PyIP-Rectification of shutters in Main canal between chainage 15-200km and chainage 42-000km for the year 2021-2022

Amount

Dismantling and removing the existing 18 nos canal shutters

od45965/2020_2021/MH : :Dismantling of the Canal Shutter ( up to 2 Tonne weight ) /Hoist unit /Embedded parts etc.of the same and stacking at distance of 100m including hire of machinery labour etc. complete as direct by the departmental officer at the site (weight of unserviceable shutters and embedded parts may be calculated as 60% unservicable hoisting unit as 80%)

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Supply,Fabrication,erection of embedded parts for shutters

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od45969/2020_2021/MH : Fabrication and erection of Embedded parts for canal shutters ( up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of materialalready supplied

od45971/2020_2021/MH : Fabrication,Supply, erection and assembling in correct position and alignment by welding SSEmbedded parts in 304L Grade like roller track, seal track,seal seat etc as per approved specifications,drawings and directions of deptl officer at site including cost of all materials,labour,machinery forplaning, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Supply and fabrication for 11 nos canal shutters

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od45968/2020_2021/MH : Fabrication and supply of Structural steel canal shutters (Up to 2 tonne weight) /Hoisting Bridge /Plat form and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handlingcharges etc complete but excluding cost of material already supplied

od45973/2020_2021/MH : Supplying and fixing cast steel thrust roller assembly having 120mm Dia, 50mm tread width, SS(304) shaft 50mm dia, 120mm long and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete

od45977/2020_2021/MH : Supply of MS bolt and nuts

Supply and fixing rubber seals

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Supply of materials and fabrication of Hoist bridge ,Worm reducer,base & nut, screw rod

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od45963/2020_2021/MH : Supply of MS bolt and nuts

od5186/2021_2022/MH : Providing of worm and pinion having a lifting speed of around 5.00 cm/min for hand operation /manual operation including cost of all materials,labour ,hire charges and conveyance

od45964/2020_2021/MH : Providing base and nut arrangement for hoisting the shutter including cost of all materials labour and complete

od22101/2021_2022/MH : operating handle for base and nut , cost include cost of mateials ,making,suply,conveyance, labour etc

od5194/2021_2022/MH : Providing EN-8 Screw rod 7.5 tonne capacity 4.00m lift screw hoist having one number of EN-8 screw shaft having lifting speed of around 5cm /min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance

od5197/2021_2022/MH : Providing EN-8 Screw rod with one number of screw shaft ,hand operation including cost of all materials, labour, hire charges and conveyance

od45979/2020_2021/MH : Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Plat form and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handlingcharges etc complete but excluding cost of material already supplied

Overhualing the existing gear box/worm reducers

od5452/2021_2022/MH : Overhauling the Gear box of canal shutter - cleaning and greasing the gear wheels, changing the bushes ,damaged nut and bolts etc complete and re fixing.cost includes cost of all materials, labour charges,hire charges of tools etc.complete

Painting and erection of 11nos new shutters,7 no existing shutter,Hoist bridge and unit,etc.complete

od45961/2020_2021/MH : :Erection of the Canal shutter (Up to 2 tonnes weight)/Hoist Bridge /Platformincluding handrail,ladder etc same including. Alignment correcting and setting completeincluding cost of all machinery, labour all incidental and conveyance ,lead and lift charges etc complete but excluding cost ofmaterial already supplied (Rate analysis 10 qtl Erection)

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Overhauling gate valves

od45959/2020_2021/MH : Overhualing the existing gate valve of field distributories after cleaning the same , greasing, changing the nuts and washers,supply of handle,cover plate and trail run as per directions from deptl.officers at site.cost includes cost of all materials, labour, conveyance etc..

Bidder Name

PEETHAMBARAN