PROVIDING AND LAYING SEWERAGE NETWORK FOR TP ROADS AT TP-84 (Part-B) IN NEWLY ADDED AREA OF NEW EAST (SARTHANA) ZONE-B, SURAT MUNICIPAL CORPORATION.

NAME OF WORK: PROVIDING AND LAYING SEWERAGE NETWORK FOR TP ROADS

AT TP-84 (PART-B) FOR NEW EAST (SARTHANA) ZONE-B, SURAT

MUNICIPAL CORPORATION.

Tender Notice (Online No: DMC/Drainage/11/2025-26 (Work No. 18)

VOLUME-II: PRICE BID

Last date of download of tender : 27/02/2026 to 25/03/2026

documents from website

smctender.nprocure.com

Pre-bid query : Bidders shall have to post their queries on e-mail

address [email protected] on or

before Date:09/03/2026.

Last date of submission of online : Up to 25/03/2026, up to 18:00 hrs.

Last date of submission of tender : From 27/03/2026 to 09/04/2026 to Chief

fees, EMD and other documents in Accountant SMC, Muglisarai, Surat by

hard copy (as mentioned in R.P.A.C./Speed Post up to 17:00 hrs.

Tender Document)

Estimated Cost : Rs. 9,27,40,137.76/-

Earnest Money Deposit (EMD) : Rs.

50% shall be in the form of crossed Demand Draft

of Nationalised Bank payable at Surat and

remaining 50% shall be in the form of Bank

Guarantee of Nationalised Bank (encashable at

Surat) or 100% EMD amount shall be in form of

crossed Demand Draft of Nationalised Bank

payable at Surat

Document Fees : Rs.14,160.00 (Incl. CGST 9% and SGST 9%)

Opening of Tender (Online) : From 27/03/2026, 10.30 Hrs. onwards. If possible

Tender to be submitted to:

The Chief Accountant,

Surat Municipal Corporation,

Muglisarai, Surat – 395

1. NAME OF WORK

PROVIDING AND LAYING SEWERAGE NETWORK FOR TP ROADS AT TP-

84 (PART-B) FOR NEW EAST (SARTHANA) ZONE-B, SURAT MUNICIPAL

1) ESTIMATED COST OF CAPITAL WORK: Rs. 9,27,40,137.76/- (Excluding

(Nine Crore Twenty-Seven lakh Forty Thousand One Hundred Thirty-Seven Rupees

and Seventy-Six paisa only.)

TENDERER’S BID FOR EXECUTION OF CAPITAL WORK:

PERCENTAGE HIGHER / BELOW OF Rs. 9,27,40,137.76/- (Excluding GST)

TENDER AMOUNT (IN FIGURES): Rs. __________________

TENDER AMOUNT (in WORDS): Rs. __________________

Rate Quoted by bidder shall be inclusive of all taxes but Excluding GST. GST shall

be paid extra as per prevailing rules.

SIGNATURE AND SEAL OF THE CONTRACTOR:

NAME AND ADDRESS:

SIGNATURE OF WITNESS:

NAME AND ADDRESS:

2. SCHEDULE – B

SR. RATE AMOUNT

ITEMS QTTY. PER

Excavation for pipe line trenches for

water supply, sewerage line, machine

hole etc. all with shoring and struting if

required as per required gradient and line

including safety provisions using site

rails and stacking excavated stuff

including up to all required lead cleaning

the site etc. complete for all lifts and strata

In hard murrum, boulders incl. macadam 4416.00 155.25 C.M.

Excavation in bituminous road as per

required gradient and line including

safety provisions using site rails and

stacking excavated stuff including up to

all required lead cleaning the site etc.

complete for all lifts as specified.

Excavation in Bituminous road 4416.00 288.65 C.M.

Excavation for pipe line trenches for

water supply, sewerage line, machine

hole etc. all with shoring and struting if

required as per required gradient and line

including safety provisions using site

rails and stacking excavated stuff

including up to all required leadcleaning

the site etc. complete for all lifts and strata

In C.C. Road 1104.00 427.80 C.M.

Excavation for pipe line trenches for

water supply, sewerage line, machine

hole etc. all with shoring and struting if

required as per required gradient and line

including safety provisions using site

rails and stacking excavated stuff

including up to all required lead cleaning

the site etc. complete for all lifts and strata

In all sorts of soil and soft murrum

(A) Upto 1.5 Mt. dpt.from G.L. 73860.00 102.35 C.M.

(F) 7.50 Mt TO 9.00 Mt depth 50.00 162.15 C.M.

SR. RATE AMOUNT

ITEMS QTTY. PER

Providing cutting of existing bituminous

surface up to suitable depth in line and

alignment using Mechnically operated

cutter machine before excavating existing

surface for utility laying including cost of

all type of machinery, fuel, labour etc.

and as per direction of engineer incharge. 11921.00 51.00 RM

Supplying & Filling with fine sand in

compacted thickness over the base

including watering ramming,

consolidating & dressing etc. complete.

Item includes by using vibratory plates

compacted machine and as directed by

engineer in charge 3560.00 329.00 C.M.

Providing and supplying ISI Standard

R.C.C. pipes in standard lengths of

following class and diameter suitable for

rubber ring joints including all taxes,

insurance, transportation,freight charges,

octroi, inspection charges, loading,

unloading, conveyance to departmental

stores, stacking etc. One rubber ring

should be supplied with each full length

socketed pipe, cost included in rates

below.Lowering, laying and jointing of

following diameters in proper position,

grade and alignment at all level as

directed by Engineer-in-charge including

conveyance from stores to site of work,

labour, giving hydraulic testing as per IS

(D1) 250 mm dia (NP3 Class) 3500.00 638.55 Rmt.

(D2) 250 mm dia (NP4 Class) 0.00 868.55 Rmt. -

(E1) 300 mm dia (NP3 Class) 3139.00 891.85 Rmt.

(E2) 300 mm dia (NP4 Class) 309.00 1223.85 Rmt.

(F1) 350 mm dia (NP3 Class) 908.00 1031.95 Rmt.

(F2) 350 mm dia (NP4 Class) 563.00 1531.95 Rmt.

(G1) 400 mm dia (NP3 Class) 231.00 1324.80 Rmt.

(G2) 400 mm dia (NP4 Class) 195.00 2047.80 Rmt.

SR. RATE AMOUNT

ITEMS QTTY. PER

(H1) 450 mm dia (NP3 Class) 0.00 1557.65 Rmt. -

(H2) 450 mm dia (NP4 Class) 192.00 2375.65 Rmt.

(I1) 500 mm dia (NP3 Class) 292.00 1702.35 Rmt.

(I2) 500 mm dia (NP4 Class) 240.00 2554.35 Rmt.

(J1) 600 mm dia (NP3 Class) 1369.00 2208.20 Rmt.

(J2) 600 mm dia (NP4 Class) 482.00 3256.20 Rmt.

(K1) 700 mm dia (NP3 Class) 202.00 3205.20 Rmt.

(K2) 700 mm dia (NP4 Class) 217.00 4208.20 Rmt.

(L1) 800 mm dia (NP3 Class) 0.00 3522.30 Rmt. -

(L2) 800 mm dia (NP4 Class) 0.00 5922.30 Rmt. -

(M1) 900 mm dia (NP3 Class) 319.00 3992.00 Rmt.

(M2) 900 mm dia (NP4 Class) 201.00 7029.00 Rmt.

(N1) 1000 mm dia (NP3 Class) 0.00 5252.25 Rmt. -

(N2) 1000 mm dia (NP4 Class) 0.00 8713.25 Rmt. -

(O1) 1100 mm dia (NP3 Class) 0.00 5533.35 Rmt. -

(O2) 1100 mm dia (NP4 Class) 0.00 9141.35 Rmt. -

(P1) 1200 mm dia (NP3 Class) 0.00 6405.00 Rmt. -

(P2) 1200 mm dia (NP4 Class) 0.00 10210.00 Rmt. -

(Q1) 1400 mm dia (NP3 Class) 0.00 8178.10 Rmt. -

(Q2) 1400 mm dia (NP4 Class) 62.00 14801.10 Rmt.

(R1) 1600 mm dia (NP3 Class) 0.00 11830.55 Rmt. -

(R2) 1600 mm dia (NP4 Class) 0.00 18365.55 Rmt. -

(S1) 1800 mm dia (NP3 Class) 0.00 14355.50 Rmt. -

(S2) 1800 mm dia (NP4 Class) 0.00 20002.50 Rmt. -

(T1) 2000 mm dia (NP3 Class) 0.00 16880.45 Rmt. -

(T2) 2000 mm dia (NP4 Class) 0.00 21718.45 Rmt. -

SR. RATE AMOUNT

ITEMS QTTY. PER

(U1) 2200 mm dia (NP3 Class) 0.00 19405.40 Rmt. -

(U2) 2200 mm dia (NP4 Class) 0.00 23434.40 Rmt. -

Providing and constructing Sewer

machineholes, scraper machineholes and

unit house connection chamber, as per the

type design in brickmasonry in C. M. 1:5

and inside and outside 20mm thick

plastering in C. M. 1:3 necessary 100 mm

coping with reinforcement in

R.C.C.M.200 fixing C. I. steps and fixing

machinehole frame and covers (But

excluding supply of machinehole frame

and covers) over machineholes and house

connection chambers and fixing

machinehole covers (but excluding

supplying of machinehole covers) over

scraper machinehole etc.

complete,providing and fixing safety

chain wherever necessary as per the

stipulations in the type design complete

as per latest CPHEEO manual.(excl.

TYPE-A 1200 mm DIA

(Add or Deduct Rs.662.8 per

0.10 Mt.Depthincrease or

TYPE- B 1500 mm DIA

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.1231.3 per

0.10 Mt.Depthincrease or

SR. RATE AMOUNT

ITEMS QTTY. PER

TYPE-C 1500 mm DIA

(Add or Deduct Rs.1878.6 per

0.10 Mt.Depthincrease or

TYPE-D1 1500 mm DIA

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.2211.00 per

0.10 Mt.Depthincrease or

TYPE-D2 1500 mm DIA

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.2212.10 per

0.10 Mt.Depthincrease or

TYPE-D3 1900 mm DIA

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.2601.50 per

0.10 Mt.Depthincrease or

TYPE - S-1 (RECT.)

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.3190.70 per

0.10 M Depthincrease or

Providing and Fixing in position R.C.C.

ventilating column as per drawing 30.00 16660.00 No.

Dewatering by pumping set of required

capacity including temporary platform

carting pumping at site and fixing the

same in position including all accessories,

and fuel and labour etc. complete.

Pump set of Capacity 5000.00 18.32 HP/Hr

RCC precast M.H. Frame & Cover

Manufacture, supply & Delivery at store

or at site of work precast RCC M.200

Frame & cover suitable to drainage M.H.

and as per type design & Drawing

including cost of reinforcement

M.S.Angles or Flat, curing mold work

(A) For Circular machinehole (heavy 0.00 2294.00 No. -

(B) For Scraper machinehole. 0.00 7289.00 No. -

(C) For House Connection Chamber 0.00 1733.00 No. -

Providing and filling Rubble including

hand packing and filling interstices with

quarry spalls behind abutment and

between ruturns as derected. 0.00 1064.80 C.M. -

Shoring or timbering for trench with

mm thick planks and suitable size struts

etc. complete. 35690.00 81.65 S.M.

Refilling of pipeline trenches incl.

ramming, watering, consolidating

disposal of surplus stuff as directed

within a radius of 3 km. 77595.00 25.30 C.M.

Providing and constructing rectangular

brick masonry chamber for house 1560.00 7922.00 No.

SR. RATE AMOUNT

ITEMS QTTY. PER

connection as per type design in brick

masonry in C. M. 1:3 including M-100 in

foundation M-150 in benching inside

plastering in C. M. 1:3 and outside

plastering in C. M. 1:3 coping in M200

and fixing RCC precast machine hole

frame and covers, but Excl. supply of

machine hole and cover etc. complete

excl. excavation.

