Tender for Supply of equipment / material , design, erection, testing commissioning for SOP to IPH Deptt.for C/O T/Well at Village Indpur Tanda by Prov. 11/.4 KV 63 KVA S/Stn. a/w 11 KV HT line section Indpur under ESD Indora ED Fatehpur

Amount

63 KVA S/Stn

11/.4 KV 63 KVA DTR (REC Sep. ord 11/1976

Prov. ST Pole Pole 9 Mtr. Long W/L 200 Kgs

Muff for steel tubular pole with concrete filling

X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for incomer line

MS A.I.(50X50x6 mm), Length: 2800 mm x(1 Nos for LA's )

X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch

Transformer Bed, Belting & Knee Bracing-X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for transformer bed

Transformer Bed, Belting & Knee Bracing-X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer]

Transformer Bed, Belting & Knee Bracing- MS A.I.(50X50x6 mm), Length: (2800 mm) x 2 No.

Transformer Bed, Belting & Knee Bracing-MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos

Transformer Bed, Belting & Knee Bracing-MS A.I.(50X50x6 mm), Length: (950 mm) x 2 Nos. of bed knee bracing

Transformer LT Diostribution Box and G.O switch fixing assembly-MS Angle Iron (50X50x6 mm), Length : (2800 mm) x2 Nos

Transformer LT Diostribution Box and G.O switch fixing assembly-MS Angle Iron (50X50x6 mm), Length : (450 mm)x1 Nos

Transformer LT Diostribution Box and G.O switch fixing assembly- G.O. Switch handle supporting: [C.I. (75x40x6mm), length: 460mm

G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type

D.O Fuse unit

Surge Arrester, 9 kV Station Class

Discs insulator sets (comp. 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) i/c Dead End Clamps etc.)

Stay set complete

Stay wire (7/3.15mm)( 7 Kg per stay set)

Pipe earthing with GI,Charcoal & Salt

Prov. LT distribution panel with MCCB (100 A, 10 KA, 4P,1 No.) & SFU (32 A 5 No. rewireble) for 63KVA Trf. as per specification

Half clamp (M.S. Flat 50x6)

Full clamps (M.S. Flat 50x6)

M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer)

Aluminium Thimbles

Copper Thimble

Danger Plate

Barbed wire (REC Sp F 3/1981)

LT Cable 3-1/2 core-120mm sq.

Alluminium Paint

Prov.ACSR, 6/1/3.35 mm

Prov. Transformer structure protection plinth(Civil Work As per HPSR) for 63KVA S/Stn

11 kV HT Line

AAAC 7/3.15 (55mm²) {Includes 3 conductor lengths for 3Φ and Additional 1% (Sag, Jumpering and wastage}

Prov. Steel tubular poles. 9mtrs

Muff for steel tubular pole (2000mm long) with concrete filling

Run Through structure (Formation Tringle) single pole Str.-Cross Arm: [Channel Iron (100x50x6 mm), Length 1270 mm (i/c tolerence of 100mm either side) x4 structure

Run Through structure (Formation Tringle) single pole Str.-Angle Iron (50x50x5 mm), Length (2x750) mm x 1 structures

Run Through structure (Formation Tringle) single pole Str.-Pole Top Bracket [MSCI:100x50x6mm-100mm]

Run Through structure (Formation Tringle) single pole Str.-11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure

Dead End Structures: (Adopt three (3) No. per Km) on Double Pole -Belt Set - MS Angle Iron: 50x50x6, Length [1800 mm x 2 No.]

Dead End Structures: (Adopt three (3) No. per Km) on Double Pole -X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mm x2 No.]

Dead End Structures: (Adopt three (3) No. per Km) on Double Pole -X-Arm(Horizental) - MS C. Iron: 50x50x6, Length [2340 mm x2 No.]Formation Tringle

Dead End Structures: (Adopt three (3) No. per Km) on Double Pole -Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)

Dead End Structures: (Adopt three (3) No. per Km) on Double Pole -11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure

HT Stay / Guy Arrangement-Stay set complete in all respect ( Single Pole-1No. , /D. Pole Structures-4Nos.)

HT Stay / Guy Arrangement-Stay Wire (7/3.15 mm) (9.0 kg Per Stay Set)

Earthing HT line-HT earthing set complete (REC Constr. Standared J-1)

Earthing HT line-Single Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m

Earthing HT line-Cross lacing (G.I. 8SWG) [2.2Mx9Nos@2M spacing] {0.102kg/M

Earthing HT line-Eye Hook for earth wire

Earthing HT line-Earth Wire Clamp

Earthing HT line-MS Chanel Iron 75x40x6mm, length: 2400mm for road crossing

Half clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.)

Full clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.)

Danger Plate (250X200X1.6 mm)

M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer)

Barbed wire (REC Sp F 3/1981)

G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type

D.O Fuse unit

Alluminium Paint

SHYAM SINGH

KANISHKA ELECTRICALS

BIRESHWAR SING

SANJEEV KUMAR KALIA