Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.6 LAccepted-AOC 18 MOTI BAGH BABYAL ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC ACCEPTED LOWEST BIDDER L1 | |
| 2 | L2₹24.6 L+₹74,586.50 (3.13%)Rejected-Finance SHOP NO 5 OPP SHANI MANDIR PROFESSOR COLONY DISTT YAMUNA NAGAR HARYANA 135001 | YAMUNANAGAR | HARYANA | 135001 | L2 | Rejected-Finance Being rejected L2 | |
| 3 | L3₹26.7 L+₹2.8 L (11.9%)Rejected-Finance | L3 | Rejected-Finance Being rejected L3 | |
| 4 | L4₹27.0 L+₹3.2 L (13.2%)Rejected-Finance | L4 | Rejected-Finance Being rejected L4 | |
| 5 | L5₹29.0 L+₹5.1 L (21.5%)Rejected-Finance H 45 MAHESH NAGAR AMBALA CANTT 133001 HARYANA | AMBALA | HARYANA | 133001 | L5 | Rejected-Finance Being rejected L5 |
Tender Value
₹37.6 L
EMD Value
₹75,232
Closing Date
1 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI ABHINANDAN KUMAR MISHRA EE IDSE
GE (SOUTH) AMBALA CANTT
CA NO GE SOUTH AMB 66 2023 2024 CERTAIN BR AND EM SANCTIONED WORKS OF AGE BR II (SOUTH) UNDER GE (SOUTH) AMBALA CANTT
2024_MES_635569_1
GE(SOUTH)/AMB-66/2023-2024
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) AMBALA CANTT
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (SOUTH) AMBALA CANTT
₹75,232
Yes
30 Mar 2024
3 Jan 2024
3 Feb 2024
3 Jan 2024
1 Feb 2024
19 Jan 2024
3 Jan 2024 - 16 Jan 2024
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debries out side defence area complete all as specified and directed.
Material and labour for premium quality, joint free, non skid coloured ceramic tiles (of approved class, colour and design/shade), area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floors etc, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.
Material and labour for premium quality, joint free, non skid coloured ceramic tiles (of approved class, colour and design/shade), area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including rendering 10mm thick in cement plaster 1:3 finished rough surface to receive tiles complete all as specified and directed.
Material and labour for premium quality, joint free, non skid coloured ceramic tiles (of approved class, colour and design/shade), area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, 8 to 9 mm thick as in floors etc, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.
Material & labour for premium quality coloured glazed ceramic tiles (of approved class, colour and design/shade) of size 300x 450x 7 to 8mm thick as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including rendering 10mm thick in cement plaster 1:3 finished rough surface to receive tiles complete all as specified and directed.
Material and labour for premium quality, light shade vitrified ceramic tiles 8 to 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed as in neat, neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) complete all as specified and directed.
Material and labour for premium quality, light shade vitrified ceramic tiles 8 to 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and directed.
Material and labour for machine cut kota stone slab 18-20 mm thick for staircase steps in single piece, over and including cement screed bed 15 mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete including provn of two Nos 3x3mm grooves at tread of each step complete all as specified and directed.
Material and labour for machine cut kota stone slab 18-20 mm thick on vertical surfaces like riser of steps, skirting in single piece, over and including cement screed bed 10 mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete all as specified and directed.
Material and labour for 18 to 20mm thick granite stone of any colour (of any type) work (table rubbed, polished & moulding), as in floors, cooking platforms and like bedded with and including 15 mm thick screed bed in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding to edges of stone slabs one edge etc complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc complete all as specified and directed.
Material and labour for brick work with sub class 'B' (old size) bricks, straight or curved on plan, exceeding 6 mtr mean radius built in CM 1:4 complete all as specified and directed.
Material and labour for brick work with sub class 'B' (old size) bricks, straight or curved on plan, exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.
Material and labour for brick work with sub class B bricks of old size, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to faciliate demolition) as in existing RCC tanks etc complete all as specified and directed.
Material and labour for providing reinforced cement concrete 1:2:4 type B1 (using 20mm graded mechanically crushed stone aggregate) as in chajjas, fascia and the like etc complete all as specified and directed.
Material and labour for use & waste for formwork to chullah hoods, chajja’s, troughs and similar items including edges of fair finished surface of concrete complete all as specified and directed.
Material and labour for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required superficial area not exceeding 150 sq.cm complete all as specified and directed.
Material and labour for cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified and directed.
Material and labour for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work in cement mortar 1:6, also facing, jointing and pointing to match existing work, complete complete all as specified and directed.
Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed.
Material and labour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day. NOTE : - Further treatment over the surface so achieved will be carried out only after approved of the same by GE.
Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 15mm thick rendering in cement mortar (1:4) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rough cast plaster with and including 15mm thick rendering in CM 1:3 on brick wall or concrete surface as specified in clause 14.22 of SSR Part-I complete all as specified and directed. NOTES: - (i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly loose/wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. (iii) Contractor's quoted rate shall include all above provisions and no extra shall be admissible on this account.
Material and labour for 5mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement with and including applying two coats of oil bound distemper over a coat of primer applying with roller on ceilig complete all as specified and directed.
Material and labour for 10mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement with and including applying three coats of white wash on ceiling complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer on walls complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer over a coat of wall care putty not less than 1mm thick as per manufacturer's instruction complete all as specified and directed.
Material and labour for preparation of new plastered surface of two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over a coat of wall care putty not less than 1mm thick as per manufacture instructions, complete all as specified and directed.
Material and labour for complete removal of existing treatment on surface of ceilings by using appropriate technique as approved by Engineer-in-Charge for complete removal of all layers of treatment and reaching upto old plastered surface and applying a coat of wall care putty not less than 1mm thick as per manufacture instructions and applying two coats of oil emulsion paint over a coat of alkaline resistant primer complete all as specified and directed.
Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. (NOTE: - The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).
Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre but not exceeding 4 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. (NOTE: - The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).
Supply and fixing of pressed steel frames for doors of size 125 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 3 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and directed.
Supply and fixing of pressed steel frames for doors of size 105 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 3 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and directed.
Material and labour 2nd class hardwood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) supplt and fixed to chowkats complete all as specified and directed.
Supply and fixing of factory made flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and as directed
Supply and fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified and directed.
Supply and fixing of factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site with 03 Nos extruded aluminium alloy butt hinges 100mm, 02 Nos aluminium tower bolt 150 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed
Supply and fixing mild steel butt hinges of 100mm length, cold rolled, medium weight, ISI marked complete all as specified.
Supply and fixing of extruded aluminium alloy handles, fabricated type, anodized of size 150 mm long complete all as specified and directed.
Supply and fixing of aluminum anodized, barrel tower bolts of extruded section 200mm long complete all as specified and directed.
Supply and fixing of 300 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and as directed.
Supply and fixing in repair of mild steel helical door spring 150 mm long fixed with screws to wooden chowkhats or welding to steel chowkhats complete all as specified and directed.
Material and labour for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Supply and fixing of steel window box type, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skelton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable including PCC (C-O ,1:3:6 using 12.5 graded stone aggregate) bed blocks for hold fasts, complete all as specified and directed. NOTE : - (i) For the purpose of measurement & payment double shutter both glazed and gauzed with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings and one shop coat of zinc chromate primer . The pattern of grill shall be all as shown on drawing. (iii) Glazing, wire mesh and painting shall be measured and paid for separately.
Supply and fixing of factory made steel window/ventilator fixed type including necessary mild steel acessories etc. with glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified and directed.
Supply and fixing of sheet glass 4mm thick, ordinary quality , in square not exceeding 0.5 Square metre each pane and glazing with oil putty & spring glazing clips to steel windows etc complete all as specified and as directed.
Supply and fixed of 4 mm thick figured glass, pin head type and glazing with oil putty & spring glazing clips in squares not exceeding 0.5 Sqm in each pane and glazing with oil putty to steel windows, complete all as specified and as directed.
Supply and fixing of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed.
Supply and fixing of rubber strips 3 to 4mm thick & 65mm to 75mm wide fixed on bottom rail of door for covering gaps between door and floor to aviod entry of insects, dust etc complete all as specified and as directed.
Supply and fixing in repair of stainless steel curtain rod 25 mm dia having wall thickness 1.60mm fixed with and including stainless steel decorative brakets/wall to wall sockets, two latto for each rod lenth at both end etc., complete all as specified and directed.
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed.
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed.
Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required, complete all as specified and as directed.
Supply and fixing of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls or laid in floors/roofs etc including necassary cutting/chasing/pinning in wall if required and making good the disturbed surfaces as per existing wherever required, complete all as specified and as directed.
Supply & fixing of 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed.
Supply and fixing in repair of stop valve 20mm dia, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and as directed.
Supply and fixing in repair of bib taps, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.
Supply and fixing in repair of chromium plated bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed.
Supply and fixing in repair of fancy type chromium plated wall mixer (Hot & old), cast copper alloy, with capstan heads, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed.
Supply and fixed in repair of vitreous china wash down water closet pedestal pattern (EWC), White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified and directed.
Supply and fixing in repair of 10 litre capacity virgin polypropylene cistern, white at low level complete with 32 mm bore PVC flush pipe of suitable length, PVC connection 450 mm long having PTMT nuts including bracket and making all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed.
Supply and fixing in repair of vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, PVC connection 450 mm long having PTMT nuts and 32 mm dia brass chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified and directed.
Material and labour for 40mm bore low density polythelene pipe (LDPE) of pressure rating 6Kgf/Sqcm complete fixed to walls, ceiling or laid in floors etc fixed in repair complete all as specified and directed
Supply & fixing in repair of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brakects guard and railing 60cm long complete all as specified and directed.
Supply and fixing of sheet glass corner assembly consisting of 5.5mm thick sheet glass shelf 300mmx300 mm with chromium plated bracket guard and railing complete fixed in repair complete all as specified and directed.
Supply and fixed in repair of chromium plated brass towel rail 20 mm dia & 600 mm long including a pair of CP brackets fixed with plastic rawl plugs & CP screws fixed in repair complete all as specified and directed.
Supply and fixed in repair of soap dish, any type, fixed to plugs with chromium plate brass screws complete as specified and directed.
Supply and fixing in repair chromium plated hand shower (Health faucet) including 1.50 meter long flexible tube. complete all as specified and as directed
Supply and fixing in repair of PVC coloured bathroom cabinet overall size 500 x 400 mm decorative design with looking mirror, nepkin rail complete all as specified and as directed
Supply and fixing in repair of fancy type, shower rose 125mm size with swivel joints, brass chromium plated, revolving type, fixed to existing steel pipe or union 15mm bore complete all as specified and directed.
Supply and fixing in repair of stainless steel grating openable 100mm dia with or without hole including fixing with white cement complete all as specified and directed.
Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. NOTE : - Tank shall be white and make of tank shall be engraved on the tank.
Cleaning and removing all scale and dirt, etc from existing water storage tanks of capacity exceeding 250 litres and not exceeding 500 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank including cleaning from mouths of circulating pipes, to entire satisfaction of Engr-in–charge of cleaning, including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm high complete all as specified and directed. (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE: - (i) The whole process of disconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it.
Supply and fixing of LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) of both side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen /bed rooms cabinet sides top, bottom and shelves inside the cabinet complete as per manufacturer’s specifications complete including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed.
Supply and fixing of LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) of single side rigid lamination of approved colour and other side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed.
Supply and fixing of 12mm thick LEAD FREE PVC Celuka ply (Minimum density 600kg/Cum) of fixed with stainless steel screws, solvent cement /adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed.
Supply and fixing of ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete all as specified and directed. MAKE : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
Supply and fixing of ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and directed. MAKE : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
Supply and fixing of auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed. MAKE : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
Supply and fixing in repair of stainless steel plate rack 1mm thick of size 900mmx900mm x 200mm fixing with rawl plug and steel screws of weight not less than 8 kg each, complete all as specified and as directed.
Supply and fixing in repair of stainless steel sink with drainage board 1.00 mm thick, ISI marked for kitchen with plug, washers and wastes, including bedding in cement mortar on to dwarf wall or fixing contilever brackets of suitable angle iron, CP brass waste coupling, superior quality PVC waste pipe and connecting union to pipe, over all size 915mm x460mm, bowl size 410mm x 330mm x160mm complete all as specified and directed.
Supply and fixing of PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall with MS clamps etc or in floors including dismantling of pipes of any description any length complete all as specified and as directed.
Supply and fixing of PVC (SWR) 75 mm pipe type socket in any length with rubber ring joints fixed to wall with MS clamps etc or in floors including dismantling of pipes of any description any length complete all as specified and directed.
Supply and fixing in repair of 110 mm bore PVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified and directed.
Supply and fixing in repair of 75 mm bore PVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified and directed.
Supply and fixing in repair of 75 mm bore PVC (SWR) plain bend any radius with access door including jointing with solvent cement, complete all as specified and directed.
Supply and fixing in repair of 110 mm bore PVC (SWR) junction single T (equal or unequal) with access door, including jointing with solvent cement, complete all as specified and directed.
Supply and fixing of PVC (SWR) vent cowl of 110mm dia complete all as specified and directed.
Material and labour for salt glazed stoneware gully trap, square or round moulded type 'P', 100x100mm size complete all as specified and directed.
Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed. NOTE:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.50 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided.
Material and labour for precast RCC 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) as in manhole covers, including necessary form work etc, set and jointed in CM 1:4 complete including demolition of existing RCC work etc complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ)
Material and labour for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all directed
Material and labour for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed
Material and labour for providing and injecting chemical emoulsion for post constructional ATT of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.
Material and labour for providing and injecting chemical emulsion for post constructional ATT at points of contact of void of masonry by chemical emulsion (in oil or kerosene base solution) @ 0.5 litre per hole, by drilling and plugging 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed NOTES for Srl item No 98 to 100:- (i) The ATT work shall be carriedout through specialised agency as approved by GE in writing and chemical used shall be approved before execution of work. (ii) 5% amount of the total amount of ATT shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor's quoted rate for this item shall deemed to be inclusive of this aspect..
Dismantling wrought iron or mild steel work of any description not otherwise provided for purlin/rafters, framed truss etc complete all as specified and directed.
Supply and fixing of rolled mild steel in roof trusses (framed), trussed rafter/purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed in position, conforming to Fe-410-W (Gde 250), complete all as specified and directed.
Supply and fixing of mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe-290 (Gde E-165), complete all as specified and directed.
Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based corrugated steel sheet, 0.50mm thick, conforming to IS-15961, of any approved colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer etc including taking down of old AC/CGI etc sheets of any descriptions as existing on site complete all as specified and as directed. NOTE: - The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.
Supply and fixing for pre-painted galvalume, aluminuim zinc coating, GI based plain steel sheet, 0.50mm thick, conforming to IS-15961, of any approved colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer etc including taking down of old AC/CGI etc sheets as existing on site complete all as specified and as directed. NOTE : - The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.
Material and labour for resecuring or easing & adjusting without taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sqm each complete all as specified and as directed.
Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in levelling course complete all as specified and as directed.
Material and labour for chequered cement concrete tiles of size 300X 300 X 25 mm thick with grey cement and pigment set and jointed in neat cement slurry @ 3.00 kg/square metre, and pointed in white or coloured cement to match the surface of tile as in floor and laid over including 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.
Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as copings, bed plates, kerbs, benching, roof kerbs, on edge for sealing interlocking tiles and other bands and the like, finished the surface fair and even, including necessary form work etc complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in soil complete all as specified and directed.
Removing surplus excavated material (soil) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
Material and labour for PCC 1:4:8 type D-2 using 40 mm graded mechanically crushed stone aggregates as in foundation, sub base and mass concrete complete all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregates as in sub base and mass concrete complete all as specified and directed.
Material and labour for RCC (design mix) M-25 using 20mm graded mechanically crushed stone aggregate as in foundations, including rafts, footing, foundation beams, plinth beams, bases for columns etc, basement slab, under-reamed piles and mass concrete etc complete all as specified and directed.
Material and labour for RCC (design mix) M-25 using 20mm graded mechanically crushed stone aggregate as in Columns, pillars, piers, posts and struts etc complete all as specified and directed.
Material and labour for RCC (design mix) M-25 using 20mm graded mechanically crushed stone aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like complete all as specified and directed.
Material and labour for RCC (design mix) M-25 using 20mm graded mechanically crushed stone aggregate as in Beams, cantilevers, bressumers, lintels over 1.5m span etc complete all as specified and directed.
Material and labour for RCC (design mix) M-25 using 20mm graded mechanically crushed stone aggregate as in chajja and the like complete all as specified and directed.
Material & labour for use & waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter including fair finished surfaces complete all as specified and directed.
Material & labour for use & waste for formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work, of fair finished surface (Square, rectangular or polygonal) of concrete complete all as specified and directed.
Material & labour for use and waste of formwork to sides and soffits of floors or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports etc. and similar work of fair finished flat surface of concrete complete all as specified and directed.
Material & labour for use & waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed.
Material & labour for use & waste for formwork to chullah hoods, chajja’s, troughs and similar items including edges of fair finished surface of concrete complete all as specified and directed.
Material & labour for use & waste for form work to edges of concrete flat, treads breaks in floor, window cills, concrete railings, openings in concrete walls, floor and roof and similar work exc 10 cm but not exc 20 cm wide complete all as specified and directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all directed
Supply and fixing of mild steel TMT bars 8 mm dia, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Material and labour for mild steel TMT bars, 8mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacer, binders, etc complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Material and labour for broken stone hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and levelled in layer not exceeding 15cm thick watered and rammed to a true surface complete all as specified and directed.
Material and labour for providing and laying factory made PVC moulded, coloured with grey cement and red pigment, glossy finished, vibrated machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified & as directed. NOTE : - Size and shape of interlocking tile shall be approved by GE
Supply and fixing of powder coated aluminum frame (minimum thickness of powder coating 50 micron) as in frame of door/ window / partitions , etc with one or more rebates including hinges, handles, jointing cleat for fixing etc. complete all as specified and directed. NOTE : - Only aluminium section measured and paid under this item. (ii) Rate quoted by the contractor shall demmed to inclusive for necessary fittings and fixture such as roller, handle locks etc. (iii) Glass, XPM wire mesh shall be measured and paid separately
Supply and fixing of powder coated anodised aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos, hinges type B-21 100mm long (3Nos), anodised aluminum snap beading, screws etc in each door complete all as specified and directed
Supply, fabricate & fixing in position of anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 5.0 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including the cost of EPDM rubber /neoprene gasket required complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) NOTE: - Section No given above are of make Jindal, contractor may use similar section of other make mentioned in relevent Appx
Supply and fixing of 5.0 mm thick tinted glass in square exceeding 0.5 sqm in each pane with heat reflecting properties, black glass file of 50 micron, fixed to aluminium frame with glazing clips, etc., complete all as specified and directed.
Supply and fixing of powder coated anodised aluminium grill made of mesh size 100x100mm of bar 8mm dia using U channel 25x12mm fixed to aluminium frame work including necessary joining cleats, anodised aluminium snap beading screws etc complete all as specified and directed.
Supply and fixing of mild steel harrison rail, chromium plated with fixed brackets, stops, rollers etc complete all as specified and directed.
Supply and fixing of 5 to 8 mm thick plain colour PVC sheet hollow interlocking wall panelling of width 250 mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith PVC 'U' and 'L' beading at corner and end portion where ever required of matching colour complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.
Supply and fixing of semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 475 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge complete all as specified and directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.
Material and labour for APP polymeric water proofing treatement to roof using membrane minimum 3 mm thick and weighting not less than 3.6 kg/sqm , black finish reinforced with non-woven polyster matt (Weight not less than 150 gms/Sqm) with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, by the same membrane manufacturer of density 0.87 to 0.89 kg/ltr at 25' C temprature and viscosity 70-160 cps over the primer coat, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side and 150 mm at the ends and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm below APP and two coats water proofing paint with aluminium finish on top of laid APP surfaces including preparation of surface complete all as specified and directed. NOTES : - (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor's quoted rate for this item shall deemed to be inclusive of this aspect.
Material and labour for PCC 1:2:4 type B-1 using 20 mm graded mechanically crushed stone aggregate as in surface channel and drain etc complete all as specified and directed.
Material and labour for extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc complete all as specified and directed.
Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardant Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic, heavy duty PVC concealed conduit not less than 25mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI flush boxes / sunken boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over sunken box for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan / bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed. NOTES : - (i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.
Description all as per item No 143.00 above but for socket out let point 5 Amps on same board complete all as specified and directed.
Description all as per item No 143.00 above but for socket out let point 5 Amps on independent board complete all as specified and directed.
Description all as per srl item No 143.00 above but point wiring for one socket out let 15 & 5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed.
Supply and fixing of modular switches, one way, 5 amps one module, 230V, 50 Hz supply, complete all as specified and directed.
Supply and fixing of modular switches, one way, 15 Amps, one module, 230 volt, AC supply, complete all as specified and directed.
Supply and fixing of modular socket outlet 5 amps, 2/3 pin combined 2 module, 230 volt, complete all as specified and directed.
Supply and fixing of modular socket outlet 5/15 amps, 5 pin, 2 module, 230 volt complete all as specified and directed.
Supply and fixing of fan regulator step type one module / 2 module, 100w 230 Volts, 50 Hz, AC complete all as specified and directed.
Supply and fixing of ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified.
Supply and fixing of lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified and directed.
Supply and fixing of ceiling fans, AC, single phase, 230V, 50Hzs, copper wounded of 1200mm sweep with BLDC technology, maximum power input upto 35W, copper wire induction motor with 5 star BEE ratins complete alongwith blades, electronic regulator, canopy cover, down rods 'U' clamp, 3 core PVC flexible cable 1 sqmm for making connection of fan and hanging the fan in clamp, connecting with ceiling rose to fan complete all as specified and directed.
Supply and fixing of heavy duty exhaust fan metallic body 300 mm sweep with and including louvers, electric, single phase 1400RPM, 240 volt 50 Hz complete and making suitable hole in existing cement concrete / brick walls built in cement mortar 1:4 and removing unserviceable/loose/broken debris upto 500m distance and making good the disturbed surfaces to match with the existing surface including plastering as required & finishes including grouting four Nos rag bolts, nuts & washers and connecting with 3 core copper flexible cable of size 23/0.0076 including testing & commissioning after installation at site complete all as specified and directed.
Supply, installation and testing of storage type heater (Geyser) of 25 litres capacity, vertical type to sustain high pressure upto 8 bars with fixing bolts / fastener, necessary PCC/cement work and making good the disturbed surfaces to match with existing surface giving electric and water connection and testing after installation to entire satisfaction of the Engineer-in-Charge complete with following specifications : - (a) 5 Star rated (Vertical type) Necessary BEE cerificate from OEM shall be produced by the contractor at the time of sample approval. (b) Metal Body (c) Glass line coated tank (Ferro-glass technology) / Polymer coated. (d) Incoloy glass coated heating element. (e) Adjustable thermostat. (f) Temperature indicator dial/digital type. (g) Multiple Heating Option. (h) Multiple Functional Safety Valve. (j) Thermal Cutout Capillary Type. NOTE : - Warranty certificate to be produced by the contractor from OEM for the following components before processing the bill. (a) For product - 02 Years (b) For metal tank 07 years.
Supply and fixing of indoor decorative LED tube light fitting 1x 20W, 220V, AC decorative box type with opal diffuser, including 20 watt LED tube, T8 with aluminium extrusion heat sink and connecting up with two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light etc complete all as specified and directed.
Supply and fixing of recess/ surface mounted LED flat panel 2' x 2' with high efficient LEDs and glare free full decorative light fitting, 36 watt, energy efficient provided with including LED 36 watt with provision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting and complete all as specified and directed.
Supply and fixing of LED building security light luminaire 45 watt, made up of die cast aluminum housing with black epoxy powder coating with cover heat resistant glass safty input 170 to 270 volts with IP 66 protection and other connected accessories including service bracket made up of GI pipe, light grade, 25/32mm dia, 0.9 metre long, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts including connecting up with two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light complete all as specified and directed.
Supply and fixing of sheet metal enclosure SP with two pin and earth plug and socket including top with one single pole, MCB 20 Amps, 'B' curve, 240 volts complete all as specified and directed.
Supply and fixing of sheet metal enclosures vertical distribution board VTPN, (MCCB DB) 4 ways, double door, 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole thermal release type, 100 Amps, 25 KA as incomer and MCBs as out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs/thimbles/glands and making good the disturbed surface matching with existing surface complete all as specified and directed.
