PROVISION OF COVERED PARKING SHED FOR NCN BLDG, SPECIAL REPAIRS TO D-2 BLDG AND ADDN/ALTN TO WASHROOMS AND HAND RAILS AT BLDG NOS P-128 AND 202 AT NAVAL BASE KOCHI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish out of defence land etc complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tk screed bed of CM 1:6 all as specified and as directed.

M&L for glazed coloured ceramic tiles in vertical surfaces 300x200x7 mm thick in vertical surface set and joint in neat cement slurry and pointed in white cement or coloured cement to match the shade including 10 mm thick rendering CM 1:4 all as specified and as directed.

Taking down cement plaster on brick/ concrete walls incl raking out joints, hacking for key, srubbing down with water etc as specified and as directed.

M&L for cement plaster 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement for internal faces of walls complete all as specified and directed.

M & L for preparation new wall surfaces and applying one coat of chalk whiting on new plaster surfaces, preparatory to distempering & applying two coats of distemper oil emulsion white or tinted all as specified and directed .

Taking down Chowkhats or frames exc. 1.5 Sqm but not exe.4 Sqm each, with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Demolition of brickwork/stone/boulder built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, Type C1 (1:3:6) (using 20mm graded aggregate), exc. 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

S&F Powder coated anodised aluminium frame for door/window with or more rebates including joining cleat for fixing etc. complete all as specified. Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD

S & F Powder coated anodised aluminium window/ventilator shutters side hung type without sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, screws, aanodised aluminum fitting such as peg stays 150 mm long (1 no.), Stainless steel frictional hinges , tower bolt 100mm(2 Nos), suitable handle (1 no.) as specified. Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD

S&F aluminium anodised DECO grill 10mm thk,DG-104 fixed with necessery U/F/H channel etc complete all as directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beeding in squares exceeding 0.5 sqm each pane fix to wood/aluminium joinery complete all as specified and directed. Make: Hindustan Pilkinton glass Works Ltd/ Modiguard.

S&FAluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples and including II nd class hard wood/aluminium beads straight (any size) for glazed or gauged joinery , renewed including mitrted etc complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, & fixing in opening as per specification etc complete all as specified and as directed.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, & fixing in frame at site as per specification all as specified and as directed.

S&F extruded aluminium alloy handle 150 mm fabricated type anodised all as specified and as directed.

S & F Butt hinges Stainless Steel 100mm all as specified and as directed.

M&L for 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 16mm outer dia 3-layer PP-R (Polypropylene random co polymer) pipes SDR 7.4 & concealed pipes SDR 7.4 (PN 16) UV stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors including taking down old pipe etc complete all as specified and as directed.

All as per item No:21 above but 20mm dia pipe.

S & F in repair 15mm, 2 way Bib cock with wall flange CP brass fancy type etc complete all as specified and as directed.

S & F in repair 15mm, Angular Stop Cock with Wall Flange CP brass fancy type etc complete all as specified and as directed.

S & F in repair 15mm, Overhead Shower 105mm dia,Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System fancy type etc complete all as specified and as directed.

S & F in repair 15mm, Shower Arm Casted 190mm Long Light Body Round Shape for Wall Mounted Showers with Flange fancy type etc complete all as specified and as directed.

S & F in repair 15mm, Hand Shower (Health Faucet) (ABS Body) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook fancy type etc complete all as specified and as directed. Make - Jaguar Cat No-ALD-CHR-585 or Equal to Parriware, CERA, etc

S & F in repair Single piece-WCwith UF soft close seat cover, Fixing Accessories Set and Accessories Set, Cistern fittings, Size: 365 x 655 x 760mm, S Trap-220mm complete all as specified and directed Make - Jaguar Cat No-LYS-WHT-38853S or Equal to Parriware, Cera .

S & F in repair Wall Hung Basin with Full Pedestal and Fixing Accessories,Size : 600 x 490 x 175mm complete all as specified and directed Make - Jaguar Cat No-LYS-WHT-38801 or Equal to Parriware, CERA

Supply and fix in repair Pillar cock 15mm bore, fancy type complete all as specified and directed Make - Jaguar Cat No-KUP-35001PM or Equal to Parriware, CERA, etc

S & F in repair soap dish complete all as specified and directed Make - Jaguar Cat No-AKP-35731P or Equal to Parriware, CERA

S & F in repair 600mm long Towel Rack with 3 towel hanging hooks complete all as specified and directed Make - Jaguar Cat No-ACN-1181FHN or Equal to Parriware, kohlar

S & F in repair 15mm, Single Lever Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges fancy type complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75 mm plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm dia single socketed in any length , with rubber rings complete all as specified and directed.

S&F in repair PVC (SWR) bends 75 mm dia single socketed in any length , with rubber rings complete all as specified and directed.

S&F in repair PVC (SWR) bends 110 mm dia single socketed in any length , with rubber rings complete all as specified and directed.

M&L for preparation and complete removal of existing treatment and applying two coats of Interior Emulsion (Asian Rayale interior enulsion) over a coat of primer and 3mm thick wall care putty complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F aluminium snap grid false ceiling frame work of angle 25 x25 x 2mm Main TEE 38 x 25 x 1.5mm and cross TEE 25 x 25 x 1.4mm for any height of bldg, Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners12.5mm dia. 40mm long , 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and as directed .

M&L for preparation of new surfaces (Ceiling) applying two coat of oil bound distemper over one coat of primer complete all as specified and directed.

Dismantling single layer MP roofing tiles including ridges complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital or similar pattern roof covering complete all as specified and as directed. .

Dismantling timber scantlings under 40 sqcm in section in fillets, rails, posts, rafters, purlins etc, in unframed works complete all as specified and as directed.

All as per Item No. 47 above but over 40 Sqcm in section.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

Dismantling battens for tiles, shingles etc spaced exc 15cm of any size incl tilting fillets complete all as specified and as directed.

M & L mangalore pattern roof tiles, interlocking at side joints, laid dry complete all as specified and as directed.

M & L ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6, complete all as specified and as directed.

M & L 2nd class HW sectional area exc 5 & n.exc 15 sqcm clean sawn battens at 30 cm centres for mangalore tiles complete all as specified and as directed.

M & L two coats of creosoting to tiles battens any size and spacing prepared and treated all over (measured overall on oneside only, spaces not deducted) complete all as specified and as directed.

S & F 2nd class hard wood scantlings clean sawn 40 sqcm and over in section in unframed work complete all as specified and as directed.

M & L 2nd class HW plain fillets square or rectangular in section clean sawn, secured with nails, but bullnosed, splayed, chamfered or rounded on one edge or face area exc. 13 and n.exc 25 Sqcm, complete all as specified and as directed.

S & F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with L-hook or cranked bolts complete all as specified and as directed.

M & L 2nd class hard wood weather boarding, clean sawn, plain, 20mm thick or feather edged 20mm complete all as specified and as directed.

S&F in repairs. half round PVC eaves gutters 150 mm dia with union sockets and joints set in approved jointing compound incl iron brackets for fixing complete all as specified and as directed. .

S&F PVC rain water pipes 110mm dia including bend, elbow, iron brackets for fixing etc complete all as specified

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified

Taking down Chowkhats or frames n exc. 1.5 Sqm each, but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

M&L for18mm thick Multiwood modular kitchen cabinets, inside depth not less than 0.50M , water proof, termite & Borer proof, corrosion free with melamine polished shutter and auto soft closer, counter sunk hinges, stainless steel handles ( buff finished) complete all as directed . ( Note :(i)Thefront facing area of cabinet shall only be measured for payment. (ii) The labour charges for fixing Stainless steel baskets catered under under Sl. item No.64 of BoQ shall be deemed to be included in the unit rate quoted against this item. (iii) Stainless steel hinges,180 degree 304 grade shall be of make Hettich /Ebco/Sleek/Germo.

Supply only a set of stainless steel baskets with fittings as in modular kitchen cabinet as per following details :- (i) Plate basket 21"x19"x8" - 01 No (ii) Plane basket 21"x19"x8" - 01 No. (iii) Plane basket 17"x19"x8" - 01 No. (iv) Butlery basket 17"x19"x4" - 01 No. (v) Cup & Saucer basket 17"x19"x4" - 01 No. (vi) Single pull out 8" - 01 No. (vii) GT- PT & Drip tray 22" - 01 No. (viii) Telescopic channels of appropriate size - 06 Nos. ( Make : First quality of Sleek/ Ebco/ Dolin) all as specified and as directed.

Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise, with superficial area exc 500 sq.cm but n.exc 0.1 Sqm and upto a depth of 40 cm complete all as specified and as directed.

M&L precast cement concrete solid building blocks or slabs, type C-1,1:3:6 mix ( using 20mm graded aggregate ), 10cm thick ( with plain or interlocking joints as directed) setting in cement mortar 1:4 complete all as specified and directed.

M&L cement Plaser in two coats 8mm thick in CM 1:4 over 12mm thick in CM (1:6) on external surfaces is to be finished even smooth with out using extra cement complete all as specified and as directed.

M&L preparation of newly plastered surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles, locking arrangement etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

Preparation of new steel surface of any description or 10cm width or girth and applying 2 coat of aluminium paint over a coat of aluminium primer complete all as specified and as directed.

S&F stainless pipe of 304 grade 65mm dia with wall thickness not less than2.11mm as in post support ectc errected in position complete all as specified and as directed.

S&F stainless pipe of 304 grade 20mm dia with wall thickness not less than2.11mm as in framed grid work including S/S seamless welding to SS framed, Plate and SS poll all as directed

S&F stainless pipe of 304 grade ornamental type cap suitable for coupling head 65mm dia S/S pipe including S/S tack seamless welding to Sspole all as directed.

Supply, providing and fixing suspended false ceiling consisting of 8mm thick calcium silicate seamless board suspended on GI framework with staggered joints, GI framework to consist GI perimeter channel 25mmX20mm of 22 gauge along perimeter of false ceiling. Channel section of 50X25mm of 22 gauge and at 300mm centre to centre throghout one way fixed with screw/nut bolt and other direction 40x15 mm 22 gauge channel provided with interlocking with GI cleat and expansion fastnors including hangers 6mm dia GI fixed to roof truss, Boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the gypsm board with joining compound paper tape and two coat plasting emulsion paint over one coat of primer and one layer of putty 3mm thick in three layers suitable for calcium silicate board( as per the recommendations/ practice) ncluding necessary scaf folding and shuttering complete as directed as specified and directed by Engr-in-Charge.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying three coat of white wash complete all as specified and directed.

M&L for preparation new plastered external surfaces and application of one coat of primer and allowed to dry overnight before applying first coat of acrylic exterior emulsion complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of acrylic exterior emulsion paint ( Asian paint apex ultima proteck or equivalent of Berger /Nerolac )on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.

M&L for application of second coat of acrylic exterior emulsion paint ( Asian paint apex ultima proteck or equivalent of Berger /Nerolac ) on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface complete all as specified and as directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified

M & L for reinforcement cement concrete Type B1 1:2:4 (20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete in all as specified

S&F mild steel TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending spirally or hooping for column, hooking ends ad binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and directed .

S&F mild steel TMT bars 5mm dia and over up to 10mm dia as in stirrups,spacers and binders, cut to length, bend to shape required including cranking, bending spirally or hooping for column, hooking ends ad binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed .

S&F in repairs bib tap fancy type chromium plated 15mm dia including GI nipple and socket complete all as specified and directed . Make-Parry ware (Cat No-C0204A1) or equivalent of CERA/Kohler

S&F in repair water closet pedestal vitreous china white pattern (EWC) including white colour seat cover and connection to drain and to flush pipe & fixing bolts etc complete all as specified and as directed . Make-Parry ware (Cat No-C847H White colour) or equivalent of CERA/Kohler

S & F in repair towel rail stainless steel 60cm length complete all as specified and directed Make-Parry ware (Cat No - T6008A1) or equivalent of CERA/Kohler etc complete all as specified

S&F of Counter Top Basin (Self- Rimming) for hand wash white flat back of size 550X 445mm (Parryware Leeds, CAT No. C0431 Counter Top) fixed or laid on granite platform including necessary fitting complete all as specified and as directed as in repairs. Make-Parryware /CERA/Kohler

S&F in repair Pillar cock fancy type brass CP coated complete all as specified and as directed . Make-Parryware, CAT No.-G2020A1GF or equivalent of CERA/Kohler

S&F in repair Angle valve fancy type brass CP coated complete all as specified and as directed . Make-Parryware, CAT No.-G0253A1 or equivalent of CERA/Kohler

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F 150mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S& F Powder coated anodised aluminium door shutters side hung type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, neoprene packing, screws, anodised aluminum fitting such as handles 2 Nos and 4 Nos hinges in each shutter, tower bolt 150mm long two nos, etc complete all as specified and as directed. Make-Jindal or equilvent

Returning, filling in including spreading, levelling, watering and well ramming in layers in soil complete all as specified and as directed.

