REPAIR AND MAINTENANCE OF DG SET AND AMF PANEL AT AF STN JODHPUR

Amount

Material & Labour for comprehensive maintenance and general servicing of DG Set of capacity 15 KVA & upto 50 KVA , dismantling and replacement of worn out/Defective spare parts, tightening of nut bolts, checking of control wiring connections, cleaning of platform,removal of sludge from platform & also from inside of canopy of DG set including minor material like ; grease, thread, minor gaskets required for servicing etc and re-assembling of DG set, Installation on the same place, making connection , testing on full load complete to the entire satisfaction of the Engineer in Charge. Note : - (a) If any part will be replaced it will be measured and paid as supply only under respective items given here in after. (b) DG Sets are of the Makes :- Kirlosker/Birla Power/Volvo/TATA/ Mahindra/Crompton

Material & Labour for comprehensive maintenance and general servicing of DG Set of capacity 62.5 KVA & upto 100 KVA , dismantling and replacement of worn out/Defective spare parts, tightening of nut bolts, checking of control wiring connections, cleaning of platform,removal of sludge from platform & also from inside of canopy of DG set including minor material like ; grease, thread, minor gaskets required for servicing etc and re-assembling of DG set, Installation on the same place, making connection , testing on full load complete to the entire satisfaction of the Engineer in Charge. Note : - (a) If any part will be replaced it will be measured and paid as supply only under respective items given here in after. (b) DG Sets are of the Makes :- Kirlosker/Birla Power/Volvo/TATA/ Mahindra/Crompton

Material & Labour for comprehensive maintenance and general servicing of DG Set of capacity 110 KVA & upto 160 KVA , dismantling and replacement of worn out/Defective spare parts, tightening of nut bolts, checking of control wiring connections, cleaning of platform,removal of sludge from platform & also from inside of canopy of DG set including minor material like ; grease, thread, minor gaskets required for servicing etc and re-assembling of DG set, Installation on the same place, making connection , testing on full load complete to the entire satisfaction of the Engineer in Charge. Note : - (a) If any part will be replaced it will be measured and paid as supply only under respective items given here in after. (b) DG Sets are of the Makes :- Kirlosker/Birla Power/Volvo/TATA/ Mahindra/Crompton

Material & Labour for comprehensive maintenance and general servicing of DG Set of capacity beyond 160 KVA & upto 250 KVA , dismantling and replacement of worn out/Defective spare parts, tightening of nut bolts, checking of control wiring connections, cleaning of platform,removal of sludge from platform & also from inside of canopy of DG set including minor material like ; grease, thread, minor gaskets required for servicing etc and re-assembling of DG set, Installation on the same place, making connection , testing on full load complete to the entire satisfaction of the Engineer in Charge. Note : - (a) If any part will be replaced it will be measured and paid as supply only under respective items given here in after. (b) DG Sets are of the Makes :- Kirlosker/Birla Power/Volvo/TATA/ Mahindra/Crompton

Material & Labour for comprehensive maintenance and general servicing of DG Set of capacity beyond 250 KVA & upto 400 KVA , dismantling and replacement of worn out/Defective spare parts, tightening of nut bolts, checking of control wiring connections, cleaning of platform,removal of sludge from platform & also from inside of canopy of DG set including minor material like ; grease, thread, minor gaskets required for servicing etc and re-assembling of DG set, Installation on the same place, making connection , testing on full load complete to the entire satisfaction of the Engineer in Charge. Note : - (a) If any part will be replaced it will be measured and paid as supply only under respective items given here in after. (b) DG Sets are of the Makes :- Kirlosker/Birla Power/Volvo/TATA/ Mahindra/Crompton

Supply only Premixed coolant complete all as specified and directed by the Engineer-in-Charge. Make :- Volvoline, Koel, Fleetguard, Castrol, Bosch & Servo.

Supply only engine oil, multi grade 15w40 in engine complete all as specified and directed by the Engineer-in-Charge. Make :- Indian oil/ Hindustan Petrolium/ Castrol / Pride /Servo

Supply only diesel filter suitable for DG set of capacity 15 KVA and upto 50 KVA. Make :- Mico, Bosch, Kirloskar, Fleetguard, TATA, Cummins & Crompton Greaves.

Supply only diesel filter suitable for DG set of capacity 62.5 KVA and upto 100 KVA. Make :- Mico, Bosch, Kirloskar, Fleetguard, TATA, Cummins & Crompton Greaves.

Supply only diesel filter suitable for DG set of capacity 110 KVA and upto 160 KVA. Make :- Mico, Bosch, Kirloskar, Fleetguard, TATA, Cummins & Crompton Greaves.

Supply only diesel filter suitable for DG set of capacity above 160 KVA and upto 250 KVA. Make :- Mico, Bosch, Kirloskar, Fleetguard, TATA, Cummins & Crompton Greaves.

Supply only diesel filter suitable for DG set of capacity above 250 KVA and upto 400 KVA. Make :- Mico, Bosch, Kirloskar, Fleetguard, TATA, Cummins & Crompton Greaves.

Supply only Diesel filter suitable for 250 KVA Volvoline DG set.

Supply only Engine oil filter suitable for DG sets of capacity 15 KVA and upto 50 KVA complete. Make :- Mico, Bosch, Kirloskar, Fleetguard, TATA, Cummins & Crompton Greaves.

Supply only Engine oil filter suitable for DG sets of capacity 62.5 KVA and upto 100 KVA complete. Make :- Mico, Bosch, Kirloskar, Fleetguard, TATA, Cummins & Crompton Greaves.

Supply only Engine oil filter suitable for DG sets of capacity 110 KVA and upto 160 KVA complete. Make :- Mico, Bosch, Kirloskar, Fleetguard, TATA, Cummins & Crompton Greaves.

Supply only Engine oil filter suitable for DG sets of capacity above 160 KVA and upto 250 KVA complete. Make :- Mico, Bosch, Kirloskar, Fleetguard, TATA, Cummins & Crompton Greaves.

Supply only Engine oil filter suitable for DG sets of capacity above 250 KVA and upto 400 KVA complete. Make :- Mico, Bosch, Kirloskar, Fleetguard, TATA, Cummins & Crompton Greaves.

Supply only in Engine oil filter suitable for 250 KVA Volvoline DG set.

Supply and fixing in repairs all type of hose pipe, over flow pipe, copper tube fuel supply pipe, etc with clip and complete fittings of original make as per existing in the DG set Complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs BATTERY 12 Volt 180 AH capacity Complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs BATTERY 12 Volt 150 AH capacity Complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs BATTERY 12 Volt 100 AH capacity Complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs MCCB 400 Amp, 36 KA 4 pole 415 V including spreader links complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs MCCB 250 Amp, 36 KA 4 pole 415 V including spreader links complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs MCCB 200 Amp, 36 KA 4 pole 415 V including spreader links complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs MCCB 160 Amp, 36 KA 4 pole 415 V including spreader links complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs MCCB 125 Amp, 16 KA 4 pole 415 V including spreader links complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs Four Pole Contactor of capacity 100 Amps, 240 Volt AC, 2 NO+NC, or 01 NO NC Complete all as specified and directed by the Engineer-in-Charge .

Supply & Fixing in repairs Four Pole Contactor of capacity 200 Amps, 240 Volt AC, 2 NO+NC, or 01 NO NC Complete all as specified and directed by the Engineer-in-Charge .

Supply & Fixing in repairs Four Pole Contactor of capacity 160 Amps, 240 Volt AC, 2 NO+NC, or 01 NO NC Complete all as specified and directed by the Engineer-in-Charge .

Supply & Fixing in repairs Four Pole Contactor of capacity 250 Amps, 240 Volt AC, 2 NO+NC, or 01 NO NC Complete all as specified and directed by the Engineer-in-Charge .

Supply & Fixing in repairs Four Pole Contactor of capacity 300 Amps, 240 Volt AC, 2 NO+NC, or 01 NO NC Complete all as specified and directed by the Engineer-in-Charge .

Supply & Fixing in repairs Four Pole Contactor coil of capacity 100 Amps 240 Volt AC Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs Four Pole Contactor coil of capacity 200 Amps 240 Volt AC Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs Four Pole Contactor coil of capacity 160 Amps 240 Volt AC Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs Four Pole Contactor coil of capacity 400 Amps 240 Volt AC Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs Four Pole Contactor coil of capacity 250 Amps 240 Volt AC Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs Autocut Electrical Battery Charger Unit 12V DC, 10 Amp SMPS with Constant Voltage Output with Battery Charging Transformer and Moulded Type Rectifier Unit etc. Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs Autocut Electrical Battery Charger Unit 24V DC, 10 Amp SMPS with Constant Voltage Output with Battery Charging Transformer and Moulded Type Rectifier Unit etc. Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs under Voltage Monitor Relay, 3 Phase AC, 110/415V, AC Setting 75-100/300-400V, Trip Time 0-10 Sec Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs indicating lamp set RYB for phase indication operating 240 volt 50 HZ AC with new one LED panel mounting type complete to match with existing one Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs Timer AC/DC on Delay, AC 110/220V AC DC 24/12, 1-10, 3-30, 10-100 Sec Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs Engine Start Relay, 12/24 V DC, For Gensets 3 Cranks No & Off 0-30 Sec Each Setable complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs Copper Conductor Control Cable of 6 core, sectional area 1.5 Sqmm (each core) Multistranded for DG Set to AMF Panel Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs of DC 12V Self Solenoid Coil (4 ST Switch) suitable for DG Set of any capacity of make as per orginal existing in DG set Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs of DC 24V Self Solenoid Coil (4 ST Switch) suitable for DG Set of any capacity of make as orginal existing in DG set Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs Microprocessor/Alfa-Numeric Based DG Set PLC for DG set (PS 500 unit for CUMMINS) Complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in repairs Microprocessor/Alfa-Numeric Based DG set PLC for DG set (PLC FOR Mahindra/ Ashok Leyland DG SETS) Complete all as specified and directed by the Engineer-in-Charge.

Material and labour for repair/overhauling of self starter upto 125 KVA 12 Volts of make : Lucas, including replacement of carbon brusses, bearing, bushes, rewinding of armature and field etc. and warnishing Complete all as specified and directed by the Engineer-in-Charge .

Supply and fixing in repairs Oil Pressure switch 2 Pin or 3 Pin of original make as per existing for engine complete all as specified and directed by the Engineer-in-Charge .

Supply and fixing in repairs Battery terminal made of Brass of original make as per existing complete all as specified and directed by the Engineer-in-Charge

Supply and fixing in repairs Battery Led of original make as per existing complete all as specified and directed by the Engineer-in-Charge .

Supply and fixing in repairs Fan Belt of original make as per existing complete all as specified and directed by the Engineer-in-Charge .

Supply & fixing in repairs AMF Controller (PROCOM UNIT) for AMF Panel for 12V and 24 V both supply Complete all as specified and directed.

Supply & fixing in repairs Auxiliary Relay 14/11/8 Pin 230V AC relays, suitable for AMF Panel of DG Set Complete all as specified and directed.

Supply & fixing in repairs Auxiliary Relay 14/11/8 Pin 12/24 volts DC relays, suitable for AMF Panel of DG Set Complete all as specified and directed.

Supply & Fixing in repairs DC 12 V fuel Solenoid Coil left/right suitable for DG Set of make Cummins Complete all as specified and directed.

Supply & Fixing in repairs DC 24 V fuel Solenoid Coil left/right suitable for DG Set of make Cummins Complete all as specified and directed.

Supply & Fixing in repairs relay card suitable for AMF panel of Make Procom, 12/24 V Complete all as specified and directed.

Material and labour for repair/overhauling of self starter above 125 KVA and upto 400 KVA, 24 Volts of make : Lucas, including replacement of carbon brusses, bearing, bushes, rewinding of armature and field etc. and warnishing Complete all as specified and directed by the Engineer-in-Charge .

Supply and fixing in repairs control MCB 6 Amp single pole C curve type Complete all as specified and directed by the Engineer-in-Charge.

Material & labour for replacement of DG set self of 12 Volts capacity suitable for DG set upto 125 KVA of make Lucas, Bosch complete all as specified and directed.

Material and Labour for inspection of DG Set as required including checking of engine oil, coolant, fuel and battery termincals on priority basis complete all as specified and directed by the Engineer-in-Charge.

Supply & Fixing in replacement of liner of suitable size of original make as per existing in the canopy type DG Set of capacity 62.5 KVA 415 volts 50 HZ of Make : CG Complete all as specified and directed.

Supply & Fixing in replacement of piston of suitable size of original make as per existing in the canopy type DG Set of capacity 62.5 KVA 415 volts 50 HZ of Make : CG Complete all as specified and directed.

Supply & Fixing in replacement of piston ring of suitable size of original make as per existing in the canopy type DG Set of capacity 62.5 KVA 415 volts 50 HZ of Make : CG Complete all as specified and directed.

Supply & Fixing in replacement of engine gas kit, O ring of suitable size of original make as per existing in the canopy type DG Set of capacity 62.5 KVA 415 volts 50 HZ of Make : CG Complete all as specified and directed.

Supply & Fixing in replacement of CR bearing of suitable size of original make as existing in the canopy type DG Set of capacity 62.5 KVA 415 volts 50 HZ of Make ; CG Complete all as specified and directed.

Material & labour for repair, maintenance and overhauling of the canopy type DG Set of capacity 62.5 KVA 415 volts 50 HZ of Make- CG including repair of engine head with accessories and repair to inlet, outlet valve and all machinery work including electrical connections and testing upto the entire satisfaction of Engineer-in-charge complete all as specified and directed.

Material and Labour for dismantling existing DG set of capacity upto 125 KVA properly disconnecting all electrical connections, panels and DG set, shifting to other location taking suitable safety measures while handling and shifting of DG set from current location to proposed location (within perimeter of Technical area) including transportaion, including required foundation for panels and DG set as per standard norms, reconnection, testing and commisioning complete all as specified and directed by the Engineer-in-Charge.

Supply & fixing in replacement of flywheel ring as per existing suitable for DG set upto 160 KVA complete all as specified and directed.

Material and labour for top up of battery distilled water used for lead acid battery complete all as specified and directed.

Material and Labour for dismantling the radiator and fan from the engine of DG set of capacity upto 400 KVA for cleaning of copper tubes and cooling fins by using descaling solution and soldering, patch work ; including necessary transporting for repair to workshop, bringing back including successful re-installation complete all as specified and directed by the Engineer-in-Charge.

Nvimal Engineers and Contractor