Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.1 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹35.9 L+₹76,390 (2.18%)Rejected-Finance | L2 | Rejected-Finance Not Being lowest bidder | |
| 3 | L3₹37.4 L+₹2.3 L (6.61%)Rejected-Finance B S ROAD KOLIBARI TEZPUR 784 001 DIST SONITPUR ASSAM | SONITPUR | ASSAM | 784001 | L3 | Rejected-Finance Not being lowest bidder | |
| 4 | Rejected-Technical MAHABHAIRAB PO TEZPUR DISTT SONITPUR ASSAM PIN 784 001 | SONITPUR | ASSAM | 784001 | - | Rejected-Technical No remarks as per Ser No 475 of WLR of QE Dec 2025 of HQ CEEC |
| Sl No | Description | Qty | Unit | Anil Kumar Sarmah L3 | SHANTI ELECTRIC WORKS L2 | M/S Manjit Singh L1 |
|---|---|---|---|---|---|---|
| 1.00 | Material and labour to lifting and lowering to submersible pump motor set capacity of motor 7.5 HP to 12.5 HP with column pipe and submersible cable including disconnecting electric connection carefully from panel board, old heavy duty flanged column pipe in 100/80 mm dia, minimum length 30mtrs to as site in 3mtrs pieces, bolts nuts washers, rubber gasket etc with supply and fixing new nutt, bolts, washer, rubber gasket in suitable to 100 mm flange joints etc with all other necessary site required work for making functional to submersible pump motor set of following capacity complete all as specified and directed
Note:- Quoted rate shall deemed to be included cost of
(i) Length of column pipe of required size and quantity of nut, bolts, washers and gasket.
(ii) Required tools and plants shall be arrange by contractor.
(iii) Repair of motor/pump/submersible cable shall be measured and paid under relevant item of schedule. | 11 | Each Job | 6,500 ₹71,500 Lowest | 7,000 ₹77,000 | 8,000 ₹88,000 |
| 2.00 | All as per item No 1 here-in-before but capacity of motor 15HP to 25 HP.complete all as specified and as directed. | 14 | Each Job | 7,500 ₹1,05,000 Lowest | 8,000 ₹1,12,000 | 9,000 ₹1,26,000 |
| 3.00 | Labour for de-coupling, dismantling the submerseable motor capacity of motor 1 to 5 HP 3 Ph, 415 Volt body carefully as GM/Brass impeller, neck ring, bowl assebly, bushes, coupling, lock, sand cap, CI intermediate bowl, S/S pump shaft etc, checking and segregating serviceability, for replacing of defected parts, cleaning thoroughly by approved method of heating, drying, varnishing to winding using good quality of insulating materials, re-assembling testing and commissioning after replacing defected spaires etc complete all as specified and directed Note :- (i) Replaced spaire parts will be paid separately under relevant item of schedule. (ii) Quoted rate shall be included the cost of re-assembling, marking SM, MES or srl No etc (iii) Transport charges to workshop and return back to site (iii) Repair,servicing, checking, machine work what ever is reqd cutting,grinding, polishing etc other all related site required work. | 6 | Each Job | 2,900 ₹17,400 Lowest | 3,000 ₹18,000 | 4,000 ₹24,000 |
| 4.00 | All as per item No 3 here-in-before but capacity of motor 7.5 to 12.5 HP 3 Ph, 415 Volt..complete all as specified and as directed. | 11 | Each Job | 3,900 ₹42,900 Lowest | 4,000 ₹44,000 | 5,000 ₹55,000 |
| 5.00 | All as per item No 3 here-in-before but capacity of motor 15 to 25 HP, 3 Ph, 415 Volt ..complete all as specified and as directed. | 14 | Each Job | 4,900 ₹68,600 Lowest | 5,000 ₹70,000 | 5,500 ₹77,000 |
| 6.00 | M&L for cutting and removing the burnt windings from the Submersible motor capacity of motor 1 to 5 HP 3 Ph, 415 Volt body ,supply and rewinding the same above items using existing size /gauge/ qty of insulated supperior quality water proof copper winding wire of suitable size/gauge and nos of turns using insulating materials and submersible copper cable in suitable size required Lenght outside minimum 1.5 Mtrs, re-assembling ,full load testing, heating, drying , varnishing, overhauling,re-installation, commissioning, testing and connecting up complete all as existed following capacity all as directed.
Note:- (i) Necessary testing shall be done by contractor after lowering in borewell at site. (ii) Quoted rate are included cost of cutting, removing, welding of motor body for making functional of pump set. | 6 | Each Job | 7,850 ₹47,100 Lowest | 8,000 ₹48,000 | 9,000 ₹54,000 |
| 7.00 | All as per item No 6 here-in-before but capacity of motor 7.5 to 12.5 HP, 3 Ph, 415 Volt ..complete all as specified and as directed. | 10 | Each Job | 13,500 ₹1,35,000 Lowest | 14,000 ₹1,40,000 | 15,000 ₹1,50,000 |
| 8.00 | All as per item No 6 here-in-before but capacity of motor 15 to 20 HP, 3 Ph, 415 Volt..complete all as specified and as directed. | 8 | Each Job | 20,500 ₹1,64,000 Lowest | 21,000 ₹1,68,000 | 21,000 ₹1,68,000 |
| 9.00 | All as per item No 6 here-in-before but capacity of motor 22.5 to 25 HP, 3 Ph, 415 Volt..complete all as specified and as directed. | 5 | Each Job | 23,500 ₹1,17,500 Lowest | 24,000 ₹1,20,000 | 24,000 ₹1,20,000 |
| 10.00 | Supply and fix in replacement Butterfly valve size of 150mm dia bore ISI marked with GM flap and seat complete flanged at both ends including jointing and jointing material such as bolts nuts, washers, rubber gasket complete including dismantling and removing/taking out old unserviceable complete all as specified and directed. | 4 | Each | 9,500 ₹38,000 Lowest | 10,000 ₹40,000 | 10,000 ₹40,000 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
4 Jun 2026, 6:00 pmClosed
GE South Tezpur
GE South Tezpur Mission Chariali
REPAIR/MAINTENANCE OF CENTRIFUGAL SUBMERSIBLE, MONO BLOCK PUMP AND MOTOR STARTER/PANEL AND ALLIED WORK UNDER GE (S) TEZPUR
2026_MES_765188_1
9149
Open Tender
Civil Works
Item Rate
210 days
GE South Tezpur
as per NIT
4 documents required · 4 mandatory
₹500
GE South Tezpur
₹70,000
Yes
20 Aug 2026
13 May 2026
8 Jun 2026
13 May 2026
4 Jun 2026
28 May 2026
13 May 2026 - 20 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Material and labour to lifting and lowering to submersible pump motor set capacity of motor 7.5 HP to 12.5 HP with column pipe and submersible cable including disconnecting electric connection carefully from panel board, old heavy duty flanged column pipe in 100/80 mm dia, minimum length 30mtrs to as site in 3mtrs pieces, bolts nuts washers, rubber gasket etc with supply and fixing new nutt, bolts, washer, rubber gasket in suitable to 100 mm flange joints etc with all other necessary site required work for making functional to submersible pump motor set of following capacity complete all as specified and directed
Note:- Quoted rate shall deemed to be included cost of
(i) Length of column pipe of required size and quantity of nut, bolts, washers and gasket.
(ii) Required tools and plants shall be arrange by contractor.
(iii) Repair of motor/pump/submersible cable shall be measured and paid under relevant item of schedule. | 11 | Each Job | - | - |
| 2 | All as per item No 1 here-in-before but capacity of motor 15HP to 25 HP.complete all as specified and as directed. | 14 | Each Job | - | - |
| 3 | Labour for de-coupling, dismantling the submerseable motor capacity of motor 1 to 5 HP 3 Ph, 415 Volt body carefully as GM/Brass impeller, neck ring, bowl assebly, bushes, coupling, lock, sand cap, CI intermediate bowl, S/S pump shaft etc, checking and segregating serviceability, for replacing of defected parts, cleaning thoroughly by approved method of heating, drying, varnishing to winding using good quality of insulating materials, re-assembling testing and commissioning after replacing defected spaires etc complete all as specified and directed Note :- (i) Replaced spaire parts will be paid separately under relevant item of schedule. (ii) Quoted rate shall be included the cost of re-assembling, marking SM, MES or srl No etc (iii) Transport charges to workshop and return back to site (iii) Repair,servicing, checking, machine work what ever is reqd cutting,grinding, polishing etc other all related site required work. | 6 | Each Job | - | - |
| 4 | All as per item No 3 here-in-before but capacity of motor 7.5 to 12.5 HP 3 Ph, 415 Volt..complete all as specified and as directed. | 11 | Each Job | - | - |
| 5 | All as per item No 3 here-in-before but capacity of motor 15 to 25 HP, 3 Ph, 415 Volt ..complete all as specified and as directed. | 14 | Each Job | - | - |
| 6 | M&L for cutting and removing the burnt windings from the Submersible motor capacity of motor 1 to 5 HP 3 Ph, 415 Volt body ,supply and rewinding the same above items using existing size /gauge/ qty of insulated supperior quality water proof copper winding wire of suitable size/gauge and nos of turns using insulating materials and submersible copper cable in suitable size required Lenght outside minimum 1.5 Mtrs, re-assembling ,full load testing, heating, drying , varnishing, overhauling,re-installation, commissioning, testing and connecting up complete all as existed following capacity all as directed.
Note:- (i) Necessary testing shall be done by contractor after lowering in borewell at site. (ii) Quoted rate are included cost of cutting, removing, welding of motor body for making functional of pump set. | 6 | Each Job | - | - |
| 7 | All as per item No 6 here-in-before but capacity of motor 7.5 to 12.5 HP, 3 Ph, 415 Volt ..complete all as specified and as directed. | 10 | Each Job | - | - |
| 8 | All as per item No 6 here-in-before but capacity of motor 15 to 20 HP, 3 Ph, 415 Volt..complete all as specified and as directed. | 8 | Each Job | - | - |
| 9 | All as per item No 6 here-in-before but capacity of motor 22.5 to 25 HP, 3 Ph, 415 Volt..complete all as specified and as directed. | 5 | Each Job | - | - |
| 10 | Supply and fix in replacement Butterfly valve size of 150mm dia bore ISI marked with GM flap and seat complete flanged at both ends including jointing and jointing material such as bolts nuts, washers, rubber gasket complete including dismantling and removing/taking out old unserviceable complete all as specified and directed. | 4 | Each | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
Tenderdocus.pdf
Tender Documents • 1.39 MB
Addldocus.pdf
Additional Documents • 0.16 MB
BOQ_857014.xls
BOQ • 1.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .