MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL BUILDING LOCATED AT KANSAD, KANAKPUR, SACHIN, PARDI KANDE, IN AREA OF SOUTH ZONE -B (KANAKPUR) , SURAT (2ND ATTEMPT)

SN ITEM Qty SOR 23-24 Unit Total

Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.

Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 Mt. depth 10 117.26 C.M.

Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.

Comp. (A) Loose or Soft soil

Executed With Manual Labours

(1) Up to 1.5 Mt. depth 5 203.83 C.M.

Providing & Laying C.C1:5:10 (1cement :5coarse sand :10 graded stone agg.

3 m.m Nominal size )& curing comp. excl. cost of from work in :Foundation & 5 2,517.44 C.M.

Providing & laying cement concrete 1:4:8 (1 cement:4 coarse sand:8 graded

4 stone agg. 40 mm nominal size) & curing comp. excl.cost of form work in (A) 5 2,680.21 C.M.

Foundation and Plinth

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

5 20m.m Nominal size)&curing comp. excl. cost of form work in :(a) foundation 10 3,005.76 C.M.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form work but

exclu. Cost of reinforcement for reinforced concrete work in : (A) Foundation,

footing, Base of columns and Mass concrete.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

7 foundations etc. in layers not exceeding 20 cm. in depth consolidating each 10 130.39 C.M.

disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

9 comp. Incl.. Cost of form work but excl. Cost of reinforcement for R.C.C. Work in

(1)Having c/s area up to 0.08 s.mt- Ground Floor 5 12,632.60 C.M.

First Floor 3 12,672.24 C.M.

Second Floor 2 12,711.88 C.M.

Terrace (third) Floor 1 12,751.53 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt - G.F 5 11,166.97 C.M.

First Floor 3 11,206.61 C.M.

Second Floor 2 11,246.25 C.M.

Terrace (third) Floor 1 11,285.89 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 5 9,201.68 C.M.

First Floor 3 9,241.32 C.M.

Second Floor 2 9,280.96 C.M.

Terrace (third) Floor 1 9,320.61 C.M.

(1)Having c/s area up to 0.08s.mt- Ground Floor 5 9,102.61 C.M.

First Floor 3 9,142.25 C.M.

Second Floor 2 9,181.89 C.M.

Terrace (third) Floor 1 9,221.53 C.M.

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m - G.F 5 8,174.41 C.M.

First Floor 3 8,214.05 C.M.

Second Floor 2 8,253.69 C.M.

Terrace (third) Floor 1 8,293.33 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 5 7,086.88 C.M.

First Floor 3 7,126.52 C.M.

Second Floor 2 7,166.16 C.M.

Terrace (third) Floor 1 7,205.81 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'.- G.F 5 7,984.42 C.M.

First Floor 3 8,024.06 C.M.

Second Floor 2 8,063.70 C.M.

Terrace (third) Floor 1 8,103.34 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.- G.F. 5 7,396.96 C.M.

First Floor 3 7,436.60 C.M.

Second Floor 2 7,476.24 C.M.

Terrace (third) Floor 1 7,515.89 C.M.

(4) Slabs having more than 13 cm. Thickness -- G.F 5 6,813.01 C.M.

First Floor 3 6,852.65 C.M.

Second Floor 2 6,892.29 C.M.

Terrace (third) Floor 1 6,931.94 C.M.

(D) LINTELS: -- G.F 5 9,531.24 C.M.

First Floor 3 9,570.88 C.M.

Second Floor 2 9,610.53 C.M.

Terrace (third) Floor 1 9,650.17 C.M.

(E) CHAJJAS: -- G.F 5 5,512.83 C.M.

SN ITEM Qty SOR 23-24 Unit Total

First Floor 3 5,552.47 C.M.

Second Floor 2 5,592.11 C.M.

Terrace (third) Floor 1 5,631.76 C.M.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

10 comp. Incl.. Cost of form work but excl. Cost of reinforcement for R.C.C. Work in

(A) Stair cases including landings etc.

Ground Floor 1 7,380.20 C.M.

First Floor 1 7,419.85 C.M.

Second Floor 1 7,459.49 C.M.

Terrace (third) Floor 2 7,499.13 C.M.

(B) Vertical and horizontal fins

Ground Floor 2 10,831.75 C.M.

First Floor 1 10,871.40 C.M.

Second Floor 1 10,911.04 C.M.

Terrace (third) Floor 1 10,950.68 C.M.

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work

incl. bending, binding & placing in position etc.comp.---Ground Floor

First Floor 50 77.21 Kg.

Second Floor 50 78.21 Kg.

Terrace (third) Floor 50 79.21 Kg.

Brick work using common burnt clay building bricks having crushing strength

not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(C) Fly Ash Bricks

First Floor 10 4,786.95 C.M.

Second Floor 5 5,061.92 C.M.

Terrace (third) Floor 5 5,379.24 C.M.

Half brick masonry in common brunt clay building bricks having crushing

13 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - 25 625.53 S.M.

coarse sand ) in foundation and plinth (C)Fly Ash Bricks

Ground Floor 20 678.86 S.M.

First Floor 10 631.79 S.M.

Second Floor 5 638.04 S.M.

Terrace (third) Floor 5 644.29 S.M.

Uncoursed rubble masonary with hard stone of approved quality in

14 foundations and plinth in cement mortar 1:6 (1 Cement : 6 sand) including 5 2,500.01 C.M.

leveling up etc. complete.

Providing Rubble Pitching with hard stone of approved quality in

15 cement mortar 1:6 (1 Cement : 6 Coarse sand) including leveling up 5 2,550.00 C.M.

,Curing etc. complete excluding pointing

Providing and filling rubbles including hand packing and filling interstices with

quarry spalls behind abutments and between returns as directed.

Providing & Applying 10mm.th.cement plaster in single coat on brick/

concrete walls similar surfaces for plastering & finished even & smooth with a

17 floating coat of cement slurry mixed with admixture of lime or neeru in 100 189.79 S.M.

required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall

and similar surfaces -- Ground Floor

First Floor 50 217.93 S.M.

Second Floor 20 246.07 S.M.

Terrace (third) Floor 10 274.20 S.M.

(B) For ceilings &soffits of stairs

Ground Floor 100 214.60 S.M.

First Floor 50 242.74 S.M.

Second Floor 20 270.88 S.M.

Terrace (third) Floor 10 299.02 S.M.

Providing & Applying 15mm.th.cement plaster in single coat on brick/

concrete walls similar surfaces for plastering & finished even & smooth with a

18 floating coat of cement slurry mixed with admixture of lime or neeru in 10 237.51 S.M.

required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall

and similar surfaces -- Ground Floor

20mm thick sand faced cement plaster on walls for height more than

metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1- sand)

Providing 20 mm thick double coat mala cement plaster on brick / concrete

work for plastering comprising of base coat 12 mm thick cement plaster

in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick

top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel

including scaffolding curing etc. complete.

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1

cement: 1 sand) apply thick cement slurry and apply roller horizontal as well

as vartical ( two times ) up to good quality and size of grain in elevation as per

directed by engineer incharge.

Providing throating or plaster drip and moulding it to R.C.C. chajja etc.

comp.. For all floor

Providing 20 mm deep finished groove in plaster in line and level etc.

Comp. For all Floor (M.R.)

SN ITEM Qty SOR 23-24 Unit Total

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

24 Lime putty :1.5 - coarse sand) laid over and jointed with grey cement 500 989.45 S.M.

slurry mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

25 Cement : 3 coarse sand) and jointed with gray cement slury mixed with 50 1,076.94 S.M.

pigment to match the shade of slab including rubbing and polishing etc.

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring, treads of

steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 sand)

finished with flush pointing in white cement etc.com. For all floors

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of steps &

dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary cement

paste for fixing and joined with white cement slurry etc. complete. For all floors

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and

28 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse 50 914.69 S.M.

sand ) finishing with flush pointing in white cement.

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps

29 and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) 50 987.86 S.M.

and jointed with white cement slurry

Providing & laying granite slab 18mm thick in flooring, treads of steps

and landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement :

30 coarse sand) or lime mortar 1:1.5 laid and finished with flush pointing in white 50 2,410.00 S.M.

or colour cement including rubbing and polishing complete. ( Basic Rate:-

Providing & laying granite slab 18mm thick in skirting, risers of steps,

dedo and pillars laid on 10mm thick cement mortar 1:4 (1 Cement :

Coarse sand) and finished with flush pointing in white or colour cement

including rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in Window-Door seal Frame

Etc laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) with

32 nessary adhesive material and finished with flush pointing in white or colour 50 2,026.00 S.M.

cement, including rubbing & polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

33 Labour Charges For Edge Finished For Granite 100 43.43 R.M.

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell, Asian or Euro make in flooring,treads of

steps & Landing laid on bed of 20 mm (Average) base of cement mortar

1:6 (1 Cement : 6 Coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of existing flooring and

jointed with colour cement slurry including finished with flush pointing &

cleaning the surface etc. comp.Size 24" x 24"

For Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring

35 treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 50 1,040.35 Sqm.

cement : 3 coarse sand) finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting

36 risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse 50 1,081.71 Sqm.

sand) and jointed with white cement slurry.

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face

water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on

both side with adhesives as specified by the manufacturers. The laminate shall

be as per approved shade & texture, of make incl. Sal wood frames of

finished size 12cm x 7cm.incl. S.S. Hinges with nessary screws &

Anodized aluminum fixtures & fastenings For all Floor

38 Same as Above But Without Frame 20 2,520.00 S.M.

Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows

& clearstory windows incl. Indian teak wood frames of finished size 12cm x

7cm.incl. anodized aluminum fixtures & fastenings incl. Primer coat of

approved quality & two coats of oil painting etc. For all Floor (A) Fully Panelled

(B) Partly Panelled and Partely Galzed 10 5,185.03 S.M.

(C) Fully Galzed 5 4,551.69 S.M.

Providing and fixing 35mm thick shutters for Doors, windows and

clearstory windows including anodised alluminium butt hinges with

necessary screws.

(A) Indian teak wood. (i) Fully Panelled.

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP

shutter with wood grain raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam done in situ along with

embedded wooden pieces for stiffening & also taking hinges & fixtures. The

whole FRP frame & shutter is to be water proof weather proof,termite proof

&resistance to mild acid/alkali. Rates are to be inclusive of S.S.hinges with

fastener sleeve & alluminium fixtures & fastentings.

Providing & fixing M.S.Grills of required pattern to wooden frames of windows

etc. At all floor levels with M.S. flats at required spacing & frame around

42 square or round bars with round headed bolts & round headed bolts and nuts 1500 104.20 Kg.

or by screws incl. Priming coat of Red lead paint etc. comp. (A) Plain grill For all

SN ITEM Qty SOR 23-24 Unit Total

Providing & fixing in position collapsible steel shutters with vertical channels

20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size with top

43 & bottom rails of T-iron 40x40x6mm. with 38mm dia. steel pulleys comp. 20 5,865.10 S.M.

with bolts, locking arrangements, stoppers, handles incl. applying a priming

coat of Redlead paint etc. comp.

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe

44 with hooked ends to RCC slabs curing, layig including painting the 10 129.02 Each

exposed portion of loops, all as per standard design complete.

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing,

centering, vibrating, curing & mixed with approved water proofing cement

compound or "CEMWET"or"PIDICRETE LW"integral water proofing admixture

as water proofing agent to be mixed with 50 kg. cement bag shall be as

recommended by the manufacture of the water proofing material,

concrete work for top, bottom slab & side pardi for Under ground Tank

& Item incl. Necessary excavation & refilling the available earth, 15 cm th'

45 C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside wall, inside R.C.C. -

pardi as per design, 10mm.th. water proofing cement plaster in C.M. 1:3 with

smooth finishing,watering etc.Comp.to all inner face & bottom of tank

curing etc. comp. incl. Locking arrangement, outlet, inlet, overflow & wash

out pipe arrangement as necessary & C.I. Cover 0.60 x .045 weight not less

then 35kg. etc. com. as per structural drawing excluding Steel & as directed by

Engineer- in-charge

Underground tank 1000 5.46 Lit.

Providing and filling in depressions of Bath and W.C. At all floor levels, after

46 completing plumbing work of pans, pipes,traps etc.with cinder or fly ash as 10 500.00 C.M.

directed by Engineer in charge etc. comp..

NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a prescribed

47 proforma duly stamped (2) The rate shall include for work at all floors & -

conducting water

proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water

proofing compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound

confirming to IS:2645 about 25 mm. th' in the floor of the depression & about

18mm th' On the side walls of the depression up to the floor level, water 30 296.00 S.M.

proofing plaster about 18 mm. th' be continued on the walls above the floor

level for a height of 600 mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading

@0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement consumption

0.316 Bags / S.M.)

(B) Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs, balconies,

terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645 ,brick bats is

finally covered by jointless cement plaster 20mm th. in C.M. 1:4 added with

special water proofing compound confirming to IS:2645 & top smooth finished

with trowel with false chequered marking of 300 mm.size.The treatment is

carried along the vertical surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata Incl. curing etc. Comp.

With average thickness of 120 mm and minimum thickness at khurra as

(c) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to be

down in order and as directed and specified by the engineer-in-charge. With -

average thickness of 120 mm and minimum thickness at khurra as 65 mm.

(Cement consumption 0.511 Bags / S.M.)

Proiding & laying water proofing treatment to vertical and horizontal

surfaces like consisting of (a) I course of applying cement slurry 4.4 kg per

sq.mt. mixed with water proofing compound confirming to IS:2645 in

rcommended proportions. (b) II corse of 20mm cement plaster 1:3 mixed with

48 water proofing compound in recommended proportion (c) III course of 20 505.00 S.M.

applying blown or / resideal bitumen applied hot at 1.7 kg per sqm of area. (d)

IV course of 400mm micron th. PVC sheet. (Overlaps at joints of PVC sheet

should be 200mm wide and pasted to each other with bitumen about 1.7 kg./

49 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 10 101.91 No.

Providing & fixing at all floor levels,both face polished machine cut edge

50 green kota stone slab (30mm) for urinal partition joined with grey cement 10 900.00 S.M.

slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)

SN ITEM Qty SOR 23-24 Unit Total

Providing & fixing at all floor levels,both face polished machine cut edge

51 Marble slab for urinal partition joined with grey/White cement slurry 5 1,050.00 S.M.

(1:1) incl. Rubbing & polishing etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

WATER SUPPLY AND SANITARY ITEMS -

Prov.& Fixing water closet squatting pan (Indian type W.C.pan) at all floor

levels, size 580mm incl. 100 mm size "P'or "S" trap for water closet squatting

pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1

fine sand) etc. Comp.(A) Vitreous china long pattern of approved colour For

Providing and fixing Wash Down Water closet European type W.C. pan with

integral P or S trap including jointing the trap with soil pipe in cement mortar

1:1 (1 cement : 1 find sand) (seat and cover to be measured and paid

for separately) (A) Viterous china pattern - I (i) in approved colour

Providing and fixing plastic seat and cover for wash down water closet with

54 C.P. brass hinges and rubber buffers (B) Plastic seat and cover. 10 291.33 Each

Providing & fixing wash basin with single hole for pillar tap at all floor levels,

with C.I. or M.S. Brackets painted white incl. cutting holes & making good the

same incl. fittings such as pillar tap, capstan head screw down high pressure

55 with screws, shanks & back nuts, C.P. Brass waste trap, screw down stop tap 10 2,059.93 No.

15 mm. dia. etc. complete. (A) Vitreous china flat back wash basin 550 mm.x

400 mm. size in approved colour For all Floor

Providing & fixing Urinal or approved quality including conecting the Urinal

56 with waste pipe, tap etc. complete. (A) White earthenware flat back or corner 10 1,036.27 Each

type size 430 mm x 260mm x 350mm

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all

57 floor levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to 10 833.73 No.

wooden plugs with C.P.brass screws and washers etc. For all Floor

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5)chamber & water tight C.I. cover with frame of 300mmx300mm size

58 (inside) with weight includ. plastering smooth inside & outside 15mm. th' 5 1,292.19 No.

in C.M.1:3 etc. comp. (i) Square mouth traps---(A) 100mm x 100mm Size -P

(B) 150mm x 100mm Size- P Type 5 1,246.92 No.

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5)chamber & water tight Pre cast R.C.C. cover of 300mmx300mm size

(inside) includ. plastering smooth inside & outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps---(A) 300mm x 300mm Size -P type

(B) 150mm x 100mm Size- P Type 5 1,053.20 No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x

610 mm & 450 mm deep sewer trap chamber with 23 cm th' B.B. masonary

walls in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to

exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone

aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 5 2,904.47 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5 222.71 Each

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M

1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed

faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone

aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. Inside dimension,455 x

610 mm &450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 5 2,681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5 242.39 Each

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of

62 following nominal internal diameters incl. Testing of pipes and joints etc. -

Providing & Fixing C.P. Brass screw down bib tap at all floor levels, polished

bright etc. comp.-(A) 15mm dia. For all Floors

Providing & Fixing gun metal check or non return full way wheel valve at

all floors levels, etc. complete. (A) 15 mm. dia.

Providing & Fixing chromium plated brass half turn flush cock at all

floor levels, of approved quality incl. fixing in pipe line etc. Comp.-- 25 mm dia.

Providing & Fixing abonite ball cock of approved qualities directed etc.

comp. (A) 25 mm. dia.

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size having

weight not less than 35 Kg. etc. complete.

67 Providing and fixing C.P. brass waste for washbasin or sink. -

(A) 32mmdia. 5 67.91 Each

(B) 40mm dia. 5 89.83 Each

SN ITEM Qty SOR 23-24 Unit Total

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B") of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste

68 discharge system at all floor levels incl. All fixtures like bends, tees, shoe etc. 10 412.00 R.M.

jointed with resin of approved brand & manufacture etc. comp. (M.R.) (a)

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A")

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at

69 all floor levels incl. fixtures like bends, tees, shoe etc joined with resin of 10 203.00 R.M.

brand & manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings

make or equivalent as approved by angineer-in-charge. Pipe shall be fixed

70 on the wall the help of clamp at every two meter C/C or shall be -

concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/

Tulsi/Finolex make for water supply line at all floor levels incl. fixtures

like bends, tees, shoe etc joined with resin of approved brand & manufacture

etc. comp. Pipe shall be fixed on the wall the help of clamp at every two meter

71 C/C or shall be concealed as directed including necessary fittings etc. -

including testing of pipe and joints and fixing the same with adhesive solvent,

cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm

diameter with jali of the following nominal diameter of self cleaning design

with C.I. scread down or hinged grating including the cost of cutting and

making good the walls.

Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp. (A) 75 mm. dia.

(B) 110 mm Dia. 5 50.00 NO

Providing & fixing M.S. Holder Bat clamps at all floor levels of approved

74 design to C.I. Or S.C.I pipes including the cost of cutting holes & making 5 30.00 No.

good the wall etc. Complete - 100 mm. dia. (M.R.)

Providing & fixing G.I./Aluminum Patti clamps at all floor levels of approved

75 design to C.I. Or S.C.I pipes including the cost of cutting holes & making 5 20.00 No.

good the wall etc. Complete - 100 mm. dia. (M.R.)

Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI)

76 mark water tank of required capacity each with all necessary fittings & 10000 3.95 Lit.

connection etc. complete on terrace.

Providing & Fixing Kathi around the vertical PVC drainage pipes for

77 concealing with cement plaster 20 mm avg thickness(CM 1:3 [1 cement :3 -

coarse sand]) finishing as per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 10 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 10 180.00 R.M.

Providing & fixing C.P. brass pillar cock with copper connection, C.P.

brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat.

No.: F650003, Jaquar FLR-5011N

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.:

F530004, Jaquar FLR-5041N

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with

80 C.P. copper connecting pipe 450 mm long and nuts, washer and brass flange -

complete, including cutting and making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

F440020 F850094, jaquar CON 053 KN

Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989 ,HindWare

Cat. No.: F160144

Providing and fixing Towel Ring fabricated from seamless stainless steel tube

82 2mm thick in bath room with polished wall flange at end of bars with heavy -

duty anchor fasteners & accessories.

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN- 1121N

,HindWare F880007

SN ITEM Qty SOR 23-24 Unit Total

Providing & fixing S.S.towel rail of 600 mm long approved make including,

83 providing & fixing C.P. brass screws, making holes in walls -

Make- Cera F5015103CH, Parry ware F880005T, Jaquar 1111BSM

,HindWare F880005T

Providing & Fixing stainless steel recessed type Soap dish of approved make.

84 Including providing & fixing screws, washers, cutting -

& making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N

,HindWare F880011

Providing Metropole Flush Valve Dual Flow 40mm

Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ

,HindWare F860075

86 Providing Sink Cock with Regular Swinging Spout -

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-5347N

,HindWare F650013

ITEMS FOR COMPOUND WALL & OTHER MISC. ITEMS :- -

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of

87 the surplus excavated soil as directed within a lead of 50 M. For -

following diameter of piles.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone

agg. 20 mm nominal size)& curing comp. Includ.cost of form work but exclu.

Cost of reinforcement for reinforced concrete work in : (A) Foundation,

footing, Base of columns and Mass concrete.

Providing & laying ordinary cement con.1:2:4 (1cement:2sand:

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

89 comp. Incld. Cost of form work but excl. Cost of reinforcement for R.C.C. Work -

Up to G.L./P.L. (A) COLUMNS:

(1)Having c/s area up to 0.08s.mt 5 12,123.79 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2 10,658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 2 8,692.87 C.M.

(1)Having c/s area up to 0.08s.mt 5 8,593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2 7,665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 2 6,578.07 C.M.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg.

90 20 m.m Nominal size)& curing comp. incl. cost of from work in: wall 2 3,982.62 C.M.

Steel work welded in built up sections, framed work including cutting,

91 hoisting, fixing in position and applying a priming coat of red lead paint -

(A) in beams & joists channels angles, tees, flats with connection plates

angle cleats as in main & cross beams,hip & trussed purlins connected to

common raffers & the like.

(B)For work like chain link fencing, above compound wall etc. 5 9,047.86 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 2 9,711.53 Qtl.

Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick

with nuts, bolts, washer or G.I. pins, excluding M.S. angles etc.complete as per

relevent IS specification & directed by engineer in charge. (TATA or Jindal

Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing

with necessary barbed wire (12 x 14 guage, weight not less than 0.14 kg. / mt.)

pins, hooks, excluding M.S. angles etc. complete as per relevent IS

specification.& directed by engineer in charge

Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated

sheet 0.5 mm. thick roofing fixed with gslvanised grom J or L hook bolts and

bolt 8mm dia with bituman and impet washer filled with white lead etc.

Excluding the cost of purlins rafter and trusses. (Tata / Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron

J or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer

95 or G.I. limpet washer. filled with white lead complete excluding the cost 400 727.13 S.M.

of purlins, Rafters and Trusses. (1) 0.80 mm thick sheet. (Tata / Jindal or

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron

J or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer

96 or G.I. limpet washer. filled with white lead complete excluding the cost 10 1,016.00 S.M.

of purlins, Rafters and Trusses. (1) 0.63 mm thick sheet. (Tata / Jindal or

Providing & fixing 150mm wide 450mm over all semicircular plain

G.I. sheet class-3 gutter with iron brackets 40mm x 3mm size bolts,

97 nuts, washers etc. including marking necessary connection with rain water 10 561.27 R.M.

