Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.9 LAccepted-AOC 2 GA 29 HOUSING BOARD MANU MARG ALWAR 301001 | ALWAR | RAJASTHAN | 301001 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹30.7 L+₹8.5 L (38.5%)Rejected-Finance SHYAM BHAWAN OPP BANK OF INDIA CHOPASNI ROAD JODHPUR 342003 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342003 | L2 | Rejected-Finance HIGHEST | |
| 3 | L3₹31.4 L+₹9.2 L (41.5%)Rejected-Finance | L3 | Rejected-Finance HIGHEST | |
| 4 | Rejected-Technical | - | Rejected-Technical Not recommended due to following reasons (i) Complete enlistment letter not uploaded (ii) Address of firm in GST form is not matching with address in letter pad. |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
14 Nov 2020, 6:00 pmClosed
SHRI T C SHISHODIYA, DCWE (C)
MULTAN LINE ARMY AREA JODHPUR
Repair to Wooden Furniture at Army area Jodhpur
2020_MES_385035_1
CWE (A) JODH-90 OF 2020-21
Open Tender
Civil Works
Item Rate
150 days
GE (Army) Central
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
Yes
GE (Army) Central
₹70,000
Yes
13 Jan 2021
9 Oct 2020
16 Nov 2020
9 Oct 2020
14 Nov 2020
30 Oct 2020
Amount
Chair Dining FD-228, 279 (a) Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(b) Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(c) Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(d) Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(e) Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(f) Taking down old u/s Back Strip and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(g) S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
(h) M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge.
(j) Re-canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.
Chair Writing FD-202,250,280 (a) Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(b) Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(c) Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(d) Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(e) Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(f) Taking down old u/s Back Strip and M&L for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(g) S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
(h) M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge.
(j) Re- canning of Chair Writing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.
(k) Taking down old u/s Arms Rest and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Chair Easy FD-229,201 (a) Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(b) Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(c) Taking down old u/s Side Rails of Seat and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(d) Taking down old u/s Front Rail of Seat and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(e) Taking down old u/s Side Rail of Back and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(f) Taking down old u/s Top/Bottom of Back and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(g) Taking down old u/s Front Support Rail and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(h) M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge
(j ) Re- canning of Chair CBA Wooden in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.
(k) Taking down old u/s Arms Rest and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Chair Dining Officer FD/MAP-ll/05 (a) Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(b) Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(c) Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(d) Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(e) Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(f) Taking down old u/s Back Strip and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(g) S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
(h) M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge
(j) Removel of old cushion and Supply and fixing of new seat cusion of 75 mm thick 40 density complete with approved tepestry. Rate of tapestry should not be less than Rs 350/- per RM. Rest all as shown on drawing and as directed by the Engr - in - Charge.
Bed Hard/Bed Newar FD-246 (a) M&L shall be provided for replacement of worn out plywood top from Bed Hard/Bed Newar, S&F New Plywood top of 12 mm thick commercial, BWR grade ,ISI Marked confirming to IS-303 Make : Greenply/Archidply/Century in one piece, fixed with suitable screws complete, all as specified on drg and as directed by Engr-in-Charge.
(b) M &L for replacement of old broken long Rail made out of II nd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM Rest all as per drg.
(c) Making out short Rail from old broken long rail (obtain from Item No 5 (b) here-in-before) and fix rest all as per drg.
(d) M &L for replacement of old broken legs made out of II nd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM Rest all as per drg.
(e) M & L for taking out all broken worn out component of head board and provide frame with IInd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM and Teak face ply one side and other side commercial ply BWR ISI Marked grade all as per drg.and as directed.
(f) M & L for taking out all broken worn out component of head board and provide frame with IInd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM and Teak face ply one side and other side commercial ply BWR ISI Marked grade all as per drg.and as directed.
(g) M & L for replacement of old broken stiffener connecting of legs with new one made out teak wood., Rest all as per Drg.
(h) S &F MS clamp made out mild steel flat iron size 35 mm x 5 mm including 2 coats of synthetic enemel paint over a coat of redoxide primer.
Chair WBB FD-56/285 (a) Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(b) Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(c) Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(d) Taking down old u/s Seat Frame and M&L for New Seat Frame made out of 6mm thick commercial Plywood ISI Marked complete. All as specified in drg and as directed by Engr-in-Charge.
(e) Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(f) Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(g) M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
SOFA SET 4 SEATER FD-373 (a) Taking down old U/S front/ rear leg of sofa set 4 seater and S& F new front/ Rear leg of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
(b) Taking down old U/S Side back/Front Rail of sofa set 4 seater and S& F new Side back/Front Rail of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.
(c) Taking down old U/S batterns for seat/back of sofa set 4 seater and S& F new batterns for seat/back of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge.
(d) Taking down old U/S front/ Arms of sofa set 4 seater and S& F new Arms of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
(e) Removing of existing U/S cushion from seat of sofa set 4 seater and S & F new foam cushion 100 mm thick 32 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
(f) All as per item No 58 here-in-above but Cushion for Back.
(g) M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
(h) Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and S&F New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
SOFA SET 5 SEATER FD-373 (a) Taking down old U/S front/ rear leg of sofa set 5 seater and S& F new front/ Rear leg of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge.
(b) Taking down old U/S Side back/Front Rail of sofa set 5 seater and S& F new Side back/Front Rail of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.
(c) Taking down old U/S batterns for seat/back of sofa set 5 seater and S& F new batterns for seat/back of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge.
(d) Taking down old U/S front/ Arms of sofa set 5 seater and S& F new Arms of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
(e) Removing of existing U/S cushion from seat of sofa set 5 seater and S & F new foam cushion 95 to 100 mm thick 32 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
(f) All as per item No 66 here-in-above but Cushion for Back.
(g) M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
(h) Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and S&F New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
Material and Labour for polishing of furniture including scrapping of rough surface and old worn out polished layer with scrapper /sand paper for smoothing the surface and polishing the same with of approved quality french polish to glossy finish. The items are mentioned below :- (a) Chair Dining FD-279/203/16/262
(b) Chair Writing FD/20/202/250/280
(d) Chair Easy FD-229/201/17
(e) Chair dining officer
(e) Chair WBB FD-26/225/285
(f) Bed Hard FD-246/245/247
(g) Sofa Set 4 Seater FD-281
(h) Sofa Set 5 Seater FD-281
Shri Maruti Trading Co.
L.BHIMSEN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .