its accessories by means of extra supplied

proper insulated copper tubing,drain PVC pipes suitable for ( cost

includes Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting. (B) for 1.5 ton

capacity 35.00 30930.24 No.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminium housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85% as per approved vender list make. (fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage protection.

(ii) 15 to 24 Watts Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.95,

THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt, LED driver efficiency > 85% as per approved vender list

make (fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP2 (iv) 22-24 watts, Surge-2 KV Cat-lll

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D

4 mtr. Long duly painted with two coats of aluminium paint complete

with metallic base plate of 300 mm x 300 mm x 4mm thick for using as

a compound light pole with approx. weight 32 Kg 16.00 3225.94 Mtr

Providing Aluminium arm bracket of having 2 sets of suitable SS304

hardware for fixing the brackets & spread of 1.2 Mtr (Suitable for 89 to

114 mm pole top dia) (A) Single arm bracket 16.00 2234.12 No.

Supplying, erecting, commissioning and testing analog EPABX CMOS

microprocessor based system having common features With remote

programming & remote dialing having following other common

features. Auto Call Disconnector- (Incoming - Local- STD) with

programmable timing- External Call forward with DOSA- Walk in

Class of service & trunk reservation- Boss ring & call back on No Reply

last caller recall CLI- Hot Line with Delay & with No.- Unsupervised

Conference- Serial DISA ( DISA with option to dial another No. if

Extn. is No Reply)- Programming Flexibility of all features related to

timer( 41 Timer)-10 Different group of out going call restriction like

97, 98 etc.Having following capacity (B) 3 incoming junction line &

extensions. 1.00 7777.00 No.

Providing, erecting, testing & commissioning approved make oil

immersed ONAN cooled, double wound, core type indoor / outdoor

copper wound 11KV/ 433V step down transformer of following

capacities operating on 3 phase, 50 Hz 4 wire & neutral earthed system

continuously rated for a full temperature rise in oil not exceeding

Deg.C.at maximum ambient temp. of 50 Deg. C. complete with

necessary radiator first filling of new transformer oil & standard fitting

as below complying with IS 1180( Part 1 ):2014 standards with energy

efficiency level 1 Off load tap changing range steps +2.5% to -5% on

H.V for variation should be provided. The H.V. shall be connected

Delta & Secondary with star connection. The transformer should have

cable-end boxes on H.T. side suitable for up to 3 core 150 sq.mm.

XLPE cable & on L.T. side suitable for bus duct or cables as per

requirement complete with test certificates from manufacturers

1. Oil conservator with filling Hole & Cap - One No. 2. Thermometer

pocket with 6" dial type thermometer switch alarm & trip contacts-

Two nos. 3. Silica-gel breather with charge-One No. 4. Plain oil level

gauge - One No. 5. Drain / Sampling / Filter valve-One No.6. Top Filter

Valve -One No. 7. Explosion vent with Diaphragm -One No.8. Rating &

Diagram plate -One No. 9. Additional neutral bushing for earthing -

One No. 10. Bi directional Roller - Four Nos. 11. Earthing terminals -

Two Nos. 12. Lifting lugs - Two Nos 13. Air release plug. - One No.

Double float buchholz relay with Alarm and trip contacts 15. Control

cable as required from Transformer to VCB Panel is to be provided

with necessary connection to VCB relays for protection. as per IS

level-1 (a) 250 KVA Max. allowable loses at 50 % of rated load is

0.98 KW and at full load is 2.93 KW Cat.III 1.00 568635.05 No.

Supplying and erecting, commissioning and testing of Diesel Generating set

confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase,

415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water

cooled diesel engine with multi-cylinders developing suitable BHP not less

than following capacity at 1500 RPM with 10% overload for one hour in

hours with standard accessories like fly wheel, lubricating oil cooler, "A" class

governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler,

lubricating oil pressure gauge, end exhaust manifold, standard set of tools

with adjustable spanners, screw drivers, cylinder head to cover, joint cylinder

head to exhaust, element lube oil filter, 12 / 24 volts electric starting

equipment complete with standard heavy duty battery, dynamo, cut-outs,

ammeter, necessary wiring, pressure gauge, starter etc and heavy duty

Residential type exhaust silencer (With DEF System) and vertical hot air duct

both logged with asbestos rope, save oil trays, exhaust piping of required

length, standard wall/floor mounted fuel with level indicator and piping and

drip proof alternator, self excited, self regulated, screen protected, with

excitation system, capable of delivering the rated system output at 415 volts,

phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-

1968 with voltage regulation +/- 5% of rated voltage from no load to full

load. Both the engine and alternator fitted on a common fabricated steel base

plate with antivibration mounting engine and alternator both connected to

each other by flexible flange coupling and with floor/wall mounted control

panel box comprising of voltmeter ammeter, selector switches, ACB / MCCB

/ MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator & control panel shall

be connected with provided suitable capacity armoured cable and complete

with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound

absorbing material Rockwool of 64 density & 100 mm thick conforming to

IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded rockwool

covered from inside the canopy by perforated sheet with 3/4 mm holes, sound

level not more than 75 dB at a distance of 1 mtr, as per PVCT norms.DG set

should have in built fuel tank capacity of minimum 8 hrs of continous running

capacity on full load . Erection, commissioning and satisfactory testing as per

requirement with first filling of fuel (minimum up to the 80% of fuel tank

capacity), oil, etc. with guarantee / Warrantee of complete system for Two

years. & with obtaining all necessary certificate from Electrical Inspector. The

Capacity and Ratings of DG sets are as below. (As per new CPCB4+

Emission norms Engine With - Turbo Charger, EGR (Exhaust Gas

Recirculation), CRS (Common Rail Fuel System), DOC (Diesel Oxidation

Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring harness

connected to ECU (I) Continuous Rating of 62.5 KVA ,BHP not less than

Providing & Erecting approved make following size of TV Co-axial

flexible cable comprising inner conductor of solid bare copper insulated

with Foam PE & Secondary conductor made of poly - Aluminium film

bonded Al. Braids @ suitable coverage overall sheathed with black

PVC insulation. (e) RG-11 600.00 59.59 Mtr

Supplying & erecting approved make Telephone Cable electrolytic

copper conductor PE insulation twisted in two pairs, & wrapped with

FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket

suitable for telephone wiring & confirming to C-DOT erected in existing

pipe. of following size of conductors & nos.of pairs. With necessary

connections (a) Unarmoured (2) Two Pairs 603.60 19.19 Mtr

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge. (3)

Two Pin/RJ-11 Telephone Socket [A] For One Gang Cat.III

(4) TV Co-axial Socket outlet Cat.III 21.00 153.52 Nos

(8) Computer RJ-45 socket Cat.III 10.00 153.52 Nos

(a) General Features & Special Features of the all lift items shall be

taken as below.(b) for Handicap Lifts, Minimum 10 Passengers Lift

Capacity shall be considered.same is to be informed to architect /civil

authority to keep necessary size of lift well. (c) The lifts of 15/ 16 and

above passenger capacity shall be taken for Hospital Lifts; Where in

Description “ Stretcher Lifts” shall be mentioned. (d) The Rates of the

following items are for the lift of Machine room less. For Machine room

Lifts, rate for Rs. 1,50,000/- shall be deducted in Total Cost for the Lifts

from 4 to 13 Passenger Lift. Rs. 2,00,000/- shall be deducted in Total

Cost for the Lifts 15 and above passenger capacity as extra cost. (e)

Add Rs. 80,000/- for the DUPLEX control for the lifts up to 10 floors

and add Rs. 10,000/- for additional each floor above 10 floors.

(A) GENERAL DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque

Lift 3 phase 440 V A. C. Permanent Magnet Synchronous motor of

proper rating with high efficiency shall be used.[2] Micro processor

based / PLC, ACVVVF, vector control drive with encoder feedback

closed loop system shall be used for lift car and door operation which

shall be full collective selective operation hall call demand response,

UP/DOWN hall stops, Main, Up/ Down Contactor with overload and

phase reversal relay and safety controls.[3] Car with M S platform with

bracings of adequate size and to sustain the impact load cabin +

passenger with safety factor of fire for steel and side panels of

Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S.

finishes with aesthetic appearance with LED ceiling lights. Car flooring

shall be of anti skid PVC with choice of colour of engineer in charge.

Car doors shall be of stainless steel grade 304, hairline finish with

centre opening / telescopic automatic doors. Car panel will also be S.S.

304 finished with emergency stop device, mechanical door safety

device, facility of auto/ attended mode. All car panel buttons and all

floor switches must be with brail language as per lift act. [4] All landing

doors must be fire rated for 2 hour shall be fully automatic centre

opening/ telescopic opening made of hairline finish steel grade of

with key holes and infrared curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car along with

alarm switch shall be provided. Also, Emergency Light & Fan should

start immediately without any Time Delay as soon as power fails.[6]

Digital scrolling indicator system for up-down arrow along with floor

position indicator shall be provided inside the car and at all floors.[7]

Full height infra red curtain with multiple cross / crossing light beams

shall be provided.[8] Automatic Rescue Device (ARD) shall be provided

accordingly of passenger capacity with Manual Rescue Operation (

Manual Cranking Facility). [9] Audio visual indication in the lift car

showing over loading shall be provided such that doors kept open till

[10] load buffers/PU

Spring is removed Buffers shall be provided.[11] Car fan as per

passenger capacity with automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters

shall be provided in control panel.[14] Mechanical over speed governor

with governor calibration as per actual site parameters and submission

of calibration certificate submission, door key holes in the floor doors,

fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and

monkey ladder for lift pit should be provided by the lift agency, along

with the other steel structure works, foundations for the machine etc

[16] In the hoist way fascia plate shall be provided without any extra

cost, where ever required as / if directed by engineer in charge.[17]

Permanent wiring with necessary safety devices like RCCB in all

circuit, Over Voltage Under Voltage protection and THD eliminator in

circuit for lift machine room and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug points shall be provided by

the agency. Only 3 phase Power Supply shall be made available by

department in lift machine room. Necessary Earthing as per Lift

Act/Rules shall be arranged by Lift Agency.[18] Any civil/ electrical

works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra

cost. (granite/marble fixing around all landing door openings are not in

lift agency’s scope.) [19] Agency has to provide all working drawings

and documents and liaison services for obtaining all necessary

permission from lift inspector and other authorities. [20] acrylic

transparent licence/display A4 size holder in lift car [20A] As per

statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift

agency has to provide 1. Car top safety barricade

2. Push & talk communication system.3. Fireman's switch operation at

Ground Floor. 4.carrying out third party lift inspection during/after lift

erection and provide report by third party authorized by concern

licensing authority 5.agency has to provide third party insurance upto

completion of free maintenance period and submit the document for

the same. [21] Car Panel Operating Buttons with floor position

indicator/buttons must be of Auto Glow type clearly visible when view

from inside cabin. [22] For Physically Handicapped person Full Length

Handrails of hairline finish steel grade of 304 should be provided at

appropriate height on the Rear & Side Wall Panels in Lift Car.

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM

category 1. Advanced control system dual 64 bit embedded

microprocessor with CANBUS Serial Communication mode including

Regenerative power efficient operation,on site programming facility,

Anti nuisance, Pte-opening, BMS/RMS with necessary online real time

monitoring system having necessary connectivity for remote monitoring

& other suitable supporting hardware & software devices to fulfil the

purpose. 2. Floor Indication LCD Display with call registration & brail

mark with arrival gong and hall lantern & TFT Screen in the car with

MP3 Voice Announcer.3. CAR Panel should be Scratch resistive SS

Moonrock finish / Hair Line / Honeycomb for car and all Doors, All

landing doors must have fire rating up to 2 hours and car door must

have multi-level crisscross beam door protection.4. To & fro

communication system & wiring (i.e. car , control room & guard room )

and Each elevator are equipped with remote monitoring system.agency

has to provide mobile app and user id and password for monitoring

Supplying, Erecting, Testing & Commissioning the passenger /

stretcher lift having following main features: 4/5/6 Passengers, Ground

plus 1 upper floor with Rated Speed of 1.0 m/sec,

(C) With General PLUS ADDITIONAL SPECIAL FEATURES

attached herewith. (Prem. Cat.) Fire Station 1.00 1147046.90 Ea

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Rajpipla Nagarpalika

Amreli Rajpipla

Chief Officer President

Rajpipla Nagarpalika Rajpipla Nagarpalika

Rajpipla Rajpipla