Supply, installation, testing of SPN distibution board 8 way,double door , IP 43, as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles/glands complete all as specified and directed.
Supply and fixing of MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 6 to 32 Amps, including connection with suitable size copper lugs complete all as specified and directed.
Supply and fixing of MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, including connection with suitable size copper lugs complete all as specified and directed.
Supply and fixing of MCB single pole and neutral, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, including connection with suitable size copper lugs complete all as specified and directed.
Material and labour for concealed sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 4.0 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4.0 sqmm, green colour for earth continuity conductor and making good the disturbed surface complete all as specified and directed. NOTES : - (i) 3 run of cable and 1 run of conduit shall be measured as 1 unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary aceessories/fittings.
Material and labour for earthing and material & labour for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh, 50 mm thick precast RCC 1:2:4 type B1using 20 mm graded stone aggregate , reinforced with 8 mm dia dedormed /TMT bars 3 nos both way 12 mm dia round bar handle and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 2009 (Part-I) complete all as specified and as directed. NOTES: - (i) Earth lead wire and its protection pipe upto and including 7.50 mtr only from top of earth electrode are included under this item. (ii) On testing if the earth resistance is not obtained within permissible limit, earthing will be re-done at NO extra cost ,till the desired earth resistance is obtained. (iii) Any joint in earth lead from earth electrode to test point shall not be allowed/permitted.
Supply, laying and testing of cable XLPE insulated, armoured heavy duty electric cable with standred aluminium conductor, 1100 volts grade, cross-sectional area of size 25 Sqmm 4 core complete all as specified and directed.
Material and labour for supply and filling sand with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed. NOTE: - Punned thickness shall be measurement & paid.
Material and labour for brick protection covers over cable using sub class B old size brick laid along length of cable complete all as specified and directed.
Dismantling/taking down carefully aluminium/ copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.
Supply and fixing of indoor decorative LED tube light fitting 1x 20W, 220V, AC decorative box type with opal diffuser, including 20 watt LED tube, T8 with aluminium extrusion heat sink and connecting up with two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.
Supply and fixing of surface mounted LED tube light fitting with high efficient diffuser mirror light, aluminium housing in CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed
Supply and fixing in repair of bracket for security light made up of 25mm dia suitable for security light, 0.90 metre long GI pipe, light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed.
Supply and fixing of LED security light luminaire 45 watt, pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed.
Taking down old unserviceable VTPN MCCB DBs/MCB DBs any size & capacity etc complete all as specified and directed.
Taking down old unserviceable MCB of any size & capacity etc complete all as specified and directed.
Taking down old unserviceable service cable/UG cable any size & type etc complete all as specified and directed.
Taking down old unserviceable submain wiring any size/type including earth wire complete with batten/conduit etc complete all as specified and directed.
Taking down old exhaust fan any sweep or any type and deposited to AGE E/M (South) store yard complete all as specified and directed.
Taking down old ceiling fan any sweep or any type and deposited to AGE E/M (South) store yard complete all as specified and directed.
Material and labour for hanging only ceiling fan any type/ sweep after repair and connecting up including provision of three core PVC insulated and unsheathed copper conductor cable of size 0.5 Sqmm from ceiling rose to connector to fan including refixing of blades complete all as specified and directed.
Taking out of unserviceable earthing and material and labour for earthing and material & labour for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh, 50 mm thick precast RCC 1:2:4 type B1using 20 mm graded stone aggregate , reinforced with 8 mm dia dedormed /TMT bars 3 nos both way 12 mm dia round bar handle and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 2009 (Part-I) complete all as specified and as directed. NOTES: - (i) Earth lead wire and its protection pipe upto and including 7.50 mtr only from top of earth electrode are included under this item. (ii) On testing if the earth resistance is not obtained within permissible limit, earthing will be re-done at NO extra cost ,till the desired earth resistance is obtained. (iii) Any joint in earth lead from earth electrode to test point shall not be allowed/permitted.
NOTE:- Amount of credit of Rs. 27,350.50 for retrieved materials is mentioned in Schedule of Credit Page No 21 & 22 of tender documents in pdf form which will be deducted offline while acceptance of tender.
JS CONSTRUCTION COMPANY
Parveen Kumar
Ashwani Kumar
dhingra builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .