GE/K-48/2025-26

Amount

Dismantling of plain corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed by the Engg-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by the Engg-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by the Engg-in-Charge.

Demolition of Cement Concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed by the Engg-in-Charge.

M&L for 50mm thick PCC type C-2 1:3:6 (20 mm graded aggregate) as in sub base of floors or similar works complete all as specified and directed by the Engg-in-Charge.

M&L for hardcore of gauage n exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by the Engg-in-Charge.

M&L for PCC type C-2 (1:3:6), 75 mm thick as in plinth protection/ sub base or similar works complete all as specified and directed by the Engg-in-Charge.

M&L for coloured chequered cement concrete tiles 300x300x25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed in CM (1:4) complete all as specified and directed by the Engg-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by the Engg-in-Charge.

M&L for machine cut Kota stone slab flooring 20-25mm thick, over cement screed bed or bedding layer of cement mortar 20 mm thick in CM for laying floor finishes base laid and jointed with grey cement slurry mixed pigment to match the shade of the slab including rubbing and mirror polishing/ preparation complete all as specified and as directed by Engr-in-Charge.

M&L for 18 to 20mm thick granite work (table rubbed and polished) as in shelves, counter slabs & skirting etc over and including 15mm thick screed/ rendering in CM (1:4) and pointing with white cement (mixed with suitable colour) (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding edges of granite complete all as specified and directed by the Engg-in-Charge.

Demolition of Cement Concrete (reinforced) of any description and in any position complete all as specified and as directed.

M&L for RCC (nominal mix) 1:2:4, type B1 using 20mm graded agg as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies,deck slabs and in shelves and the like complete all as specified and directed by the Engg-in-Charge.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by the Engg-in-Charge.

M&L for Fromwork to sides and soffits of floor or roof beams, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc fair finished surfaces of concrete complete all as specified and directed by the Engg-in-Charge.

Demoliton of precast concrete articles and precast concrete block walling including all quoins, arches, pillars, etc built in cement mortar of any description not other specifically provided for etc complete all as specified.

M&L for precast cement concrete type C1 (1:3:6) (using 20mm graded crushed stone agg) block masonary with solid blocks exc 10 cm in width and setting in CM 1:4, complete all as specified and directed by Engr-in-Charge.

Dismantiling of floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specifed.

M&L for coloured glazed ceramic tiles in vertical surfaces 450mmx 300mmx7mm to 8mm thick Set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 15mm thick rendering in CM 1:4 complete all as specified and directed by the Engg-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/blankets, any thickness, including cover fillets complete all as specified and directed by the Engg-in-Charge.

S&F 11 to 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails on wall to timber frame work complete all as specified and directed by the Engg-in-Charge.

S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails on ceiling to timber frame work complete, all as specified and directed

Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in framed work, in any position complete all as specified and directed by the Engg-in-Charge.

M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or beads complete all as specified and directed by the Engg-in-Charge.

M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm in square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed.

M&L for Plain fillets of second class soft wood (KAIL), sectional area not exceeding 3 Sqcm in square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4.0 Sqm with shutters (without taking off shutters from the frames) each complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 Sqm with shutters (without taking off shutters from the frames) each complete all as specified and directed.

S&F 2nd class soft wood plain, solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.

S&F 30 mm thick 2nd class soft wood (KAIL) plain framed panelled shutter (any number of panels) with panels of timber flat on both sides (Feather edge) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat.

S&F 30 mm 2nd class softwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed by the Engg-in-Charge.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified and directed by the Engg-in-Charge.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames metal frames or stone,concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by the Engg-in-Charge.

S&F 3mm thick glass pan ordinary quality and glazing fixed with oil putty or bedding in square n exc 0.5 Sqm in each pane complete all as specified and directed by the Engg-in-Charge.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by the Engg-in-Charge.

S&F 150mm long Aluminium anodisedl barrel tower bolt of extruded section and fixed complete all as specified and directed by the Engg-in-Charge.

S&F 75mm mild steel butt hinges medium weight, cold rolled fixed with screws or welded complete all as specified and as directed by Engr-in-Charge

S&F 100mm mild steel butt hinges medium weight , cold rolled fixed with screws or welded complete all as specified and as directed by Engr-in-Charge

S&F 100mm extruded aluminium alloy handles febricated type anodised fixed with screws complete all as specified and as directed by Engr-in-Charge

S&F 125mm extruded aluminium alloy handles fabricated type anodised fixed with screws complete all as specified and as directed by Engr-in-Charge

S&F 300mm Aluminium alloy, anodised,sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge

S&F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed with screws complete all as specified and as directed by Engr-in-Charge

M&L for preparation of new surface of wood and wood based material surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge

M&L for preparing old steel surfaces of any description over 10cm width/girth and applying one coats of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge

Taking up or down 20 mm dia steel tubing/PPR connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engr-in-Charge

M&L for 20 mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed by Engr-in-Charge

S&F in repair fancy type chromium plated cast copper alloy bib taps long shank & cup of 20 mm dia bore complete all as specified and as directed by Engr-in-Charge

S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915 mm X 460 mm & bowl size 410 mm X 330 mm X 160 mm including sink coupling and waste pipe complete all as specified and as directed by Engr-in-Charge

Dismantling PVC water tanks of capacity exc 500 ltr but n exc 1000 ltr and removing to store complete all as specified and directed.

S&F 1000 ltr capacity rotationally moulded polythene water storage tanks (cylindrical vertical with closed top) multilayers of approved make hoisted & fixed at position complete all as specified and as directed by Engr-in-Charge

S&F in repair 20 dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed by Engr-in-Charge

Taking down cement plaster form brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed by Engr-in-Charge

M&L rendering 15mm thick cement plaster in cement mortar (1:4) finished even & fair without using extra cement on brick/concrete surfaces complete all as specified and as directed by Engr-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-Charge

S&F Rolled mild steel Gde Fe-290 (Gde Fe 165) as in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

S&F in repair Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat ections) including distance pieces, cleats etc complete all as specified and as directed by Engr-in-Charge.

M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & fair without using extra cement on brick/concrete surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for two coats of cement based paint on newly plastered surfaces of walls over a coat of primer including preparation of surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces on walls and applying two coats of OBD over a coat of 1mm thick putty complete all as specified & directed.

Excavation in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in Hard/ dense soil complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone agg as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

S&F precast (Factory Made) RCC (1:2:4) using 20mm graded agg boundry pillars with Ht 1800 mm & size (150mm x150 mm) with vertical steel of 10 mm dia 04 Nos & stirrups 08 mm dia at distance of 150 mm c/c and base pillar of size 450mm x 150mm x thickness (150mm) with 4 nos 10mm dia rod both ways complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc complete all as specified and directed by Engr-in-Charge.

M&L for Point wiring for light/fan/bell with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate,flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed. (a) For one light point or bell/buzzer point controlled by one switch.

All as per Srl item No. 65.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board complete all as specified and directed by Engr-in-Charge.

All as per Srl item No. 65.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Switch piano flush type 5 Amps, single pole one way complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type complete all as specified and directed by Engr-in-Charge.

S&F in replacement of in Ceiling rose on PVC Square Block surface bakelite 65x50mm, two to three terminals complete all as specified and directed by Engr-in-Charge.

S&F in replacement of LED white colour 1x18 Watt, 220 V, AC decorative ultra slim suqure profile LED lighting fixture with extruded polycarbonate enviromental friendly energy efficient ready to use, connecting up with two/three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by the Engr-in-Charge.

S&F in replacement of Lamp holder, PVC/Polycarbonate type on square block with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

S&F in replacement of LED bulb 09 watt, 230 volts complete all as specified and directed by Engr-in-Charge.

S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 08 way with 200 Amp rated bus bar including blanking plates where required complete all as specified and directed.

S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 12 way with 200 Amp rated bus bar including blanking plates where required complete all as specified and directed by Engr-in-Charge.

S&F in replacement 240V, 10 KA, C curve MCB SPN 40 to 63 Amp in the MCB DB incl connection testing and commissioning complete all as specified and directed by Engr-in-Charge.

S&F in replacement 240V, 10 KA, C curve MCB SP 5 to 32 Amp in the MCB DB incl connection testing and commissioning complete all as specified and directed by Engr-in-Charge.

S&F in replacement LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up three core flexible copper conductor cable of suitable size.

S&F in replacement of LED Flood light fitting 70 watt 5000 k green/natural white, IP>66 ,grey powder coated die cast aluminium housing, inbuilt energy efficent surge protected electronic driver, with all connected accessories complete all as specified and directed by Engr-in-Charge.

S&F in replacement exhaust fan, steel body, AC single phase, 230 V of size 380 mm sweep with blades and frame and louvers complete with cutting of suitable size of hole on wall with all connected accessories and making surface good after fixing complete all as specified and directed by Engr-in-Charge.

M&L for submain wiring comprising single core, 2 Runs of 6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including min 25 mm dia PVC Conduit ISI Marked(heavy duty) and its fittings on surface/recessed complete including provision of 1X6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS complete all as specified and directed by Engr-in-Charge. (Note:- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed to be included in quoted rates)

S&F in replcement 1100 volts grade heavy duty 16 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended with suitable size of PVC conduit and saddle for whole length to fix on wall/surface complete all as specified and directed by Engr-in-Charge.

M&L in replacement for Earthing complete with galvanised steel earth plate electrode of size 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and including GI iron wire of size 4 mm dia by means of GI bolts, nuts, check nuts and washers, protected by 15mm bore GI light grade ISI marked pipe upto and including test points. Earth plate shall be surrounded by alternate layer 15cm thick of charcoal or coke and common salt all around bottom and top, 20mm bore GI medium grade ISI marked pipe for watering and including funnel,wire mesh,PCC chamber pit made with PCC(1:3:6) type C-1(using 20mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50M, CI pit cover duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No.3 of SSR 2009(Part-I) complete all as specified and directed by Engr-in-Charge.. Note :- (i) Protection pipe and earthing strip upto test point from top of the earth plate and further upto the body of electrical equipment shall be included in the unit rate of this item. (ii) Earth testing arrangement should be done by contractor as per direction of Engr-in-Charge.

S&F in replacement exhaust fan, steel body, AC single phase, 230 V of size 300 mm sweep with blades and frame and louvers complete with cutting of suitable size of hole on wall with all connected accessories and making surface good after fixing complete all as specified and directed by Engr-in-Charge.

Note : Deduction for amount of Rs.1,57,271.60 as listed in Schedule 'A' Part-II (Schedule of Credit) shall be made while awarding of contract.

M/S Haji Hadi (BID ID -3372092)

M/S UNIVERSAL ENGINEERS (BID ID -3372258)

M/S LIAQAT ALI KHAN (BID ID -3372161)

M/S SK TRADERS (BID ID -3371979)

M/S MOHD FAROOQ (BID ID -3371141)

M/S MOHD KHAN (BID ID -3372100)

M/S M A ENTERPRISES (BID ID -3372234)