Making connection with the machine

hole by boring hole on the masonary of

machine hole and jointing pipe with

cement mortar in prop. (1:2) inside as

well as outside of existing machine

hole,curing etc.complete as directed by

Engineer-in-charge. 0.00 267.86 No. -

Corrugated DWC HDPE pipes (non-

pressure pipes)-Providing and supplying

of Class SN8 Structured Wall

polyethelene Piping systems (Pipe with

online/offline coupler and elastomeric

sealing ring) with non-smooth External

Annular Corrugated and Smooth Internal

Surfaces (Double Wall) for non-pressure

underground Sewerage & Drainage

application as per EN:13476-3 including

all local and central taxes, transportation,

freight charges, octroi, inspection

charges, loading, unloading, conveyance

to the departmental stores etc.

complete.(ID Dia)

Providing and supplying in standard

length ISI mark rigid unplasticised PVC

pipes suitable for potable water with ring

fit joint including cost of rings, as per IS

specification no. 4985/1988 including all

local and central taxes, transportation,

freight charges, octroi, inspection

charges, loading, unloading, conveyance

to the departmental stores and including

cost of jointing meterial etc. complete.

Lowering, laying, fixing and jointing

PVC/uPVC/cPVC pipes and specials of

following class and diameter including

cost of conveyance from stores to site of

works including cost of labour, material,

cement solvent, giving satisfactory 75.00 113.25 Rmt.

SR. RATE AMOUNT

ITEMS QTTY. PER

hydraulic testing as per ISI code.

Work of Temporary diversion of sewage

by plugging the machineholes at

upstream and downstream of the sewer

stretches proposed to be replaced. The

rubber plug required for the plugging the

drainage line shall be procured by the

contractor and the same shall be the

property of contractor.

150mm-400mm sewer line 12.00 20089.29 Nos.

450mm-600mm sewer line 12.00 20982.14 Nos.

700mm-1200mm sewer line 6.00 23660.71 Nos.

Providing & Installation of barricades

incl. supplying, painting, with flurescent

paint and fixing, CGI sheets 24 SWG of

1.80 m height & M.S. posts angle 40 x

x 5 mm at 2.0 m c/c and dismantling the

same after complition of work as directed

by Engineer - in - Charge. 8000.00 196.43 SM

Carting and Recarting of excavted earth

from any site to required place as per

requirement and directed by engineer in

Preparation of as built drawing of

pipeline and different valves laid under

this work by showing location of each

and every pipe in two dimension-

horizontal and vertical with respect GIS

systemalong with invert levels of the

pipeline and different valves . The

Contractor shall submit two sets of as

built drawings periodically, without

which the subsequent R.A. Bill of the 11.92 6250.00 KM

SR. RATE AMOUNT

ITEMS QTTY. PER

work will not be processed payment

purpose. On completion of the entire

work the contractor shall submit as built

drawings for the whole work in six (6)

sets along with two (2) soft copies as

directed by the Engineer-in-charge. The

item includes all required equipments,

materials, man power for execution of

Drilling of various dia Horizontal

borehole for watermain pipeline crossing

under the road incl. in all strata with

required length incl providing and fixing

of various dia M.S/RCC casing pipe with

pushing etc complete for various dia

without Watermain & with Providing

and Fixing of MS Casing pipe of

following diameter.

824 mm OD 12 mm thickness 0.00 22358.84 Rmt. -

924 mm OD 12 mm thickness 85.00 24911.46 Rmt.

1028 mm OD 14 mm thickness 0.00 31065.24 Rmt. -

1232 mm OD 16 mm thickness 0.00 41189.38 Rmt. -

1420 mm OD 20 mm thickness 0.00 57779.51 Rmt. -

1844 mm OD 22 mm thickness 0.00 80070.79 Rmt. -

2248 mm OD 24 mm thickness 85.00 105184.36 Rmt.

Demolition/Dismentalling RCC work or

masonary work or removing of paver

block flooring in any part inculuding

stacking of serviceable/useful material

and disposal of unserviceable material

with all lead and lift.

(a) Brick masonary work/Paver block 25.00 550.40 CM

(b) RCC work 25.00 1057.47 CM

(c) Unreinforced c.c. 25.00 609.26 CM

Providing and Casting in situ mass

cement concrete in grade M10 proportion

1:3:6 (1 cement :3- coarse sand : 6-

graded stone aggregate of 40 mm nominal

size)using granite quartzite trap metal of

size 12mm to 25mm including

consolidation curing etc. complete

Without Formwork 10.00 3662.00 CM

Providing & construction brick work

using Fly Ash bricks having crushing

strength not less than 35 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1

cement:6 sand ) etc. comp. Foundation

and plinth 15.00 4237.00 CM

SR. RATE AMOUNT

ITEMS QTTY. PER

Providing & Applying 15 mm th. Cement

plaster in single coat on brick/concrete

walls similar surfaces for plastring &

finished even & smooth with a floating

coat of cement slurry mixed with

admixture of lime or neeru in required

proportion etc. complete in C.M. 1:3 (1

Cement : 1-sand) 100.00 237.51 SM

Providing and laying cement concrete

1:1.5:3 (1 cement: 1.5 sand: 3 graded

stone agg. 20 mm nominal size)& curing

comp. lnclud.cost of form work but exclu.

Cost of reinforcement for reinforced

concrete work in : (A) Foundation,

footing, Base of columns and Mass

concrete. 10.00 5292.00 CM

Warning tape WARMAT ® Brand PE

warning tape with Anti Rodent Properties

( Con Toxic, Non Hazardous Eco friendly

ROHS Compliance & 100% recyclable)

Moc : LDPE, Roll length : 250 Mtr, Color

: Green, Text : Black / White, Length with

non deletable high abration.

(i) Size : 300 mm width x 100 Micron thk. 150.00 31.25 Rmt

Providing & laying in trenches

galvanised mild steel tubes(medium

grade) TATA / ZENITH / ASIAN /

JINDAL MAKE of the following

nominal bore & tube fittings etc. comp..-

25mm.dia. 50.00 282.18 Rmt

40 mm dia 50.00 425.33 Rmt

65mm dia 50.00 723.83 Rmt

Providing mantaing upto the required

period safe guarding lightening the

excavated trenches with proper

barricading, fencing with timer balles,

bamboos, G.I. sheets, red fiag and red

lights alongwith the provision of the

chowkidars as directed by Engineer-in-

charge 150.00 12.05 Sqmt

Temporary diversion of sewage from

House connection chambers,

Intermediate machineholes and Tee

chambers through 150 mm dia corrugated

Hose pipe supported at suitable distances

from the side and conveying the sewage 10.00 44.64 Rmt.

SR. RATE AMOUNT

ITEMS QTTY. PER

by gravity to the downstream

Providing & construction simple chamber

of 23 cm. th' B.B. Masonary in C.M 1:5

with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C.

top slab with 1:2:4 mix ( 1 cement: 2 Sand

: 4 Grade stone aggregate 20mm size)

,Foundation concrete 1:5:10 & fixing C.I.

cover with frame to be not less than 38 kg.

On top etc. comp. Inside dimension,455 x

610 mm &450 mm deep for single pipe

(A) Same as above but Precast RCC 5.00 2681.76 No.

heavy duty Cover instead of C.I. Cover

Extra for every additional depth of 0.1 mt 0.00 242.39 Each -

beyoung 0.45 mt

Removing of existing pipeline incl.

removal of specials, valves jointing

material including carting and stacking

of removed material from site of work

to the department store as directed excl.

excavation and refilling.

Providing and casting in situ C.C. in

grade M-15 (approx. corresp. to prop.

1:2:4) (proportions as per mix design or

as per Table 9 of IS456 2000 in masses by

weigh batching ) using granite, quartzite

trap metal of size 6 mm to 20 mm for

RCC work, including scaffolding

centering, form work, needle vibrated

consolidation, curing comp. up to 6 meter

depth or height (excluding cost of

reinforcement and neat finishing) with

centering and shuttering/deshuttering etc.

comp. for the thrust block inclg. cost of

form work. With Formwork 5.00 4906.00 Cum

SR. RATE AMOUNT

ITEMS QTTY. PER

Providing and casting in situ C.C. in

grade M-20 (proportions as per mix

design or as per table9 of IS456 2000 in

masses by weigh batching ) using granite,

quartzite trap metal of size 6 mm to

mm for RCC work, including scaffolding

centering, formwork, needle vibrated

consolidation, curing complete up to

meter depth or height (excluding cost of

reinforcement and neat finishing) with

centering and shuttering/deshuttering etc.

complete for structure other than water

retaining (Below G.L) 5.00 5520.00 Cum

Providing and cast in situ C.C. in grade

M-30 proportions of ingredients as per

mix design by weigh batching using

granite, quartzite trap metal of size

mm to 20 mm and or 6 mm to 12 mm

including scaffolding centering

formwork, needle vibrated consolidation,

curing and hydraulic testing etc. complete

(excluding cost of reinforcement) with

centering and shuttering/deshuttering etc.

comp. up to 6 meter height /depth Av.

G.L.for all water retaining structures

( A )Bottom base slab 5.00 6905.00 Cum

( B )VerticalWall/kerb (Th. Above 25 10.00 8083.00 Cum

(C) Column 5.00 9317.00 Cum

(D) Beam 5.00 8486.00 Cum

(E) Slab 5.00 8213.00 Cum

Steel work welded in built up sections,

framed work including cutting, hoisting,

fixing in position and applying a priming

coat of red lead paint (A) in beams &

joists channels angles, tees, flats with

connection plates or angle cleats as in

main & cross beams,hip & trussed purlins

connected to common raffers & the like. 5.00 9047.86 Quintal

Providing, Laying and jointing on true

line and level UPVC pipe (SCH-40) line

of Prince/Supreme/Jain/Astral/

Tulsi/Finolex make including fittings

make or equivalent as approved by

angineer-in-charge. Pipe shall be fixed on

the wall the help of clamp at every two

meter C/C or shall be concealed as

directed including necessary fittings etc.

including testing of pipe and joints and

SR. RATE AMOUNT

ITEMS QTTY. PER

fixing the same with adhesive solvent,

including cost of all materials.

15 mm Dia 50.00 72.65 Rmt

25 mm Dia 50.00 91.84 Rmt

40 mm Dia 50.00 148.12 Rmt

50 mm Dia 50.00 195.67 Rmt

Supplying cutting, bending, binding and

placing in position steel as per plan and

design and as per ISS 2502 including cost

of steel and binding wire for reservoirs /

structures only including lift upto 6 mt.

height or depth below G.L. for all

Thermo mechanically trated (TMT) bars

Fe-500 grade for all diameters. 100.00 77.50 Kg

Providing interlocking type Rubber

moulded cement concrete paver block of

approved shape, design & colour having

60mm thickness (M-35) purchased from

SMC's approved paverblock

manufacturer only & fixing of fine sand

bedding. Item includes levelling by using

vibratory plates compacted machine.

Item also includes all materials, labour,

equipments, tools, plants, watering,

cleaning etc. complete.

(Without colour) 10.00 524.00 Sqm

Providing constructing brick masonry

inlet chamber of 750 x 600 x 1500 mm

internal dimension with necessary

excavation refilling 350 mm thick brick

masonary in CM 1:4, 150 mm thick PCC

and benching in CC 1:2:4, 12 mm thick

plaster in CM 1:3 for inside and cement

pointing in CM 1:3 for outside, providing

and fixing pre-cast RCC frame and cover

of M-30 grade as per drawing and

specifications - Rate for 1.5 m depth. Add

or ded. Rs. 701 for every 10 cm increase

or decrease in depth 55.00 13548.00 No.

Providing, Supplying and fixing brass

ferrule of approved make of following

sizes inclusive all taxes, insurance,

transportion, fright charge, inspection

charge etc. complete

Coloured RCC Precast Machinehole

Frame & Cover Manufacture, supply & 390.00 2294.00 No.

SR. RATE AMOUNT

ITEMS QTTY. PER

Delivery at store or at site of work precast

RCC M-40 Grade Frame & Cover

suitable to drainage machinehole and as

per type design & drawing including cost

of reinforcement M.S. Angles or Flat,

curing mold work etc

(A) Extra Heavy Duty Machinehole

Frame of I.S.I. Mark

(B) For Scraper machinehole 13.00 7289.00 No.

(C) For House Connection Chamber 1560.00 1733.00 No.

TOTAL AMOUNT Rs.

TOTAL AMOUNT Rs.