Removing excavated material exc 200m and n.exc 250m and depositing where directed at a level n.exc 1.5m above starting point complete all as specified and as directed.

M&L plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregates coping including necessary form work complete all as specified and as directed.

S&F framed work such as MS grill with 25x25x5mm thick angle iron, 10cm square bar horizontal and vertical with ends of bar shouldered and riveted or forged into spikes, framed guard bars etc conforming to Fe 290, Gde-E-165. complete all as specified and as directed.

M&L rendering 15 mm thick on brick or concrete surface in cement mortar 1:4, finished even and smooth complete all as specified and as directed.

Extra for forming of fair finished drain or channel having 30cm inner girth in cement concrete complete all as specified and as directed.

M & L for precast cement concrete cover slab for man hole, type B-1 (1:2:4) using 20 mm graded stone aggregate set in cement mortar 1:6, including necessary formwork etc complete all as specified and as directed. (Reinforcement shall be measured and paid seperately)

S&F Fiber glass reinforced plastic (FRP) door frame of cross section 90 mmx45 mm having single rebate of 32 mm x15 mm to receive shutter of 30 mm thickness,the laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat, door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs,the frame shall be covered with fiber glass from all sides ,MS stays shall be provided at the bottom etc complete all as specified and as directed.

S&F 30mm thick Fibre glass reinforced plastic (FRP) panelled door shutter of required colour made with fire retardent grade unsatured polyster resin,moulded to 3mm thick FRP laminate for forming hollow rails and styles,with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS-14856, including fixing to frames,etc complete all as specified and as directed.

S&F framed work such as MS grill with 25x25x5mm thick angle iron, 10cm square bar horizontal and vertical with ends of bar shouldered and riveted or forged into spikes, framed guard bars etc conforming to Fe 290, Gde-E-165. complete all as specified and as directed.

M&L rendering 15 mm thick on brick or concrete surface in cement mortar 1:4, finished even and smooth complete all as specified and as directed.

M & L for precast cement concrete cover slab for man hole, type B-1 (1:2:4) using 20 mm graded stone aggregate set in cement mortar 1:6, including necessary formwork etc complete all as specified and as directed. (Reinforcement shall be measured and paid seperately)

S & F 6mm to 8mm dia TMT bars in reinforcement cut to length ,bent to shape required including cranking, bending hooking and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L 110 mm dia PVC (SWR) pipes single socketed, in any length, with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L concrete bed to drain pipes including packing under and haunching against the side of pipes after they are laid and tested in cement mortar all as specified. (Bore of pipes 150mm)

S&F Hume pipe septic tank 25 users capacity including necessary earth work in soft/ loose soil, PCC 1:3:6 in bed concrete with accessories like AC vent pipe, cowl, manhole cover etc including connecting to the sewer line complete all as shown in drg No.TD/A/57 sheet 1/1 and connected works complete all as specified and as directed by Engineer-in-Charge.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) bends single socketed in any length, with rubber rings complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends single socketed in any length, with rubber rings complete all as specified and as directed.

M&L plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade Yst-310 all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep and getting out in loose/soft soil all as specified and as directed.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed.

M&L for 100mm thick cement concrete type D2, 1:4:8(40mm graded stone aggregate) for sub base of floor all as specified and as directed .

M/L for coarse aggregate graded 12.5mm to 4.75mm and spreading and levelling in layers n exc. 25 cm thick as in cushion for paver block complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and pigment complete all as specified and directed.

S&F in repair 600 mm long shelf complete all as specified and directed. Make :- Jaquar Cat No. CAN-1171 N or equivalent to Parriware/CERA etc.

M&L for cement concrete 1:2:4, Type B0 using 12.5 mm graded stone aggregate for kerb as specified,including weathering, slightly rounded or chamfered angles and throating,all as specified and directed.

Albert Rebello and Company

Anaswara Constructions

M/s ANTONY THOMAS AND CO

Suprisons

K.V.GEORGE AND COMPANY

M/s Antony Kallarakkal

WELTRONENGINEERINGSERVICES