ADDITION ALTERATION CUM SPECIAL REPAIR TO CERTAIN OFFRs JCOs ORs MD ACCN AT CHAUBATTIA ALMORA NAINITAL AND RANIKHET INCL GHINGARIKHAL UNDER GE RANIKHET

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M & L for screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes Complete all as specified and directed.

M & L for Vitrified Ceramic tiles 10 mm thick (square/rectangular) polished light / dark shade, area of each tiles not exceeding 0.36 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cemet to match complete all as specified and directed.

All as per item No 3 above but for dado /skirting complete all as specified and directed.

M & L for non skid ceramic coloured /printed tiles 7 to 8 mm thick (square / Rectangular) area of each tiles exceeding 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles complete all as specified and directed.

All as per item No 5 above but for dado /skirting complete all as specified and directed.

M & L for non skid ceramic coloured /printed tiles 7 to 8 mm thick (square / Rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles complete all as specified and directed.

All as per item No 7 above but for dado /skirting complete all as specified and directed.

M & L for non skid ceramic coloured /printed tiles 7 to 8 mm thick (square / Rectangular)area of each tiles exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting complete all as specified and directed.

M&L for glazed ceramic coloured / printed tiles 450x300x7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thikness laid dry and pointed in floors, apron etc complete all as specified and as directed.

M&L for machine cut, pre-polished kota stone mirror polish slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement and pigment complete all as specified and as directed.

M&L for machince cut kota stone slab 20-25mm thick as in floor/ tread of steps laid over and including 15mm thick screed bed in CM 1:6, set and jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing including rounding the edges complete incl demolition of cement concrete 40mm thick as in floor/ treads complee all as specified and directed.

M&L for Black Granite (of any type) stone 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing in cooking platforms and the like complete all as specified and directed.

Dismatling timber scantling 40 sqcm and over in section & in any position ,unframed work complete all as specified and directed

S&F 2nd class hardwood clean sawn in scantling timber framed and fixed complete all as specified and directed.

Dismantling of boarding of any description fixed in any position like wall ,wooden flooring and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

S&F for 2nd class hardwood 25 mm thick boarding plain one side with butt joint fixed with nails in any situation complete all as specified and directed.

Fixing only second class hardwood boarding of any thickness complete all as specified and directed. ( Note :- Old serviceble boarding obtaind from item No - 18 above shall be reused under this item.)

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided (Reinforcement shall be cut as requried to facilitate demolition) complete all as specified and directed.

M&L for Reinforced cement concrete, 1:2:4 Type B1, (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to rough finished surface of concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

S&F mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) Complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement Complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.& removing rubbish to a distance not exc 250m complete all as specified and directed.

M&L for rendering 15 mm thick on faces of brick work or stone masonry or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement includig mixing of water proofing compound of approved make as per manufacturer's instruction complete all as specified. Note:- WPC to be measured and paid seperately.

M&L for rendering 15mm thick in cement mortar 1:6, surface finished even & smooth with a dubbing out average 10mm thick on irregular face of walls, complete all as specified & directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 finished even and smooth in ceiling without using extra cement complete all as specified & directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 finished even and smooth in ceiling without using extra cement complete all as specified & directed.

M&L for preparing newly plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of primer (Priming the plastered and other surface prior to distempering) complete all as specified and directed.

M&L for Preparing new plastered or un-plastered surfaces and Applying two coats of 100% Premium acrlic emulsion paint having VOC less than 50 gm/Ltr and UV resistance as per IS 15489-2004 Alkali & fungal resistance dirt resistance exterior paint of requried shade (company Depot tinted) with silicon [email protected] Ltr/10 sqm over and including priming coat of exterior primer applied @.90 ltr/10 sqm over new surface complete all as specified and directed.

M & L for complete removal of existing treatment for preparing old painted surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm /litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exteriror paint of requird shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and includidng priming coat of exteriror primer applied @ 0.90 litre/10 sqm complete all as specified and directed.

M&L for complete removal of existing treatment for preparing old painted surfaces and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilings and applying two coats of white wash incl complete removal of existing treatment on old plastered surfaces complete all as specified and directed.

Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc complete all as specified and directed.

M&L for precast cement concrete 1:3:6 type C-1 (using 20 mm graded stone agg) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.

M&L for fly ash brick work using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even & smooth without using extra cement complete all as specified & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each.& removing to store complete all as specifed & directed.

Taking down & Refixing chowkhats or frames with shutters (without taking off shutters from the frame) of any description not exceeding 1.5 Sqm each in the same opening complete all as specified and directed.

All as per item No 42 above but exc. 1.5 sqm but n. exc.4sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters ( per leaf ) of any description exceeding 1.00 sqm each but not exceeding 2 Sqm each complete all as specified and directed.

Taking down and refixing of shutters of any description not exceeding 1 Sqm each in the same opening complete all as specified and directed.

M&L for second class hard wood plain, solid, straight chowkhats and frames, wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for second class hard wood for factory made, 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F for factory made, 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. edges of framing plain, chamfered or rounded complete all as specified and in SSR Part I Sec 8 Clause 8.24 (a) and as directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame (116 x 45) mm & sash (46 x 62) mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners (100 x 8 mm) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note:- For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F for factory made glazed and skeleton shutters 30 mm thick using second class hard wood open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.20(b); supplied and fitted in chowkats complete all as specified and directed.

S & F 100 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 150 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F floor door stopper of chromium plated body with rubber shoe fixed in door, overall length of cover plate 140 mm complete all as specified and directed.

S & F butt hinges, medium weight, cold rolled Mild steel and fixed, size of hinges 75mm complete all as specified and directed.

S & F butt hinges, medium weight, cold rolled Mild steel and fixed, size of hinges 100mm complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

M & L for Block boards, 25 mm thick, grade 1 quality, exterior grade, decorative face on both faces, fixed with screw to timber frame work in cup board shutters/shelves incl teak wood beading complete all as specified and directed.

M & L for Continuous (piano) hinges width of flap 30 mm mild steel , bright finish or eletrogalvanised complete all as specified and directed.

M & L for Block boards , 18/19 mm thick, grade 1 quality, exterior grade,Commercial type , fixed with screw to timber frame work in cup board shutters/shelves complete all as specified and directed.

M&L for old painted surface to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with one coat of synthetic enamel including preparation of surfaces complete all as specified and directed.

M&L for old painted surface to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel including preparation of surfaces complete all as specified and directed.

M&L for painting to newly steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F in repairs welded wie fabric complete to wood or steel member complete all as specified and directed.

S&F MS framed work such as grills, gratings, etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed.

S&F Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W(Gde- E-250) quality- A complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless steel wire staples or wooden beads complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair sheet glass, 3mm thick figured , pin headed and glazing with beadings in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F Factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (Note:- Rate for M.S. hold fast/ lugs or SS dash fasteners shall be inclusive in the quoted rates).

S&F Factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- Rates for stainless steel butt hinges and necessary SS screws shall be inclusive in the quoted rates.)

M&L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 40mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4) cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends,tees,short pieces,connectors,elbows,reducers,union sockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

Refixing of old 15 mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.

S&F GI water tubing of 20 mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends,tees,short pieces,connectors,elbows,reducers,union sockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

Refixing of old 20 mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc complete all as specified and directed.

S&F GI water tubing of 40 mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends,tees,short pieces,connectors,elbows,reducers,union sockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

Refixing of old 40 mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc complete all as specified and directed.

S&F in repairs stop valves/angle cock cast copper alloy, fency type chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore dia of pipe complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, fency type chromium plated with long shank & cup (concealed) , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore dia of pipe complete all as specified and directed.

S & F in Repair vitreous china wash basin, white, flat back, size 620mm x 480mm, (flat back or angle back type) including brackets and including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed by Engineer in Charge.

S&F 32 to 40mm dia , 600 mm long PVC waste pipe for wash basin and kitchen sink complete all as specified and directed.

S&F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer in Charge.

S&F 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer in Charge.

S & F in repairs 15 mm bore Fancy type chromium plated central hole Wash Basin Mixer without popup waste system with 450mm long braided hoses, screwed down high pressure with or without lettered hot and cold screwed for iron pipe complete all as specified and directed by Engineer in Charge.

S & F in repairs 15 mm bore Fancy type chromium plated Wall Mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges, screwed down high pressure with or without lettered hot and cold screwed for iron pipe complete all as specified and directed by Engineer in Charge.

S&F in repairs bib taps, cast copper alloy, 15 mm dia, Chromium Plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified by Engineer in Charge.

S& F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect complete all as specified & directed by Engineer in Charge.

S & F Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed by Engineer in Charge.

S & F in repairs 15 mm bore fancy type Telephonic Shower (Health Faucet), Cast Copperalloy, with chromium plated, screwed down high pressure with or without lettered hot or cold with length not less than 1.0m long screwed shanks and fly nuts, screwed for iron pipe / stop value and fixed complete all as specified and directed by Engineer in Charge.

S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. in repairs including Provn of lime concrete bedding and making good to floor complete all as specified & directed by Engineer in Charge.

M&L for sunken floor treatment described as under (i) to (vii):- (i) Demolition of cement concrete of any description and in any position not otherwise specifically provided for in any type of filing in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) Vertical sides shall be plastered in CM (1:3) 15 mm thick mixed with water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC covering when the same is green i.e. PCC & plaster be carried out at the same time complete all as specified and directed. (iii) M&L for 40mm thick (Min) PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. (iv) After laying sewage/ plumbing pipes with fixtures in position 2 coats of OMIPLAS EP-101 epoxy compound shall be applied complete all as specified and directed. (v) Spouts of 25mnm dia GI pipe light grade projecting 450mm clear of face outer a wall with mosquito proof cap on inner face of pipe shall be provided to drain out seepage water, including cutting holes and making good if needed as specified and directed. (vi) M&L to fill the sunken floor with PCC (1:5:10) type E-2 using brick aggregate over the treated surface complete all as specified and directed. (vii) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defects complete all as specified and directed. The sunken portion shall be tested for leakage/seepage/ dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical and tested again. The process of grouting and testing shall be repeated till leakage/seepage/dampness is eliminated and inclusive in the quoted rate itself.

S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, including brackets and connections to pipe complete all as specified and as directed Make:- Cera cat part No:-CIRIL-2617

S&F for 32mm bore high density polyethylene pipes (HDPE) complete all as specified and directed.

S&F for 75mm dia Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.

S & F in repair 100 mm bore Cast iron soil, waste & vent pipe (spun pipes) in any length with or without ears , with cement joints fixed to walls or floor complete all as specified and directed.

S & F 100mm bore Cast iron bends diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S & F 100mm dia cost iron cowls complete all as specified and directed.

S & F in repair 75 mm bore Cast iron soil, waste & vent pipe (spun pipes) in any length with or without ears , with cement joints fixed to walls or floor complete all as specified and directed.

S & F in repair 75mm dia cost iron cowls complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20 mm dia, D; type, 60 cm long between flanges complete all as specified and directed by Engineer in Charge.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing with cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer in Charge.

S&F Stainless steel wall mounted plate rack of size 780mm x760mm x 240mm, thickness of sheet not less than 1.0 mm and weight not less than 7.50 kg of approved design/pattern (as approved by Engr-in-charge) with provision for keeping plate and other crockery, fixed with screw and rawl plugs etc on wall complete all as specified and directed by Engineer in Charge.

S&F in repairs Chromium plated shower rose 125mm swivel type complete all as specified and directed by Engineer in Charge.

S & F in repairs 20mm Dia Aluminium alloy anodised curtain rod decorative fency type with brackets complete all as specified and directed by Engineer in Charge.

S & F PVC connections 15mm dia , 450mm long, , with PTMT nuts & washers at both ends complete all as specified and directed.

Dismatling PVC Water tank Exc 250 & n exc 500 ltr and removing from site complete all as specified and directed.

Dismatling PVC Water tank Exc 500 & exc 1000 ltr and removing from site complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks 1000 ltr capacity, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer in Charge.

S&F Rotational moulded polyethylene water storage tanks 500 ltr capacity, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer in Charge.

S&F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Dismantaling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvaLume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall, fixed self tapping screws complete all as specified and directed by Engineer in Charge.

All same as per item No-126 above but except sheeting (any thickness) complete all as specified and directed . ( Note :- Old sheet shall be obtaind from item No-125 above shall be reused under this item)

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall , fixed self tapping screws complete all as specified and directed by Engineer in Charge.

S&F 0.63 mm galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls, etc with grade of zinc coating 275 complete all as specified and directed by Engineer in Charge.

All as per item No 129 above but fixing only with and including all necessary fixing arrangement complete all as specified and directed. NOTE :- OLD SHEET OBTAINED FROM DISMANTLING SHALL BE USED UNDER THIS ITEM.

S & F of 0.63 mm plain galvanised mild steel sheeting, in ridges, hips, vallery gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coaating 275 complete all as specified and directed by Engineer in Charge.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

M&L for providing aluminum snap grid frame work for false ceiling with of size 605 X 605 mm, using main and cross tee of size 36.50X 25X1.4mm, weighing 0.24 Kg/rm and 23.5mm X36.4mmX1.4mm weighing 0.191Kg/rm. The snap grid be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36 Kg/rm. the snap grid shall be fixed to ceiling supporting hangers consisting of 2 mm dia ms wire/GI wire , nuts and washers as per manufacturers complete all as specified

S & F 4 mm thick Non asbestos fiber disigner ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 595 X 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of old upper surfaces such as purlins and rafters etc complete all as specified and directed

All as per item no 134 above but except snap grid all as specified and directed.

All as per item no 134 above taking and refixing old ceiling boards including snap grid frame work all as specified and directed.

M&L for 50 mm thick Cement concrete 1:2:4 type-B-1 (using 20 MM graded stone aggregate) as in leveling course or simillar items complete all as specified and directed

Labour for stripping out old tar felt over roofs, parapets, chimney stacks etc as laid horizontally or vertically and removing the debries as directed to a distance not exceeding 250 m complete all as specified and directed.

M&L for cutting out cracks to "V" section in existing roofs or terrace, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

Supplying and laying APP based modified water proofing polymeric membrane, reinforced with nonwoven polyester fabric matt (weight not less than 150 gms/sqm) of minimum 3 mm thick and minimum weighing not less than 3 kg/sqm,laid over bituminous primer on 15mm thick plastered sufaces layer in CM 1:4 with water proofing compound (WPC )@3% by weight on concrete surface roof / parapet, over lap of minimum 75 mm on longitudinal direction and 100 mm on the transverse direction by thermo-fused torch flame application method and top surfaces to be treated with non reflective bituminous aluminium paint @0.15 Kg/Sqm all as per manufacturers instructions as complete all as specified and directed .

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and directed.

M & L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in floors and finishing the top surface even and rough to receive the topping layer or tiling complete all as specified and directed.

M & L for concreting type B1 1:2:4 (20mm graded aggregate) for Chajjas complete all as specified and directed.

M & L for applying two coat of roof paint (Coptic of Jenson & Nicholson Paints or Antisol of Berger Paints) over primer red oxide on steel and iron surfaces of CGI / PGI sheet roof of any description not otherwise described over 10 cm by applying with mordant solution, including washing & cleaning etc.complete all as specified and directed.

M & L for preparation of old painted steel and iron surfaces of CGI / PGI sheet roof of any description not otherwise described over 10 cm width or girth by straightening, cleaning, removing rust and washing cleaning etc to receive painting and making good with red lead putty whenever required and applying one coat of roof paint (Coptic of Jenson & Nicholson Paints or Antisol of Berger Paints) complete all as specified and directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

M&L for PCC 1:3:6 Type C1 (using 20mm graded coarse aggregate) as in hold fasts in masonry walls etc complete all as specified and directed.

S & F FI as in clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed.

Taking down and refixing only vitreous china wash basin, white, flat back, size 550mm x 400mm, (flat back or angle back type) including brackets and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.

Taking down and refixing 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S& F 32mm PVC waste pipe for wash hand basin/kitchen sink complete all as specified and as directed.

M&L for 75mm dia PVC floor trap with steel grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR), waste & vent pipe single socketed in any length with rubber ring joints & fixed to wall or in floor complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR), waste & vent pipe single socketed in any length with rubber ring joints & fixed to wall or in floor complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

S&F smal fittings such as brackets of any type, latch and hinge blocks, shaped door and windows stops and the like, including all necessary labour articles n exc 200 cum each complete all as specified and directed.

S & F 50m size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F in repair gun metal, globe or gate valves, with iron wheel head, screwed both ends bore dia of pipe 40mm for iron pipe and fixed for complete all as specified and directed.

Surface Excavation in hard/dense soil n,exc 30cm deep and averaging 15cm deep and getting out complete all as specified and directed.

M & L for hard core of gauge not exc. 63mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L 75 mm thick cement concrete 1:4:8 type D-2 finished fair and even as in sub base Complete all as specified and directed.

M&L for chequred cement concrete tiles of size 300x300x25 mm thick coloured rubber pressed glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles as in floor / steps, complete as all specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kerb, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs, sides of interlocking/chequred tiles and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Removing Excavated soil exceeding 250 M but not exceeding 500M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

M & L PCC 1:2:4 type B1 using 20mm graded stone agg as in precast cover slab for main holes, drains, channels etc set in cement mortar 1:4 including necessary from work complete all as specified and directed.

M&L for fly ash brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) complete all as specified & directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 m depth for foundation, etc., and getting out in Hard/ Dense soil complete all as specified and directed. (Note Quantity of 153.80 cum is for E/M portion)

Demolition and breaking up drain pipes 150 mm (salts glazed ware ,AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed as specified complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150mm bore complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed. (Note Quantity of 111.00 cum is for E/M portion)

BLANK

M&L for concrete 1:3:6 (40 mm graded aggregate) for Surface channel in drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L for Rough Excavation over areas n. exc 1.5 deep in Hard and dense soil and getting out including removing excavated material exc 250 deep but n. Exc 500 m and depositing where directed complete all as specified and directed.

M& L for soil filling under floor or in founndation including watering and consolidation including spreading and levelling in layers n exc 25 cm thick including well ramming , watering complete all as specified and directed.

M&L for applying 2 mm thick layer of JK/ Birla putty on wall surfaces including cornics etc for proper levelling of plaster complete all as specified and directed.

S&F three track aluminum powder coated sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed.

M&L for Pre laminated exterior grade both side laminated board , 19/20 mm thick, grade 1 quality, exterior grade,Commercial type , fixed with screw to timber frame work in cup board shutters/shelves complete all as specified and directed.

S&F chromium plated Soap dish fixed to plug with chormium plated brass screws all as specified and directed by Engineer in Charge.

Disconnecting existing PVC tank Exc 250 Ltr and n. exc 500 Ltr, Setting a side (or lowering if requried) for repair, cleaning etc. and hoisting if requried reconnecting and refixing in position( cleaning repairing etc ) complete all as specified and directed

S&F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and directed by Engineer in Charge.

S & F in Repair Galvanised mild steel plain wire cloth, 2mm nominal dia of wire and a and fixed with Stainless steel wire staples complete all as specified and directed..

Supply only Integral water proofing compound complete all as specified and directed.

S & F 75 mm bore cast iron bends dimnishing pieces or tappers (larger bore measured) complete all as specified and directed.

S & F 100 mm mild steel pressed handle oval type stove enameled black complete all as specified and directed.

S & F 150 mm mild steel pressed handle oval type stove enameled black complete all as specified and directed.

S & F aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S & F 300mm long mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with & including a minimum of 6 bolts and nuts (four on bolt plates and two on staple plate) complete all as specified and directed.

S & F for 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed..

S & F in repairs 15 mm bore Fancy type chromium plated Wall Mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges, screwed down high pressure with or without lettered hot and cold screwed for iron pipe complete all as specified and directed by Engineer in Charge.

Taking down carefully Copper/Aluminium point wiring (Light fan socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing materials from site and making good disturbed surface of walls, floors etc, complete all as specified and directed.

M&L for concealed point wiring surface type with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic concealed PVC conduit 20 mm or higher dia (including chase cutting in brick / stone/ block masonry walls for fixing conduit and making good disturbed surfaces), light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistranded copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with brass screws, cup washers and making good the disturbed surfaces, complete all as specified and directed for the following :- (a) One light point/ exhaust / ceiling fan point/bell point controlled by one, one way switch of 5/6 Amps complete all as specified and directed.

(b) One 3 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board complete all as specified and directed.

(c) One 3 pin 5/6 amps socket out-let point on same board controlled by one, one way switch of 5/6 amps complete all as specified and directed.

(d) One light point controlled by two way switch

All as per item No. 191 herein above but with 2.5 Sq mm cable (FRLS) for one 15 Amp socket outlet controlled by one switch on independent board and 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete all as specified and directed.

M & L point wiring for modular fittings for one light point/ fan/ bell/ 5Amps socket out let (independent)point controlled by one, one way switch with 1.5 sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) incl modular metal flush box for mounting modular fittings and covered with modular cover plate with frame and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed. (a) One light/One fan/one bell point controlled by one modular switch complete all as specified and directed.

(b) One light point controlled by two way modular switch complete all as specified and directed.

(c) One 3 pin 6 amps modular socket out-let point on same board controlled by one, one way switch of 5/6 amps complete all as specified and directed.

(d) One 3 pin 5/6 amps modular socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board complete all as specified and directed.

All as per item No. 196 herein above but with 2.5 Sq mm cable (FRLS) for one 5 pin 16 Amp modular socket outlet controlled by one switch on independent board and 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete all as specified and directed.

S&F modular type switch single pole, one way 6 Amp complete all as specified and directed.

S&F socket out let multi 5 pin, 6 Amps, modular type complete all as specified and directed.

S&F switch modular type single pole, one way 16 Amp complete all as specified and directed.

S&F socket out let 2 in1,3 pin, 6 and 16 Amp, modular type complete all as specified and directed.

S&F modular switch, 2 way 6 Amp 1 module complete all as specified and directed.

S&F modular bell push, 6 Amp 1 module complete all as specified and directed.

S&F switch piano, flush type, single pole, two way 5/6 Amps complete all as specified and directed

S&F switch piano flush type, single pole, one way 5/6 Amps complete all as specified and directed

S&F socket out let multi purpose 5 pin, 5 Amps, flush type complete all as specified and directed.

S&F switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

S&F socket out let 2 in1, 3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S&F ceiling rose surface bakelite 62.5 mm x 25 mm two to three terminals complete all as specified and as directed.

S & F Lamp holder, angle type, PVC / polycarbonate with back plate & metal ring suitable for batten/wall fittings, complete all as specified as directed

S & F call bell ding dong AC, 230V single pole complete all as specified and directed.

S&F bell push piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply and fix High quaity LED light fitting 1x20 Watt ,230V, T8 batten white powder coated decoraive end cap with retrofit polycarbonate tube including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. Make:- Crompton cat part No DIJB12LT8-20 + LTT8-20, HAVELLS cat part no REGALBATTEN8UPTO1X22WDSBSWH, BAJAJ Cat part No BLRB-DB118+BLRB20CWLED

S&F wall bracket type, 09 watt LED decorative fixture made up of polycarbonate base B-22 and LED lamp complete all as specified and directed. Make: Havells Cat part No: LHDL06160099, Surya Cat part no: SLEWL 6W-GS200 or Equivalent in Mepro Electricals

S&F bed side LED light fitting , 6 watt, with independent switch & G-22 holder and LED lamp complete all as specified and directed.

Supply and fix LED Bulb 9 Watt complete all as specified and directed.

S & F in repair MCB single pole, 240 volts, 5 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type in the MCB DB including taking down complete all as specified and directed.

S & F in repair MCB single pole and neutral, 240 volts, 32 Ampere, rupturing capacity 10 KA, including taking down complete all as specified and directed.

S&F in repair MCB DP , 240 volts,AC B curve, 10 KA 40 Amps complete all as specified and directed.

S&F in repair MCB FP , 415 volts, AC B curve, 10 KA , 40 to 100 Amps complete all as specified and directed.

S&F in repair sheet metal enclusure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F in repair sheet metal enclusure for DBs(double door type) single pole and neutral 12 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F in repair sheet metal enclusure for DBs (double door type) Triple pole and neutral 4 way including blacking platge as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed.

S&F in repair sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps complete all as specified and directed.

S&F in repair sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 6 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 4.0 Sqmm copper conductor PVC complete all as specified and directed. (Note:- Two single core cables along with earth wire and conduit shall be measured as one unit length).

S&F in repair sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 10 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 6.0 Sqmm copper conductor PVC complete all as specified and directed. (Note:- Two single core cables along with earth wire and conduit shall be measured as one unit length).

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note:- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

Supply & Fixing in repair LED bldg security light fitting 35 W/36 W, 230V AC outdoor type with high pressure die cast aluminium IP66 roadway luminaire with high power LED as light source and electronic driver including GI bracket light grade with impact and corrosion resistant including thermal management in multiple optics and provn of electric supply to fitting from source by means of PVC Sheathed multi-stranded aluminium conductor cable complete including taking down existing old light fitting any type complete all as specified and directed.

S & F LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser including LED light driver holder, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. Make:- Havells cat part no HEXAFT10WLED857SSYMBOPC, Bajaj Cat part No BIBWP 10WLED, CROMPTON cat part no LMHE-10CDL

Supply and fix High quality LED lighting fixture mirror type with high output diffuser 2 feet 1x 10 Watt. 220V AC,complete with polycarbonate tube, white/warm white suitable for mirror light internally pre wired of 1.5 sqmm three core flexible cable complete all as specified & directed Make:- HPL cat part no HLPT515 10CW, HAVELLS cat part no LUMILINEPLUSBS10WLED865SPCSS, BAJAJ Cat part no BCLSB10WH

S&F Exhaust fan metallic bady ISI mark, 300 mm size with blades and frame and louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 250 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

Taking down storage type water heater (geyser) of any type /make up to 50 Ltr capacity after disconnecting electric / water connections and refixing the same after carrying out necessary repairs including reconnecting the electric / water connections and testing complete all as specified and diected.

Supply & Fixing of non metallic PVC conduit 25 mm exclusive of boxes but including of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers , lock nuts, saddles, pipe hooks etc. concealed in wall ceiling floor etc for television/DTH/ telephone/Data cable complete all as specified and directed.

S& F socket outlet for TV/Video/audio device modular type with inner and outer modular plate type, specially built for wall/high mounted TV and incl pressed steel/metal flush box concealed complete all as specified and directed.

S& F socket outlet for Telephone (RJ11) modular type with inner and outer modular plate type for communication (telephone) incl pressed steel/metal flush box concealed complete all as specified and directed.

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised strip 32x6mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note:- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50.0 sq mm 3.5 core complete all as specified and directed.

Removing excavated material to a distance not exc 15 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M & L for laying of dry, clean fine sand as in cushioning or filling in trenches around underground cable complete all as specified and directed.

Supply & laying of sub class ‘B’ old size bricks, laid flat i.e length of brick shall be laid across the length of cable for protection of under ground cable complete all as specified and directed.

M&L for GI pipe light grade with all fittings fixed to pole and laid to floor/ground for mechanical protection of cable of the following sizes :- (a) 40mm bore

All as per Item No 249 above but 25mm bore complete all as specified and directed.

Note : Tenderers may note that amount of credit Rs 5,90,000.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/s Arihant Builders

HIND CONSTRUCTIONS

M/S ANIL KUMAR

SS Construction Co

Prem singh kuwarbi and co