(i) 0.8 mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J"

98 of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer 10 641.94 R.M.

complete (1) 0.80 mm thick

SN ITEM Qty SOR 23-24 Unit Total

Providing & fixing 150mm wide 450mm over all semicircular plain

G.I. sheet class-3 gutter with iron brackets 40mm x 3mm size bolts,

99 nuts, washers etc. including marking necessary connection with rain water 10 412.00 R.M.

(i) 0.63mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J"

100 of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer 10 464.00 R.M.

complete (1) 0.63mm thick sheet

Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the main

cladding on both edges. All fixing holes must be predrilled oversize as specified

for the sheet length and fastener being used. Fasteners must be fitted with

approved washers. Fixings should be tightened to ensure a weatherproof seal

but they must not be over tightened Side-lap fasteners must also be installed at

101 specified centers with the FRP sheet having clearance holes provided as per the -

main fasteners Weatherproofing shall be provided at all flashing points under

the normal flashing by the fitting of a foam closure strip to match the profile

being used. Closure strips will be sealed to the sheet with an appropriate non

setting silicone sealant. Excluding the cost

of purlins rafter and trusses.

(a) 1.5 mm thick 10 992.00 SM

(b) 2 mm thick 5 1,100.00 SM

Providing & Fixing Polycarbonate sheet roofing with surface of the sheet is

coated with an anti-UV Co-extrusion layer having good weather resistance, it

can maintain its optical properties and mechanical performance for a long time.

Fasting is usually done by screws. , The fastening screws should be inserted

about 500 mm apart and 300mm apart Along the supporting internal purlin

and edge pulin.All fixing holes with diameter at least 2 mm larger than screw

must be predrilled into each screw location. The screws should be 6mm

diameter with length according to sheet thickness and corrosion resistant, with

at least heavy duty hot dripped galvanized or stainless steel. Excluding the cost

of purlins rafter and trusses.

(a) 1.5 mm thick Solid Sheet 10 1,261.00 SM

(b) 2 mm thick Solid Sheet 5 1,510.00 SM

Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in 1:1.5:3

103 concrete also horizontaly in line and connecting to purline angle etc by welding 10 750.00 R.M.

rereting etc. (a) Medium duty "B" Class

Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in 1:1.5:3

104 concrete also horizontaly in line and connecting to purline angle etc by welding 10 485.00 R.M.

rereting etc. (a) Medium duty "B" Class

Providing & fixing black board on walls of 1.8mt.x1.2mt size made up to

mmth.B.W.P .Plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood

Stock or century) fixed with teak wood beading of 65 mmx 50mm size, rubbing

& sanding comp., incl. applying two coats of black board paint over a priming

coat on plywood & French polishing the frame all round etc. Comp. as

per instruction of Engineer in charge (M.R.)

Providing & fixing Green board on walls of 1.8mt.x1.2mt size made up to

mm th.ply (using IS 710 Marin ply) with 1 mm thick outside green board

& 0.8mm backside white laminate & with good Quality of adhesive

with appropriate fittings of Alluminium fittings or teak wood bedding 65 mmx

50mm size, rubbing & sanding comp., as per instruction of Engineer in charge

Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm thick

107 with appropriate fittings and Alluminium fittings comp., as per instruction 1 4,230.00 No.

of Engineer in charge (M.R.)

Providing & Fixing Reading table size 8' x 4' and height 2'-6" with table top

18mm thick (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century)

commercial plywood with 1.0mm thick lamination sheet fitting with teakwood

moulding table top supported on 3" x 3" teakwood leg & 3" x 11/2" teakwood

framing top and bottom with french polish labour work hardware etc. as per

site in charge instruction and as per drawing.

Providing & Fixing Librarian table with 18mm thick commercial plywood

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) )with

1.0mm thick lamination sheet table top supported on 2" x 2" teakwood leg &

make 3 nos. drawers of 1' 3" width on both side with necessary french polish

hardware labour etc. as per site incharge instruction and as per drawing ( Size

4' x 2'-6" x 2'-6", all framing other then legs are teak wood of size 2" x 1")

Providing & Fixing simple 12mm thick commercial plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) Rack of size 6' x4'

110 and depth 1'-6" 5 Nos. horizontal partition, supported 2" x 1" framing with 1 7,690.00 NO

necessary french polish hardware labour etc. as per site incharge instruction

and as per drawing.

Providing & Fixing fitting commercial 8mm thick plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) magazine stand of

Size 6' x 4' with 3" x 11/2" vertical supporting and adjustable lag support and

horizontal simple 2" x 1" teakwood patti for magazine support with necessary

french polish hardware labour etc.as per site in charges instruction and as per

SN ITEM Qty SOR 23-24 Unit Total

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing

112 with necessary accessories & stainless steel dash fasteners , stainless steel 10 450.00 Kg

bolts etc., of required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I.

113 or PVC pipes including the cost of cutting holes & making good the wall etc. -

Complete - 100 mm dia as per architect instructions.

(A) 40 to 50 mm dia 10 62.00 No.

(B) 75 to 90 mm dia 10 75.00 No.

(C) 110 mm dia to upto 150 mm dia 10 90.00 No.

(C) 150 mm to 200 mm dia 10 98.00 No.

Providing and constructing sandwitch type Polish Kota Stone cooking

platform 0.6 mt. wide & 0.75 mt. height, including one end side Polish Kota

stone (Double Polish) of 1.25 mt. height & front Polish Kota stone patti of

cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in

1:3 with finishing smooth with cement slurry as required and Stainless Steel

sink of 0.45 mt x 0.45 mt size of approved quality and make with required all

fitings & fixitures etc. comp as per instruction given by site in charge at

Providing and constructing sandwitch type Granite stone cooking platform

0.6 mt. wide & 0.75 mt. height, including one end side granite stone (Double

Polish) of 1.25 mt. height & front granite stone patti of 10 cm wide,

vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in

115 1:3 with finishing smooth with cement slurry as required and Stainless 5 3,128.00 Rmt.

0.45 mt x 0.45 mt size of approved quality and make with required all fitings &

fixitures etc. comp as per instruction given by site in charge at all floors.

(Basic rate of Granite Rs.1,200.00 / S.M.)

Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP /

PVC)at junction of brick work and RCC work or two dissimilar surfaces, at all

heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before applying

the plaster, including curing, scaffolding all complete as directed.

Providing and filling Epoxy grout of approved or suggested brand by

117 consultant / Engineer in charge in 4mm to 6mm thick tiles joint 10 40.00 Rmt.

including spacer with cleaning of joint by vacuum or blower etc

Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all equipments,

tools, material, labour, etc. Standard procedure as mentioned in

manufacturer's specifications shall be strictly followed, which shall be

submitted and got approved from the authority prior to start of work. The rate

shall also include cost of drilling of hole of required diameter and depth

as mentioned in manufacturer's specification, cleaning the hole with required

air blower and other necessary tools and tackles, positioning, providing

and grouting chemical, allied fixtures and fasteners, etc. but excluding the cost

of reinforcing bar etc. complete. Item includes necessary scaffolding,

staging, labour, tools and equipments, etc. complete as directed by the

engineer-in- charge.

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour and

material consistment with ISI specification. Using Chlordene and Chiorpurfiles

119 20 EC. As per 6131_paret-II Consentration Weight one percent is 10 82.89 Smt.

recommended i.e. one litre 20 EC chemical emulsion with 19 liter give

1% concrentration inclusive of one litre chemical emulsion appication at the

rate of 5 litre chemical / Sqm of surface is recommended as per IS.

Providing and fixing rolling shutters of approved make made of 80 mm wide

M.S. laths inter locked together through their entire lenght and jointed together

at the ends by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arrangements for inside and outside

locking with push-pull operation including the cost of hood cover and spring

etc. complete (A) Shutters having width below 3.5 M.

Providing and fixing rolling shutters of approved make made of 80 mm wide

M.S. laths inter locked together through their entire lenght and jointed together

at the ends by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arrangements for inside and outside

locking with push-pull operation including the cost of hood cover and spring

etc. complete. (B) Shutters having width 3.5 M and above

SN ITEM Qty SOR 23-24 Unit Total

Providing & Fixing 3 mm thick metal sheet with CNC cutting to fix it on

vertical surface.Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of red lead paint

in beams & joists channels angles, tees, flats with connection plates or angle

cleats as in main & cross beams, hip & trussed purlins connected to common

raffers & the like.

Providing and laying broken china mosaic flooring for terrace using 12mm to

20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain

123 or slope and to be tempered to bring mortar creme out upto surface 10 747.29 Sqm.

using white cement including rounding off junctions and extending them upto

15 cm along the wall clearing with water and oxalic acid etc. as directed.

Providing and Fixing Hollow steel Sections Framed Work including

124 Cutting, Hoisting, Welding & Fixing in position Purlin, Main Chord etc. as per 100 126.00 Kg

Engineer- in-charge.TATA / JINDAL / ASIAN Make

Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar

1:1 including neat cement finishing, watering etc. complete.

Apply two coats of putty and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other matter

and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

127 shade including throughly brushing the surface free from mortar 50 79.39 S.M.

droppings and other foreign matter and sand

papered smooth.

For every subsequent coat Extra over item no.above 50 33.72 S.M.

Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

Providing & applying two coats of weather shield max paint (3 coats may be

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian

Paint including applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease,

fungi, algae and flaking paint. This can be achieved by brushing with a wire/

stiff coir brush, followed by water jetting if required. Fill up all minor

cracks and defects with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly using wire

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m,

horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@ wt

1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm @1.398

130 kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 5 2,140.33 S.M.

1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @

0.456 kg/mt with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complete for window.

(A) Same as above but Colour anodized 5 2,140.33 S.M.

Providing and fixing window having extruded aluminium Powder Coated

section frame main outer size 95 mm x 24 mm x 1.17 mm (of jindal section

no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three track member size 92 mm x

31.75 mm x 1.30 mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical

member of size 92 mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @

131 Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mm x 18 5 1,591.87 S.M.

mm x 1.29 mm (of jindal section no:8947 @ wt. of

0.456 kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminium fittings & fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

(A) Same as above but Colour anodized 5 1,591.87 S.M.

SN ITEM Qty SOR 23-24 Unit Total

Providing and fixing window having extruded aluminium Powder Coated

section frame main outer size 63.50 x 38.10 x1.95 mm (of Jindal section

no.4605, @ Wt. 1.094Kg/mt) horizontal Two track member size 61.85 mm x

31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.)

vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt)

132 with sliding shutters of horizontal member size 40 mm x18 mm x 1.29 5 1,705.67 S.M.

mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical member of

size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947, @ Wt. of

Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick tranparent

bronze colour tineted float glass with powder coated aluminium fittings

and fixtures and transparent silicon sealant glass fixing to frame as per details

etc. complete for window.

(A) Same as above but Colour anodized 5 1,705.67 S.M.

Providing and fixing standared extruded ofalluminium section of size

63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated

alluminium frame for ventilation with

mm thick frosted glass as details etc complete for Ventilation

(A) Same as above but Colour anodized 5 2,414.00 S.M.

Providing and fixing standared extruded of aluminium section of size 61 x

x0.90 mm (of Jindal section no.14080, @ Wt. 0.471 Kg per mt) with

134 Powder Coated alluminium frame with 5 mm thick transparent bronze 5 2,336.00 S.M.

colour tinted float glass as

details etc. complete for fix window.

(A) Same as above but Colour anodized 5 2,336.00 S.M.

Providing & fixing partly panel & partly glass Powder Coated Aluminium

doors with aluminium section of Hindalco, Jindal , Narmada,Banco or

Equivalent approved make having Poder Coated outer frame Leg Partition

section of 63.50 mm x 38.10 mm having weight 1.158 kg. / R.M. shutter

section having size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and

middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881

kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal Section No.

Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid frogting and 12 mm

thick prelaminated sheet of Greenlam, Panama or archid make as approved by

Engineer-in charge including fixing brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized 5 3,237.00 S.M.

Providing & fixing Powder Coated Aluminium partly glazed and partly

panelled partition using medium duty sections of Hindalco,Zindal,

Narmada, Banco or Equivalent approved make having section 63.50 mm x

38.10mm ( Frame-.758 kg/rmt & Middle section- 0.819 Kg./rmt), Galzing

Clip with 5 mm thick clear float glass of approved make including all other

136 necessary fittings and fixtures. Entire work will have to be made water proof 5 2,400.00 S.M.

using necessary rubber sectioned wherever required. Gaps all round the frame

to be filled with approved water proof sealent. Bottom portion of doors both

side to be covered with 12mm thick prelaminated particle board of

make and quality and as per design.

(A) Same as above but Colour anodized 5 2,400.00 S.M.

Demolition including stacking of serviceable materials with all

lead and lift. (i)) RCC Work

Demolition of brick work and stone masonry including stacking of serviceable

materials and disposal of unserviceable materials with all lead and lift. (i) On

Removing and scraping of old deteriorated plaster of any thickness from wall /

RCC member including stacking of serviceable material and disposal of

unserviceable from site

of work with all lead and lift.

Dismentling steel work including distempering and stacking

the maerials with all lead and lift.

Dismentling door, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraces, holdfasts and other attacement etc. complete and

stacking them within all lead

and lift. (i) Not exceeding 3 Sq.M. in area.

Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys, Gutters etc.

stacking of serviceable materials and disposal of unserviceable materials with

all lead and lift. (i) G.I. sheet

143 Removing of Collapsible Gate 1 1,500.00 No.

144 Removing of Rolling Shutter 1 1,000.00 EACH

Dismentaling tiled of stone floors laid in mortar including stacking of

145 serviceable materilas and disposal of -

unserviceable materials with all lead and lift.

A Kota stone flooring and steps 5 47.72 S.M.

B Marble 5 47.72 S.M.

C Tiles flooring / Dedo 5 47.72 S.M.

D Granite flooring and steps 5 47.72 S.M.

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering,

ramming & consolidation etc. complete.

SN ITEM Qty SOR 23-24 Unit Total

Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm compacted

thickness over the base including necessary compaction, watering etc.

complete. Item includes leveling by using vibratory plates compacted

machine and as directed by engineer in charge.

Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse sand : 10-

148 hand broken stone aggregates 40 mm nominal size) and curing complete 2 2,517.44 C.M.

excluding cost of formwork in (A) Foundation and Plinth

Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x

380mm) purchased from SMC's approved paverblock manufacturer & setting

in line, level and in truly vertical position, including filling joints in C.M. 1:1 (1

part of cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of

cement : 1 part of coarse sand) including watering etc. complete and

as directed by engineer in charge.

Providing interlocking type Rubber moulded cement concrete paver block

of approved shape, design & colour having 60mm thickness (M-35) purchased

from SMC's approved paverblock manufacturer only & fixing of fine sand

150 bedding. Item includes levelling by using vibratory plates compacted machine. 10 524.00 S.M.

Item also includes all materials, labour, equipments, tools, plants, watering,

cleaning etc. complete.

Without colour 5 524.00 S.M.

Providing & laying Granular sub base (GSB)confirming to Grading-V of

Table 400.0 of compacted thick of 150mm with specified graded stone metal

and sand mixed in place and laid with mechanical means spreading with

motor grader and compacting with vibratory roller having minimum 80-

100 KN static weight to acheve desired density of 98% of MDD including

all material, labour, machinery with all leads and lift etc. complete.

Providing & laying cement concrete Pavement using 1:1.5:3 (1 cement:1.5

sand:3 graded stone agg. 20 mm nominal size) & Vaccuum Dewatering

technique including floating surface with a skim powder floater, curing etc.

Providing & laying cement concrete Pavement using 1:2:4 (1 cement:2 sand:4

153 graded stone agg. 20 mm nominal size) & Vaccuum Dewatering technique 1 5,245.25 C.M.

including floating surface with a skim powder floater, curing etc. complete.

Providing and laying 200 micron plastic sheet on prepared sub base For V.D.S

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness with

filling of epoxy sealent as directed by engineer in charge

RCC Core Cutting is about making precise, circular cuts for creating holes of

required diameters for Rehabilitation in civil works. The core drilling rod is

fitted with diamond pieces at the drilling end. The core cutting machine can be

used for both horizontal and vertical hole making purposes.

Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the

Tile Periphery for Extra Strength The Light weight calcium silicate

ceiling tiles shall have , light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation . The Light

weight calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of

0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal

157 level suspended inter locking metal grid of hot dipped galvanized -

steel sections (galvanizing @120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to get required

length and size of 24X38mm made from 0.30 mm thick (minimum)

sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along spaced between main

‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary

cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of the 1200X600mm panel

to form grid of size 600X600mm resting on periphery walls/partitions

on a perimeter wall angle pre-coated steel of size (24X24X3000mm made 20 1648.96 Sqm.

158 GYPSUM CEILING 50.00 958.58 Sq. Mt

SN ITEM Qty SOR 23-24 Unit Total

Supplying and Fixing of Suspended ceiling system components which includes

Single Layer Boarding with 12.5mm thick USG Boral Standard Plasterboard

This includes of USG Boral Thundersteel Perimeter Channel (0.50mm thick

having one flange of 20mm and another flange of 30mm and a web of 28mm)

screw fixed to brick wall/partition with the help of approved screws at 600mm

centers. Then suspending of USG Boral Thundersteel Intermediate channel

(45mm x 0.90mm thick with two flanges of 15mm each) from the soffit at

1220mm centers with of USG Boral Thundersteel Ceiling Angle

(25x10mmx0.50mm thick) fixed to RCC Slab with of USG Boral Soffit Cleat

(37x27x25x1.6mm thick) and 8mm dia 40mm long Anchor Fastener @ 600mm -

Centers, respectively. USG Boral Thundersteel Ceiling Section (having web of

51 mm and two flanges of 27mm each) are then fixed to the of USG Boral

Thundersteel Intermediate channel with the help of connecting clip (2.6mm

Dia) and in perpendicular direction to the USG Boral Thundersteel

intermediate channel at 457mm centers. USG Boral Thundersteel profiles are

rolled with AZ Steel (150 GSM & 310 MPa Yield Strength) having base metal

conforming to IS 513:2016 as per IS 15961:2017/ AS 1397:2001).12.5mm

thick USG Boral Standard Plasterboards (confirming to IS 2095 Part 1) is screw

fixed with 25mm long Drywall screws at 230 mm centers. The screw fixing of

gypsum boards to the metal framing at the periphery, openings and cut edges -

159 CEMENT SHEET CEILING 50.00 1248.00 Sq. Mt

Providing and fixing of Cement sheet ceiling using aluminium channel & pipe,

screws etc. complete with all material, labour with all lead, lift and transport.

and finished by approved shade of plastic paint (Basic Rate for 8 mm plain

cement sheet : 35 rs./sqft.)and finished and complete the work satisfactorily as

per instruction of architect or Engineer-in charge And as per " Architecture"

160 Providing and fixing -

(A) 40 mm thick RCC cover for simple chamber,s.w.trap & tank Top 5.00 400.00 No.

(B) PVC water tank cover upto 2000 Lit. 5.00 200.00 No.

Providing and Replace door, Window S.S. Fixtures fix in wooden / Alluminium

(A) S.S. Stopper 60 Cm long of ASIS 304 5.00 363.77 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 5.00 182.32 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 5.00 127.53 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 5.00 218.26 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 5.00 327.83 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 5.00 400.58 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS 304 Grade 5.00 54.78 No.

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 5.00 76.17 No.

(I) S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade 5.00 873.05 No.

(J) Inter Lock [Kadaka lock] 5.00 209.71 No.

(H) Locks Godrej Mortice lock cover 5.00 329.63 No.

(I) Door closers arrow type with spring 12 length as approved sample (30 cms) 5.00 479.33 No.

(J)Handle for doors Windows Cupboards etc. Brass 15 cms. Length 5.00 59.91 No.

(K) S.S. Door / window hinges 4x1"x1" 5.00 54.78 No.

Providing & fixing water proof plywood (ISI marks 710 grade) at the

162 door,window and any space in the building. necessary hardware,screws -

materials etc. complete as per instruction by engineer in charge.

Providing & laying Non reflective solar contact film for fixing on glass as

163 approved colour,design,cutting complete as per instruction by engineer in 50.00 406.57 S.M.

Providing & fixing Glass Table Top using 08mm th.clear glass with crystal edge

164 & necessary hardware materials etc. complete as per instruction by engineer in 5.00 1350.00 S.M.

Removing & resetting existing readymade c.c. kerb stone of required size &

thickness in line .level and in truly vertical position including filling joints in

165 C.M. 1:1 (1 part of cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 50.00 56.00 R.M.

part of cement : 1 part of coarse sand) including watering etc. complete and as

directed by engineer in charge. (M.R)

SN ITEM Qty SOR 23-24 Unit Total

Removing and Resetting of Paver block of walk-way with necessary sand /

166 pana filling and make in line and level with necessary vibrating using 50.00 102.00 S.M.

compactor machine.

Providing and fixing hard drawn steel wire fabric 75mmx25mm mesh or

167 weight not less than 7.75 kg.per Sq.M. to window frames etc. including 60x 10.00 762.20 S.M.

20mm beading of teak wood.

Providing & fixing G.i mesh 25X25X3mm used for celling repair fixed with

168 celling rebar column as per directed by enginner incharge rate excluding the 10.00 546.00 S.M.

Providing and filling the expansion joint by polymer confirm to BS4254-1983

as per required shade and specification by making groove of 50 mmx12.5mm

169 lather by cutting or by repairing groove and removing mortar dropor anyother -

foreign materials including applying primer and filling required size (over size

of joint PU foam etc. complete.)

Cutting out cracks of roof terrace to V- section , cleaning out, wetting

170 grouting with cement and sand slurry 1:3 (1-cement 3-sand ) 100 65.23 Rmt

Cutting out cracks roof terrace to V-Section cleaning out and filling

171 solidly with a hot mixture of bitumen and clean dry sand (1:1 by weight) 100 76.04 Rmt

Anti-Termite System:Providing and laying of permanent piping

technology anti-termite treatment before flooring work by installing LLDP

(Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D.

with inbuilt pressure compensation chip every 30 cm interval in the

tube, having working pressure of 2 Kg/cm2 and release rate of

Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at the

entire periphery of the building and at internal network of building at a

depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c distance (adjusted

as per building layout ) & Ends of loop pass through a PVC elbow of

minimum 32 mm ID at junction box of wall and floor level, entering into

a steel reinforced grooved flexible pipe of minimum 22 mm ID leading

into junction box and the loops shall terminate in junction boxes & test

Providing & applying two coats at all floor levels on new steel other metal

surface with epoxy paint, brushing interior to give an even shade incl. cleaning

the surface of all dirt, dust & other foregin matter etc . Comp. (A) For all type of

steel structure for all floor.

Contractor Sign EXECUTIVE ENGINEER

SOUTHZONE-B(KANAKPUR)

SURAT MUNICIPAL CORPORATION