Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.7 LAccepted-Finance | L1 | Accepted-Finance Being Lowest Vendor | |
| 2 | L2₹17.5 L+₹82,288 (4.92%)Rejected-Finance | L2 | Rejected-Finance being not L1 | |
| 3 | L3₹17.8 L+₹1.1 L (6.48%)Rejected-Finance | L3 | Rejected-Finance being not L1 | |
| 4 | L4₹18.3 L+₹1.6 L (9.60%)Rejected-Finance DOOR NO 1 1 K M PALEM VILL A KOTHAPALLI POST DEVARAPALLI MD ANAKAPALLI DIST 531 022 | ANAKAPALLI | ANDHRA PRADESH | 531022 | L4 | Rejected-Finance being not L1 | |
| 5 | L5₹19.3 L+₹2.5 L (15.1%)Rejected-Finance | L5 | Rejected-Finance being not L1 |
| Sl No | Description | Qty | Unit | SATYAMEGHA ENGINEERS L3 | K RESHMA ENGINEERS & CONTRACTORS L4 | M/s Sai Venkata Durga Constructions L5 | DHEERU BUILDERS L9 | SRI SIMHADRI COMPANY L1 | GITANJALI ENGINEERING CORPORATION L2 | prasad constructions L8 | SREE HANUMAN ENTERPRISES L7 | GVR CONSTRUCTIONS L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster on walls/ceiling etc., including racking out joints hacking for key, scrubbing down with water complete all as specified and directed. | 350 | SqM | 25 ₹8,750 | 30 ₹10,500 | 41 ₹14,350 | 55 ₹19,250 | 9 ₹3,150 Lowest | 22 ₹7,700 | 25 ₹8,750 | 40 ₹14,000 | 26 ₹9,100 |
| 2.00 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement and using WPC at the rate of 3% by weigth of cement complete. (WPC will be paid separately).including preparation of new plastered surfaces of wall, 3mm thick wall care putty and finishing surface with applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces, complete all as specified and directed. | 120 | SqM | 320 ₹38,400 | 400 ₹48,000 | 445 ₹53,400 | 195 ₹23,400 Lowest | 280 ₹33,600 | 255 ₹30,600 | 457 ₹54,840 | 400 ₹48,000 | 356 ₹42,720 |
| 3.00 | M&L for rendering 10mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces of wall finished even & smooth (without using extra cement), including preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer with 3mm thick wall care putty on wall complete all as specified and directed. | 180 | SqM | 300 ₹54,000 | 360 ₹64,800 | 369 ₹66,420 | 150 ₹27,000 Lowest | 240 ₹43,200 | 215 ₹38,700 | 385 ₹69,300 | 300 ₹54,000 | 289 ₹52,020 |
| 4.00 | M&L for rendering 5mm thick cement plaster 1:3 on fair faces concrete surfaces of ceilings finished even & smooth(without using extra cement), including preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. | 50 | SqM | 210 ₹10,500 | 245 ₹12,250 | 315 ₹15,750 | 200 ₹10,000 | 282 ₹14,100 | 155 ₹7,750 | 277 ₹13,850 | 150 ₹7,500 Lowest | 226 ₹11,300 |
| 5.00 | Supply only integral water proofing compound all as specified and directed. | 10.5 | Ltr | 40 ₹420 Lowest | 55 ₹577.5 | 100 ₹1,050 | 250 ₹2,625 | 99 ₹1,039.5 | 75 ₹787.5 | 97 ₹1,018.5 | 150 ₹1,575 | 58 ₹609 |
| 6.00 | Complete removal of existing treatment on walls and M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface over with one coat of birla putty complete all as specified and directed.
Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. | 1,450 | SqM | 100 ₹1,45,000 | 160 ₹2,32,000 | 145 ₹2,10,250 | 220 ₹3,19,000 | 98 ₹1,42,100 Lowest | 125 ₹1,81,250 | 169 ₹2,45,050 | 120 ₹1,74,000 | 142 ₹2,05,900 |
| 7.00 | M&L for complete removal of existing treatment on walls and applying two coats of distemper oil emulsion by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface over one coat of primer over 3mm thick wall care putty complete all as specified and directed.
Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. | 900 | SqM | 90 ₹81,000 | 130 ₹1,17,000 | 96 ₹86,400 | 165 ₹1,48,500 | 78 ₹70,200 Lowest | 125 ₹1,12,500 | 133 ₹1,19,700 | 130 ₹1,17,000 | 122 ₹1,09,800 |
| 8.00 | M&L for preparation of existing treatment on walls and applying one coat of distemper oil emulsion by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface complete all as specified and directed.
Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. | 1,850 | SqM | 40 ₹74,000 Lowest | 40 ₹74,000 Lowest | 49 ₹90,650 | 110 ₹2,03,500 | 78 ₹1,44,300 | 85 ₹1,57,250 | 52 ₹96,200 | 120 ₹2,22,000 | 46 ₹85,100 |
| 9.00 | M&L for complete removal of existing treatment on ceiling and applying two coats of distemper oil emulsion by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface over one coat of primer over 3mm thick wall care putty on ceiling complete all as specified and directed.
Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. | 50 | SqM | 80 ₹4,000 | 120 ₹6,000 | 75 ₹3,750 Lowest | 200 ₹10,000 | 78 ₹3,900 | 98 ₹4,900 | 142 ₹7,100 | 100 ₹5,000 | 122 ₹6,100 |
| 10.00 | M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed. | 150 | SqM | 10 ₹1,500 Lowest | 15 ₹2,250 | 15 ₹2,250 | 40 ₹6,000 | 18 ₹2,700 | 10 ₹1,500 Lowest | 16 ₹2,400 | 20 ₹3,000 | 16 ₹2,400 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
13 Nov 2025, 6:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) DM Visakhapatnam
GE (I) DM Visakhapatnam
PERIODICAL SERVICES TO THE CERTAIN CIVIL STRUCTURES ALONG THE NORTH AVENUE FOR VIP/VVIP VISIT AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE(I) DM VISAKHAPATNAM
2025_MES_736559_1
8331/E8
Open Tender
Civil Works
Item Rate
180 days
Naval Dockyard Visakhapatnam
As per tender document
8 documents required · 8 mandatory
₹500
GE (I) DM VISAKHAPATNAM
₹80,000
Yes
1 Jan 2026
23 Oct 2025
15 Nov 2025
23 Oct 2025
13 Nov 2025
6 Nov 2025
24 Oct 2025 - 4 Nov 2025
Amount
Taking down cement plaster on walls/ceiling etc., including racking out joints hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement and using WPC at the rate of 3% by weigth of cement complete. (WPC will be paid separately).including preparation of new plastered surfaces of wall, 3mm thick wall care putty and finishing surface with applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces, complete all as specified and directed.
M&L for rendering 10mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces of wall finished even & smooth (without using extra cement), including preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer with 3mm thick wall care putty on wall complete all as specified and directed.
M&L for rendering 5mm thick cement plaster 1:3 on fair faces concrete surfaces of ceilings finished even & smooth(without using extra cement), including preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Supply only integral water proofing compound all as specified and directed.
Complete removal of existing treatment on walls and M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface over with one coat of birla putty complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M&L for complete removal of existing treatment on walls and applying two coats of distemper oil emulsion by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface over one coat of primer over 3mm thick wall care putty complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M&L for preparation of existing treatment on walls and applying one coat of distemper oil emulsion by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M&L for complete removal of existing treatment on ceiling and applying two coats of distemper oil emulsion by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface over one coat of primer over 3mm thick wall care putty on ceiling complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for complete removal of existing treatment of old surfaces of wall and applying two coat of weather proof exterior emulsion paint by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface over one coat of primer over 3mm thick wall care putty complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M&L for preparation of old surfaces of wall and applying one coat of weather proof exterior emulsion paint by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface complete all as specified and directed.
M&L for preparation of old surfaces of wall and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old surfaces of ceilling and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying a coat of aluminium paint complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description, over 10cm in width or girth,not otherwise described and finishing the coat with synthetic varnish complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for finishing walls with textured exterior paint of required shade: New work( two or more coats applied @3.28ltr/10sqm) over and including priming coat of exterior primer applied @ 2.20kg/10sqm complete all as specified all as specified and directed.
Note: 1. The above quoted items Ser No 1.00 to 19.00 are to be executed with:- (a) proper safety gears and necessary double scaffolding arrangements to carry out the repair works. The rates quoted shall be accordingly considered for all the safety measure, scaffolding, height, lead and lift in the items. (b) The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Colour wash, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (c) The contractor shall submit Memorandum of Understanding with manufacturer of paint within one month of acceptance of work
GITANJALI ENGINEERING CORPORATION (BID ID -3473339)
SATYAMEGHA ENGINEERS (BID ID -3470791)
K RESHMA ENGINEERS & CONTRACTORS (BID ID -3471560)
M/s Sai Venkata Durga Constructions (BID ID -3473281)
GVR CONSTRUCTIONS (BID ID -3470410)
SREE HANUMAN ENTERPRISES (BID ID -3473111)
prasad constructions (BID ID -3473827)
DHEERU BUILDERS (BID ID -3473375)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
8331tender.pdf
Tender Documents • 1.22 MB
BOQ_824725.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .