Supply of GLF Spares at Rajahmundry Airport

Amount

Supply of 200W 6.6A Bi-Pin Halogen Lamp with holder for existing PAPI and simple approach as per ICAO/CAR and AAI specification complete as required (make:-OSRAM or other equivalent approved make)

Supply of 105W 6.6A reflector Halogen Lamp with holder suitable for Inset fittings as per ICAO/CAR and AAI specification complete as required. (make:-OSRAM or other equivalent approved make)

Supply of 100W 6.6A Bi-Pin Halogen Lamp with holder for existing Runway End lights as per ICAO/CAR and AAI specification complete as required (make:-OSRAM or other equivalent approved make)

Supply of 150W 6.6A Bi-Pin Halogen Lamp with holder for existing Runway Edge lights as per ICAO/CAR and AAI specification complete as required (make:-OSRAM or other equivalent approved make)

Supply of Electronic converter for LED strip used in signboard for Runway and Taxiway, current ranging from 2.8 Amps to 6.6 Amps, and power rating of 100W.Suitable for Runway/Taxiway Signboards.

Supply of Red Filter suitable for existing Precision Approach Path Indicator (PAPI) as per ICAO/CAR and AAI specification complete as required.(make:-AMA or other equivalent approved make)

Supply of Prismatic green filters for APN fittings threshould lights as per ICAO/CAR and AAI specification complete as required

Supply of Aluminium reflector shield for existing Precision Approach Path Indicator (PAPI) as per ICAO/CAR and AAI specification complete as required (Make : AMA & Model : MK III )

Supply of air filter for PAPI - (AMA make MK III PAPI)

Supply of Clear outer Lens suitable for existing Precision Approach Path Indicator (PAPI) as per ICAO/CAR and AAI specification complete as required.

Supply of 0-10A TRMS, Digital Ammeter suitable to operate in auxiliary supply of 230V, 50Hz AC of size 48mm x 96mm suitable to install in 'NASU' make 4KW CCR as required. (Make: MECO, Model SMP35ST)

Supply of 250A HRC fuse suitable for 50KW NASU Make CCR

Supply of rubber/ Neoprene Gasket suitable for round base plate of Runway/Taxiway edge light fitting / Housing Boxes, as per AAI specification etc complete as required

Supply of straight through jointing kit suitable for 1 x 16 sq.mm AFL cable of 5KV grade. Make: AAI approved make.

Supply of straight through jointing kit suitable for 2 x 6 sq.mm AFL cable of 5KV grade.Make: AAI approved make

Supply of self bonding electrical insulation HT Tape roll (10mtrs ±10% each roll) of width 19-25 mm (3M Make scoth 23), AAI specification complete as required.

Supply of Omega Multipurpose Compound Rubber (Single Side Usage) Specification :gauge 0.8mm & net weight 1Kg each

Supply of Die Cast Double bit type panel locks (Suitable for Milestone LT Panels)

Supply of 18W LED Tube llights,Similar to Make: BAJAJ Model No. BLRB 18W

Supply of 4 feet 18W LED Tube light batten with complete accessory suitable for 240V 50Hz AC , similar to make: BCLSB 20W

Supply of 2 feet x 2 feet, 36 W recess mounted LED luminaires etc. as required (Make:-Crompton CAT No. LCTLRN-36-FO-CDL/ Halonix CAT No. HLFPR22-03-36 CW-R or equivalent).

Supply of ISI marked, antiskid, category III minimum 1000 mm wide, synthetic insulation mats of 3.3 KV grade conforming to IS 15652:2006 with upto date amendments having minimum thickness of 2mm+/-10 % and with stand capacity as per IS for LT installations complete as required. The mat shall be CPRI certified for required voltage grade and other parameters etc

Supply of ISI marked, antiskid, caregory III, minimum 1000 mm wide, synthetic insulation mats of 11KV grade conforming to IS 15652:2006 with upto date amendments having minimum thickness of 2.5mm+/-10 % and withstand capacity as per IS for HT installations as required . The mat shall be CPRI certified for required voltage grade and other parameters etc.

CREATIVE TRADING CO

Manish Electricals

DEEPAKELECTRICALS

electromach sales agencies