REPAIRS REPLACEMENT OF INTERNAL ELECTRIFICATION INCLUDING FITTINGS AND FIXTURES IN OTM ACCN IN ZONE D UNDER AGE E M (N) OF GE (NORTH) SECUNDERABAD

Amount

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area and making good the disturbed surfaces of wall/ceiling all as specified & directed by Engr in Charge.

Disconnecting and removing the MCB DBs/AC Box from any height, stripping out the fitting for examine replacement of US spare parts, reassembling, refixing in original position including minor repairs for the smooth functioning and testing complete all as specified & directed by Engg in Charge.

Taking down old submain wiring of any size and type complete all as specified and directed by Engr in Charge.

M&L Concealed point wiring for any length with 1100 volts grade 1.5 sqmm PVC insulated FRLS unsheathed cable with multistrandard copper conductor with ISI marking and including non-metallic PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall/ceiling including continuous earth wire 1.5 Sqmm PVC insulated FRSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in wall and modular white plate covers with frame for mounting of modular switches/sockets/fan regulators etc,for one light/fan point controlled by one switch complete all as specified and directed. Note: Wiring from the DB (distribution box) to switch and sunken modular flush sheet metal enclosures and modular cover plates shall be deemed inclusive in the quoted rate.

All as per Item No. 4 above, but one light point controlled by two way switches.

All as per Item No. 4 above, but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

All as per Item No. 4 above, but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Item No. 4 above, but for using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor Note: Modular cover plate with frame and modular metal flux box and cutting/chases included in the rate quoted.

M&L Surface point wiring for any length with 1100 volts grade 1.5 sqmm PVC insulated FRLS unsheathed cable with multistrandard copper conductor with ISI marking and including non-metallic PVC rigid conduit medium grade of size minimum 20 mm with all accessories in wall/ceiling including continuous earth wire 1.5 Sqmm PVC insulated FRSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in wall and modular white plate covers with frame for mounting of modular switches/sockets/fan regulators etc, for one light/fan point controlled by one switch complete all as specified and directed. Note: Wiring from the DB (distribution box) to switch and sunken modular flush sheet metal enclosures and modular cover plates shall be deemed inclusive in the quoted rate.

All as per Item No. 9 above, but one light point controlled by two way switches.

All as per Item No. 9 above, but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

All as per Item No. 9 above, but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Item No. 9 above, but for using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor

M&L Surface point wiring for any length with 1100 volts grade 1.5 sqmm PVC insulated FRLS unsheathed cable with multistrandard copper conductor with ISI marking and including non-metallic PVC casing caping medium grade of size minimum 20 mm with all accessories in wall/ceiling including continuous earth wire 1.5 Sqmm PVC insulated FRSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in wall and modular white plate covers with frame for mounting of modular switches/sockets/fan regulators etc,for one light/fan point controlled by one switch complete all as specified and directed. Note : Wiring from the DB (distribution box) to switch and sunken modular flush sheet metal enclosures and modular cover plates shall be deemed inclusive in the quoted rate.

All as per Item No. 14 above, but one light point controlled by two way switches.

All as per Item No. 14 above, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

All as per Item No. 14 above, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Item No. 14 above, but for using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor

M&L Surface point wiring for any length with 1100 volts grade 1.5 sqmm PVC insulated FRLS unsheathed cable with multistrandard copper conductor with ISI marking and including non-metallic existing PVC conduit medium grade of size minimum 20 mm with all accessories in wall/ceiling including continuous earth wire 1.5 Sqmm PVC insulated FRSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in wall and modular white plate covers with frame for mounting of modular switches/ sockets/ fan regulators etc, for one light/fan point controlled by one switch complete all as specified and directed. Note: Wiring from the DB (distribution box) to switch and sunken modular flush sheet metal enclosures and modular cover plates shall be deemed inclusive in the quoted rate.

All as per Item No. 19 above, but one light point controlled by two way switches.

All as per Item No. 19 above, but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

All as per Item No. 19 above, but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Item No. 19 above, but for using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor

S & F Modular switch 1 way 6/10 Amps, 1 Module complete all as specified and directed.

S & F Modular switch 2 way 6/10 Amps, 1 Module complete all as specified and directed.

S & F Modular switch 1 way 16/20 Amps, 1 Module complete all as specified and directed.

S&F Modular Bell Push 10A, 1 Module complete all as specified and directed.

S&F Socket outlet modular type multipurpose 2/3 Pin, 6 amps, 230 volts combined 2 Module complete all as specified and directed.

S&F Socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and directed.

S & F Modular ceiling fan regulator stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified and directed.

S & F Switch piano single pole flush type 5 amps, 230 volts complete all as specified and directed.

S&F Bell push 5 A flush type complete all as specified and directed.

S&F Socket outlet flush type multipurpose 2 in 1, 5 Pin, 5 amps, 230 volts complete all as specified and directed.

S & F Switch socket combination flush type multipurpose 2/5 pin 5 amps 2 in 1 230 Volts complete all as specified and directed.

S & F Switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type with complete all as specified and directed.

S & F Ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.

S & F Electronic type regulator stepped heavy duty for ceiling fan suitable to work on 230 volts complete all as specified and directed.

S & F Angle holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and directed.

S&F Bell ding dong working on 230 volts AC Supply complete all as specified and directed.

S&F in replacement of Surface mounted Downlighter 15W with ABS housing and PC Opal diffuser with integral electronic LED driver complete with all accessories complete all as specified and directed.

S&F in replacement of Recess mounting with perforated sheet with electronic driver luminaire 36 watts LED slim panel (2'x2') with central opal diffuser series mounted in grid ceiling surfaces and suitable hanging provision where required including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F in replacement of Surface mounting with perforated sheet with electronic driver luminaire 36 watts LED slim panel (2'x2') with central opal diffuser series mounted in grid ceiling surfaces and suitable hanging provision where required including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F LED Tube Rod 1 x 20 W 4 feet, 230V complete all as specified and directed.

S&F LED flood light fitting 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp for indoor stadium complete all as specified and as directed.

S&F in replacement of Decorative box type surface and wall mounted 4' LED batten 20w with tube and polycarbonate housing & integrated electronic drive etc.complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in replacement of Wall mounted LED Batten, extruded powder coated aluminum housing heat sink provided for efficient heat dissipation & integrated electronic driver 1x10W, 230 Volts, DIFFUSED TYPE connector block, internally pre wired etc including new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed.

S&F in replacement of LED security Light luminaire 25 watts with deep drawn housing including all accessories and Lamp, with suitable pipe bracket 25 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts complete all as specified and directed.

S&F in replacement of LED Bulb 10 watts complete all as specified and directed.

S&F in replacement of Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 10W edge-lit LED luminaire comprising of high brightness LEDs including taking down unserviceable fitting all as specified and directed.

S&F in replacement of Wall light including 9 Watt LED Bulb, Environmental friendly, ultra modern, energy saving, surface mounted complete all as specified and directed.

Supply and fix in replacement of MCB SP 6 to 32 Amps 240 volts, 'B' curve for fixing on MCB DB's complete all as specified and directed.

S & F in replacement of MCB SPN 32 Amps 240 'C' curve volts for fixing on MCB DB's complete all as specified and directed.

S & F in replacement of MCB Four pole, 415 volts, 'C' curve suitable for fixing on MCB DB of capacity 40 to 100 Amps complete all as specified and directed.

S & F Sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with locking system complete all as specified

All as per Item No 54 above, but MCB DB SPN 12 way

S & F in replacement of Horizontal type TPN DB 4 way double door made out of CRCA sheet housing with powder coating & confirming to IS 13032, IS 8623, BS 5486 accommodated suitably in a MS enclosure weather proof made out of 3 mm thick MS sheet having hinged and robust locking arrangement including painting by red-oxide one coat and powder coated complete all as specified and directed.

All as per Sl item No 56 here in before, but VTPN 4 way DB

S & F in replacement of Modular Single pole and Neutral enclosure (Modular AC Box) with a two pin and earth plug and socket complete with one single pole MCB 25 Amps (AC Box) complete all as specified and directed.

M & L Submain wiring with 2 runs of single core 2.5 sqmm PVC insulated sheathed multistranded FR 1100 volts grade with copper conductor drawn through non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25mm dia including one run of single core 2.5 sqmm PVC insulated sheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain wiring complete all as specified and as directed. Note: 3 runs of 2.5 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

All as per Item No 59 above, but 2 runs of single core 4 sqmm and one run of single core 4 sqmm as earth continuity conductor. Note: 3 runs of 4 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

All as per Item No 59 above, but 4 runs of single core 6 sqmm and one run of single core 6 sqmm as earth continuity conductor. Note: 5 runs of 6 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

M&L Earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. Note: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, CI cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh, complete.

M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of andings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm complete all as specified and directed.

S&F in repairs MCCB Four pole, 415 volts suitable for fixing on MCCB DB of capacity 100 Amps, 25KA complete all as specified and directed.

Taking down the geysers of capacity 25 Ltrs from its mounting position by removing all water and electric connections and de-assembling the geyser and carrying out the following works complete all as specified and directed. (a) Descaling, cleaning the inner tank thoroughly and there should not be any bad taste of water. (b) Examining the water tightness of storage tank after cleaning. (c) Examining the physical condition of thermostat, base assembly fusible plug and outer tank for its serviceability. (d) Inspection of pilot lamps. (e) Reassembling the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) and also conducting hydraulic testing. (f) Re-fixing the Geyser and making electric connections, inlet and outlet water connections and testing and checking of all water inlet, outlet valves connected with geysers. Note : Defective /worn out parts if required shall be measured and paid separately under relevant items in this schedule.

S&F in replacement of Rubber PVC gasket to ensure water tightness for 25 Litres capacity complete all as specified and as directed

S&F in replacement of Mild steel base plate cup of any type with screws of suitable size complete all as specified and as directed

S&F in replacement of Heating element of the 2 KW rating including rubber washers of any make and type complete all as specified and as directed.

S&F in replacement of Thermostat suitable for the geyser of 25 litres capacity complete all as specified and as directed

S&F in replacement of PVC insulated multistrandard copper conductor, 1100 Volts grade, un sheathed, 3 core of 2.5 square mm size complete all as specified and as directed.

S&F in replacement of Industrial type plug top 2 pole with earth plug of 20 Amps of 240 volts capacity complete all as specified and as directed.

S&F in replacement of PVC connecting tube of 450mm long with two brass adopters suitable for hot water of 15mm dia pipe superior quality complete all as specified and as directed.

S&F in replacement of Steel inner tank suitable for 25 litres capacity geyser complete all as specified and as directed.

Taking down ceiling fans 48”/56” sweep or Exhaust fans upto 300 mm sweep, removing/cleaning of dust properly cleaning, greasing and overhauling of bearings including refixing in same location and connecting up complete all as specified and directed. Note : 1. Replacement of defective/worn out parts will be measured and paid for separately.

S&F in repairs of Capacitor 2.00/2.50 Mfd complete all as specified and directed.

S&F in repairs of Capacitor 3.15/4.00 Mfd complete all as specified and directed.

S&F in repairs of Ball bearing/Gun Metal Bush of existing ceiling fans on site complete all as specified and directed.

S&F in repairs ‘U’ clamps complete with nut, bolts & split pins Heavy duty, suitable for existing ceiling fan on site complete all as specified and directed.

S&F in repairs M.S. rod for ceiling fans 5 ft long with both end suitable size holes and cut mark complete all as specified and directed.

S&F in repairs Nut, bolts with washers for fan blades fixing of ceiling fan of any make/size/type as per site requirement ( 6 Nos for each set) complete a suitable for existing ceiling fan on site complete all as specified and directed.

M&L Rewinding of burnt Ceiling fan motor/Ex Fan of size 48"/56" sweep with super enameled copper wire of suitable size as per details given below of any make, type, model incl transportation complete all as specified and directed.

S&F in repairs of Exhaust fan motor of sweep 200 mm complete all as specified and directed.

S&F in repairs of BLDC Ceiling fan Driver Board complete all as specified and directed. Make Havells/BAJAJ/Crompton Greaves

M&L Painting of ceiling fans 48”/56” size complete at site, with super synthetic enamel paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

S&F in replacement of Metallic louvers mounted suitable for exhaust fan of 300 to 450 mm on wall complete all as specified and directed.

M & L Making hole to fix the exhaust fan and making good to the disturbed surface complete all as specified and directed.

S&F in replacement of Plastic body including louvers 200 to 300 mm size fan complete all as specified and directed.

S&F in replacement of Motor of plastic body exhaust fan 200mm size complete all as specified and directed.

S& F Modular white cover plate with frame 1 Module ISI mark complete all as specified and directed.

S& F Modular white cover plate with frame 2 Module ISI mark complete all as specified and directed.

S& F Modular white cover plate with frame 3 Module ISI mark complete all as specified and directed.

S& F Modular white cover plate with frame 6 Module ISI mark complete all as specified and directed.

S& F Modular white cover plate with frame 8 Module ISI mark complete all as specified and directed.

S& F Modular white cover plate with frame 12 Module ISI mark complete all as specified and directed.

S&F Surface Mounting Plastic Boxes 1 Module ISI marked complete all as specified and directed.

S&F Surface Mounting Plastic Boxes 2 Module ISI marked complete all as specified and directed.

S&F Surface Mounting Plastic Boxes 3 Module ISI marked complete all as specified and directed.

S&F Surface Mounting Plastic Boxes 6 Module ISI marked complete all as specified and directed.

S&F Surface Mounting Plastic Boxes 8 Module ISI marked complete all as specified and directed.

S&F Surface Mounting Plastic Boxes 12 Module ISI marked complete all as specified and directed.

M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire complete all as specified and directed.

THE DECAN ENGINEERING AND REFRIGERATION COMPANY (BID ID -3373997)

SRI SAI RAM ENTERPRISES (BID ID -3375061)

SANJEEV CONSTRUCTIONS (BID ID -3382115)

Sri Balaji Enterprises (BID ID -3375368)

SRI LAXMI SREENIVASA BUILDERS (BID ID -3376091)