Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.6 LAccepted-AOC 27 CHITRAKOOT ENCLAVE NEAR ANURAG NURSARY DEHRADUN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC Acceptance of contract | |
| 2 | L2₹41.7 L+₹2,833 (0.07%)Rejected-AOC VIII BADWALA ARKEDIA GRANT PO PREMNAGAR DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L2 | Rejected-AOC R | |
| 3 | L3₹41.7 L+₹7,827.50 (0.19%)Rejected-AOC WING NO 7 2 10 PREMNAGAR DEHRADUN UK | L3 | Rejected-AOC R | |
| 4 | L4₹44.0 L+₹2.3 L (5.60%)Rejected-AOC 1 259 CHUKKUWALA DEHRADUN UK | DEHRADUN | DEHRADUN | UTTARAKHAND | L4 | Rejected-AOC R | |
| 5 | L5₹44.6 L+₹2.9 L (7.05%)Rejected-AOC 107 NEAR POST OFFICE PRENAGAR DEHRADUN 248 007 UK | DEHRADUN | UTTARAKHAND | 248007 | L5 | Rejected-AOC R |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
5 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
PROVN OF CERTAIN LBW, REVENUE AND MINOR WORKS AT IMA DEHRADUN
2024_MES_639725_1
GE/IMA/T-77 of 2023-2024 9381/E8
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE IMA Dehradun
Ref NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA Dehradun
₹98,000
Yes
18 Apr 2024
30 Jan 2024
7 Mar 2024
31 Jan 2024
5 Mar 2024
13 Feb 2024
Amount
Surface excavation n,exc. 30 Cm deep and averaging 15 Cm deep and getting out in any type of soil all as specified.
Excavation in trenches n. exc 1.5m wide and n. exc 1.5 m deapth for foundation or for shaft etc n. exc 10 Sqm on plan and n.exc 1.50 Sqm in depth and getting out in soft/ loose soil complete all as specified & directed.
Returning, Filling in, with excavated soil including spreading leveling, watering and well ramming in layers not exc 25cm thick in soft/ loose soil complete all as spesified & directed.
Removing excavated material out side IMA campus and depositing where directed at a level n exc 1.5m above the starting point
M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggt) as in sub base filling and mass concrete complete finished evenand fair all as specified and directed
M&F for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed by the Engr-in-Charge.
M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions, for flat & rough finished surfaces of concrete complete all as specified.
M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat & rough finished surfaces of concrete Complete all as specified
M&L TMT bar 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for column and binding with wire 0.90 mm dia complete all as specified
All as per item No.09 above but 8 mm dia as in stirupps, spacers and binders complete all as specified
M& L for reinforced cement concrete nominal mix type B1, 1:2:4 (using 20 mm graded crushed stone aggregate ) as in foundations, including rafts, footings, bases for columns, etc. all as specified
All as per item No. 11 above but in Columns, pillars, piers, posts and struts etc
All as per item No.11 above but in Beams, cantilevers, bressummers, lintels, etc over 1.5m span
S & F MS angle/TEE/Hollow/tubular section as in main and cross beams,hips,and jack rafter, purlins, trussess where connected to common rafters and etc. all as directed by engr- incharge confoming to Fe-290 Gde E-165. Make:- JSW Steel/ Tata Steel/ Jindal Steel
M & L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment Fe- 290 (Gde E- 165). Make:- JSW Steel/ Tata Steel/ Jindal Steel
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steeel sheet 0.50mm thick colour having tensile strength of 550 Mpa and 150 gram/Sqm as in roof covering/cladding to wall fixed with self tapping screws as specified. Make:- Tata Blue Scope/ JSW Color on+/ Charminar
S&F pre-painted galvalume aluminium zinc coating GI based Plain steeel sheet 0.50mm thick colour having tensile strength of 550 Mpa and 150 gram/Sqm as in roof covering/cladding to wall fixed with self tapping screws as specified. Incl. dismantling of old AC/CGI/ridges cement sheet all as specified. Make:- Tata Blue Scope/ JSW Color on+/ Charminar
M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer.
M & L for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed.
M & L for rendering on walls, 15 mm thick in cement mortar(1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using using extra cement all as specified and directed.
M& L for Rendering 15 mm thick on other than fair face of brickwork or concrete surface in cement mortar using WPC and finishing the surface even smoothg without using extra cement.
Preparation of new surface of wall and applying two of distemper oil emulsion (OBD) over a coat of primer complete all as specified and directed.
M & L two coats of cement based paint on newly plastered surface over a coat of chalk whiting including all preparation complete all as spd and directed.
Supply only liquid water proofing compound complete.
M&L for Hardcore of broken stone or boulders of gauge n exc. 63mm, deposited, spread and leveliled in layers n exc. 150mm thick, watered and rammed to a true surface all as specified and directed.
M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone agg) as in sub-bases all as specified and directed.
M&L for 100 mm thick cement concrete, type B-1 (1:2:4) (using 20mm graded crushed stone aggregate), as in hard standing incl finishing cement concrete surface even and smoothsmooth with using extra cement, complete all as specified.
M & L for machine cut Kota stone 18 to 20 mm thick over cement screed base 20mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and polishing complete up to desired finish as directed .
All as per item No. 28 above above but on vertical surfaces such as skirting, dado, riser etc over and incl 15mm thick cement plaster in cement mortar 1:4 rough finisher surface to receive tiles
M & L for machine pressed Red/Yellow coloured rubberised glossy finish precast concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete all as specified. Make:- Sagar tiles/ Ferrocon/ Tulip tiles
M&L for sand filling under floor or in fondation including watering and consolidation complete.
M & L for chequered polished cement tiles heavy duty, 30CM X 30CM X 22 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement mixed with colour pigments complete all as specified. & directed, including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and directed. Make:- Sagar tiles/ Ferrocon/ Tulip tiles
M & L for 20 mm thick screed bed or bedding layer of mortar in 1:6 for laying of flooring complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone agg), as in bed plate cill steps coping,similar bands kerb etc complete all as specified and directed
M&L for 75 mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone agg) as in plinth protection finished even and smooth without using extra cement.
S&F 4 mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605 mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres all as specified and as directed by Engineer-in charge (size of main tee 38 mmX25 mmX 1.4 mm, cross tee 38 mm X 25 mm X 1.4 mm angle along walls 38 mm X 25 mm X 2.0 mm) and two coats of oil bound emulsion complete all as specified and directed including dismantling boarding any description fixed in any position with nails.
S&F Pressed steel frames for doors(125x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete.
S&F factory made 2nd class hard wood 35mm thickness plain framed, panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated.
S & F factory made 35mm IInd class hard wood glazed/guage skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded ,fitted with cut and mitered bead for securing glasses etc, window ventilators etc are provided with stiles and rails as specified in SSR Part-I, 1991, Section- 8, Clause 8.20(b), complete all as specified and directed.
S & F Steel windows box type with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded incl cutting holes in wall for inserting holdfast and making good to the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.
S & F Steel windows box type with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded incl cutting holes in wall for inserting holdfast and making good to the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.
S & F framed work such as grills, gratings, etc .with ends of bars shouldered and/ or riveted , or forget into spikes ; framed guard bars barallel iron doors and similar work conforming to Fe.290.Gde-E-165.
Supply and fix only 100mm long butt hinges medium weight stainless steel all as specified and directed.
S & F 200mm long stainless steel barrel tower bolts specified and directed.
S & F 150mm long stainless steel handle.
M & L 300mm long aluminium alloy anodised sliding door bolt, plate type stove enamelled black with bright bolt not less than 12mm dia and including minimum 6 bolts and nuts etc all as specified and directed.
M&L 300mm long ordinary rat tail rod pattern spring including roller and plate complete.
M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer
M&L for Preparation new wooden surfaces any description over 10 Cm width or girth and applying two coats of synthetic enemelled paint over one a coat of pink primer complete all as specified and directed.
S&F second class hardwood, plain solid, straight, chowkats and framed rebated on solid,rounded or chamfered put together with glue pinned at joint complete all as specified and dircted
M & L 300mm long stainless steel sliding door bolt, plate type stove enamelled black with bright bolt not less than 12mm dia and including minimum 6 bolts and nuts etc all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples all as specified.
Excavation in post holes (or similar holes) each n' exc 0.5 Cum getting out returing, filling in and ramming earth or brocken rubble mixed with earth around in layers not exceeding 25 Cm complete all as specified and directed.
M & L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete as in post holes etc. complete all as specified and directed.
S & F Rolled MS in Joist,Channel, angle orTEE sections fixed independently without connecting plates complete all as specified and directed confoming to Fe-290 Gde E-165. Make:- Jindal steel/ Tata Steel/ JSW steel.
Demolition of cement concrete in ground floor and pavings n.exc. 15 Cm thick below or above ground level. (un renforced).
M & L 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded crushed stone agg) as in floor and finished the surface even and smooth with using extra cement all as specified.
Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off out side IMA premises.
M&L for Glazed ceramic coloured tiles of size 450 x 300 x 7 to 8 mm, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in tile grout to match the shade of tiles over and including 10 mm thick rendering in cement mortar (1:4) finished rough surface to receive tiles complete all as directed
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.
Cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all specified and directed
S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.
S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.
S&F Vitreous china any shade cascade floor mounted single piece closet P/S trap, with cistern Shell and lid, dual flush, premium range, complete set incl PVC seat cover, jet and connected fitting. Make : Parryware/CERA/ HINDWARE
S&F oval shaped vitreous china WHB table top colonia snow white, fancy type of overall size 595 x 380mm, Cat No 7751 of Cera or of equivalent make specified here-in-after including 32mm CP waste coupling, PVC waste pipe etc complete, including granite slab counter of black colour as approved and of size 0.60mtr x 0.60mtr including cutting nitches rounding edges etc complete, horizontally supportred by 01 No. of 35mm thick cuddappa stone slab one side mirror polished all as specified and directed by Engr-in-Charge.
S&F Vitreous china wash basin, white, flat back, size 550x400mm including bracket, coupling, waste pipe fixed in repair complete all as directed.
S&F 15mm bore long body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed.
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repairs sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long.
S&F Corner glass shelf assembly with bracket complete all as specified and as directed.
S&F in repairs of toilet paper holder of stainless steel fiexed to walls with chromium plated brass screws.
S&F CP brass hot & cold mixer cast copper alloy with centre hold for WHB and long shank fancy type 15m bore complete all as directed by Engineer-in-charge. Make : Hindware/Cera/Jaquar
S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flangs in complete all as specified. Make : Jaquar/ CERA/HINDWARE
S&F CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy. Make : Jaquar/ CERA/HINDWARE
S&F CP fancy type twin Angle valve 15mm dia (angle cock) cast copper alloy. Make : Jaquar/ CERA/HINDWARE
S&F CP brass shower rose fancy type 20x20m with extension Arm pipes CP Make : Jaquar/ CERA/HINDWARE
S&F in repairs CP Helth faucet telephonic type with CP flexible pipe . Make : Jaguar or equivalent CERA/HINDWARE
M&L for scrapping and preparation of surface of wall / ceilling and applying 1mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instruction complete all as specified and directed.
Preparation of surfaces of wall / ceiling and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed.
PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.
PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.
PVC branch pieces single ordinary or inverted or with parallel branches 110mm dia fitted with oval access doors fixed in repair complete all as specified and directed.
PVC branch pieces single ordinary or inverted or with parallel branches 75 mm dia fitted with oval access doors fixed in repair complete all as specified and directed.
PVC bends fitted with oval access doors 75 mm dia any radius diminishing pieces or tapers fixed in repairs, complete all as specified and directed.
PVC bends fitted with oval access door 110 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.
PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.
PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make:- Ecocell/ Black Cobra/ Rajshree
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) Make:- Ecocell/ Black Cobra/ Rajshree
MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed
M&L for 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.
M&L for 100mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed
M&L for 18mm thick one side prelaminated colour WPC Sheet for cup board shutter and frame & fixed at site colour as approved by Engr-in -Charge fixed in repair complete all as specified and directed. Note :- Board edges properly finished with strip on band edges. Make:- Ecocell/ Black Cobra/ Rajshree
S&F Auto closing hinges 35 mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele
S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele
S&F in repairs Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with hole for waste pipe complete all as specified and directed.
S&F in repairs brass chromium plated towel rail, 20mm dia 'D' type 60Cm long between flanges, complete all as specified and directed. Make : Jaguar/Cera/Prayag
S&F in repair brass chromium plated towel ring complete all as specified and directed. Make:- Jaquar/ Cera/ Prayag
S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.
S&F Ball valve 15mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks etc for embedding hold fasts complete all as specified and directed.
M & L brick work with fly ash bricks, Straight or curved on plan to any radius in half brick thick walls complete built in cement mortar 1:6 all as Specified and Directed
M&L for rendering12mm thick ready mix concrete on brick or concrete surface, finishing even and smooth complete all as specified and directed. Make:- ACC/ Birla/ Ultratech/ Unicrete.
M&L for preparation of new treated surfaces and apply one coats of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger/Nerolec) over a coat of primer complete all as directed.
M&L moorum / red bajri filling in floors or pavings laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M & L Cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggreate) 100 mm thick as in flooring, finished even and fair complete all as specified and directed.
M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.
S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed
S&F Steel ventilator factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed
S&F in repairs Vitreous china wash down water closed pan ( Pedestal) white (exc flushing cistern & Pipe ) incl connection to trap and flushing pipe all as specified and directed
S&F 100 mm bore Cast Iron ‘P’ or ‘S’ trap all as directed.
S&F 100mm cast iron sanitary connection socket to fit WC out-let
S&F in PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete. Make:- Parryware/ Cera/ Jaquar
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.
S&F PTMT waste coupling of 32mm dia for wash basin all as specified and directed.
S&F 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts all as specified and directed by Engr-in-charge.
Supply of Sentry post outer size 5' x 4', floor height 2.65m and total height upto roof 5.00m (upto lowest portion of roof) consisting of following specifications (i) MS hollows pipe 75mmx75 mm ( heavy weight) ISI Marked as in vertical post - 04 Nos (ii) MS hollows pipe 50mmx50mm (heavy weight) ISI Marked in base platform, additional vertical support of base,roof memebers, parapet (iii) Pre-painted Galvalume Sheet 0.50mm thick 150 GSM in roof. Make JSW (colouron plus)/ JINDAL/ TATA Blue scope. (iv) 1.00m thick MS Sheet in parapet including painting (v) Acrylic sheet 4.0mm thick inner side of parapet 5' x 4' size (vi) Glass wool in between MS sheet & Acrylic sheet 25 mm thick (vii) MS Chequered plated 3.0 mm thick in plateform (viii) MS plate 1'x1' X 6.0 mm thick as in base of vertical post with 16mm dia 4 hole (ix) MS pipe 75mmx50mm (Medium Weight) as in ladder pipe upto plateform ht (x) MS flat iron 40x3mm outer frame & 25mmx3mm flat 5 Nos iron inside frame as in steps size 2'x10" (xi) MS round pipe 25mm dia (Midium Wt) in hand rail and MS square pipe 25mmx25mm (Medium Wt) as in balusters of ladder (xii) All MS surface shall be painted with synthelic enamel paint 2 coat over a coat of red order primer
Transportion, Erection and fixing of above Sentry post at site complete all as directed.
Supply of Sentry post based on temporary specifiactions given below :- (a) Supply of Sentry post outer size 5' x 5', floor height 2.85m and total height upto roof 5.25m (upto lowest portion of roof) consisting of following specifications (i) MS hollows pipe 75mmx75 mm ( heavy weight) ISI Marked as in vertical post - 04 Nos (ii) MS hollows pipe 50mmx50mm (heavy weight) ISI Marked in base platform, additional vertical support of base,roof memebers, parapet. (iii) Pre-painted Galveume Sheet 0.50mm thick 150 GSM in roof. Make JSW ( colouron plus)/ JINDAL/ TATA Blue scope (iv) 1.00m thick MS Sheet in parapet including painting (v) Acrylic sheet 4.0mm thick inner side of parapet 5' x 4' size (vi) Glass wool in between MS sheet & Acrylic sheet 25 mm thick (vii) MS Chequered plated 3.0 mm thick in plateform (viii) MS plate 1'x1' X 6.0 mm thick as in base of vertical post with 16mm dia 4 hole (ix) MS pipe 75mmx50mm (Medium Weight) as in ladder pipe upto plateform ht (x) MS flat iron 40x3mm outer frame & 25mmx3mm flat 5 Nos iron inside frame as in steps size 2'x10" (xi) MS round pipe 25mm dia (Midium Wt) in hand rail and MS square pipe 25mmx25mm (Medium Wt) as in balusters of ladder (xii) All MS surface shall be painted with synthelic enamel paint 2 coat over a coat of red order primer
Transportion, Erection and fixing of above Sentry post at site complete all as directed.
Preparing new plastered surfaces of wall and applying there coats of white wash complete all as specified.
Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in existing conealed conduit with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following. Make of wire: Anchor, Havells, Plaza, SCI Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.
One light point controlled by one, one way switch 5 Amps
One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator
One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.
One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.
All as per item No.127 above but with stranded copper conductor 2.5 Sqmm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.
Supply and fix Switch piano, flush type, single pole one way, 5 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells.
Supply and fix Switch piano, flush type, single pole, one way, 15 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells.
Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 5 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells.
Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 5 &15 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells.
Supply and fix Electronic step rotary type fan regulator 100W, 230 volts AC 50Hz complete all as specified and directed Make:- Anchor/Legrand/Havells.
Supply and fix Ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate /isolated body complete all specified and as directed. Make:- Anchor/Legrand/Havells.
Supply and Fix LED 2 x2 feet recess mounted light fitting of lumens 3600 lumens ,CRCA housing,Polycarbonated Cover for More protection , fully diffused ,system efficacy 100L/W,Epoxy powder coated with any additional treatment for smooth and anti corrosive finish., IP-20 and IK-20,high bright LED lamp, colour temp not less than down 6500 Cool Day Ligh,colour rending index not less than 80 ,life not less than 25000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270 V AC, 50 Hz, surge protection minimum 2 KV, including connected the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose including taking down old unsv light fitting complete all as specified and directed. Make: - PHILIPS /CROMPTON/ HAVELLS
Supply and Fix LED street/Security wall mounted light fitting of lumens 2550 lm ,Single Piece High pressure die cast aluminium,system efficacy 1100L/W,Epoxy powder coated with any additional treatment for smooth and anti corrosive finish, fully diffused ,Polycarbonated Cover for More protection ,inbuilt electronic driver IP 66 ,High bright LED with Lens, colour temp Not less than 5700 Cool Day Light,colour rending index not less than 70 ,life not less than 50000 hrs,inbuilt electronic driver with 325V Auto Cut off Restart feature & 440V Phase to Phase protection till 8 hour, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz ,surge protection minimum 4 KV, including connected the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose including taking down old unsv light fitting complete all as specified and directed. Make: - PHILIPS /Bajaj/HAVELLS
Supply and fix metal body exhaust fan 300 mm sweep, 900 rpm 230 volts 5h Hz, energy saving model single phase copper wound motor, grey in colour complete with blade, box type louvers etc including taking down old unsv serviceable exhaust fan and deposited to the store. complete all as specified and directed. Make: - Orient /Khaitan/Bajaj
S & F MCB DB SPN 16 way complying with IEC 61439 -1 & 3., sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed. All the above mentioned specs the technical documents from OEM shall be provided at the time of bidding of following capaity .
S & F MCB SP /SPN complying to IS/IEC 60898, 240 volts 'C' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned speification/ technical documents from OEM shall be provided at the time of bidding of following capaity. Make: Legrand, L&T, ABB, Schneider
MCB SP 240 volts, 50 Hz capacity 6-32 Amps
SPN 240 volts, 50 Hz capacity 40 to 63 Amps( 12 Way DB)
Supply and fix ceiling fan complete with blade ,down rod 230 Volts AC ,1200 MM Sweep Min air delivery 210 CFM Five star rated with brushless direct current ( BLDC)motor connected with ceiling rose etc complete all as specified and directed. Make:- Almonard /orient/Cromption
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size10 sq mm 2 core. Make:- SCI, Plaza, Gemscab, Grandlay
M & L for sand cushioning to UG cables (8 Cm deep before laying of cable and 15Cm deep over the cable) Note : Punned thickness will be measured.
Suppy and laying un-reinforced precast cement cable cover ,cass LV,type -I flat size 250x150x40mm Make:- Sagar tiles/ Ferrocon/ Tulip tiles
Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I all as specified and directed.( earthing for each main Panel )
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.
Material and labour for Modular point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in nincluding non rigid PVC Conduit concealed in wall with all fitting not less than 25 mm dia and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box of required size factory made for mounting Modular switch, regulators etc with and including Modular cover and frame , ISI marked, for the following. Make of wire: Finolex, Havells, Polycab Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box.
One light point controlled by one, one way switch 5 Amps
One fan point/ exhaust fan point controlled by one, one way switch 5 Amps
One 3 pin 5 Amps switch socket outlet point controlled by one switch on Same board.
One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.
All as per item No.146 above but with stranded copper conductor 2.5 Sqmm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.
Supply and fix modular switch 1 way 6A, 1 Module
Supply and fix modular switch 1 way 16A, 1 Module with indicator lamp
Supply and fix modular socket 6A, 2/3 pin combined 2 Module
Supply and fix modular socket 6A/16A, 2/3 pin combined 2 Module
Supply and fix modular fan regulators step type 2 module 120W .
Supply and fix LED batten light fitting of lumens 2500 lumens wall mounted ,high pressure die cast alluminium, fully diffused ,polycarbonated diffuser,inbuilt electronic driver IP-20 ,high bright LED lamp, colour temp not less than 5700 COOL DAY Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2.5KV. Make: - PHILIPS /Bajaj/Havells
Supply and fix LED batten light fitting of lumens 1200 lumens wall mounted ,high pressure die cast alluminium, fully diffused ,polycarbonated diffuser,inbuilt electronic driver IP-20 ,high bright LED lamp, colour temp not less than 5700 COOL DAY Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2KV. Make: - PHILIPS /Bajaj/Havells
Supply and fix in replacement of plastic body exhaust fan 250 mm sweep, 1400 rpm 230 volts 5h Hz, energy saving model single phase copper wound motor, white in colour complete with blade, box type louvers etc complete all as specified and directed. Make:- Havels / Bajaj/Usha.
S & F sub main wiring with 2 run (2 x 2.5 Sqmm + 1 x 2.5 sqmm) PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in and including Concealed conduit including one run PVC insulated unsheathed cable with multi stranded copper conductor as a earth continuity and connected upto DB of following sizes complete all as specified and directed. Note:Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. Make:- SCI, Plaza, Havells, Grandlay
S & F MCB DB SPN, 8 way complying with IEC 61439 -1 & 3., sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed. All the above mentioned specs the technical documents from OEM shall be provided at the time of bidding of following capaity .
Supply and laying in replacement XLPE cable 6 Sqmm x 2 Core insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade follwing crosectional area fixed on wall or burried in ground up 30 cm in PVC pipe all as specified and directed. Make: POLYCAB/Finolex/GEMSCAB, Gloster, Grandlay, SCI.
Aggrawal Builders and Furnishers
M/S S P BUILDERS
Sharda Enterprises
M/s Vinod Singh Negi
M/s RK ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .