OUTSOURCING SERVICES OF WATER SUPPLY INSTALLATIONS DISTRIBUTION SYSTEM AND PUMP HOUSES NO 37, 12, 28 AND 32 UNDER GE WEST BAREILLY

Amount

Outsourcing of services of following pump houses by providing skilled operator for opertion, round the clock in three shifts of 8 hrs each at pump houses for operation of submersible pumping set and Diesel Generating Set (including operation of valves control pannel, starters etc) chloronome plants and bleaching dozer, filing of water in OH tank /reservoirs etc of following capacities and pump houses mentioned in suceeding paras herein including maintaining chlorination 2 PPM at source mentioned herein after :-

PH No. 37 MAP ADF GATE

(i) Submersible pumping set 30 HP discharge 2700 LPM -01 No

(ii) DG Set make Kirloskar capacity 125 KVA -01 No

(iii) Chloronome plant make JESCO -01 No

(iv) Booster pump 2 HP -01 No

(v) Chemical Dosing System. Make: Aquafit - 01 Set

(vi) OH tank 25000 Gallon 02 No

PH No. 12 (Fort Road)

(i) Submersible pumping set 41 discharge 3200 LPM -01 No

(ii) DG Set make Kirloskar capacity 63 KVA -01 No

(iii) Chloronome plant make JESCO -01 No

(iv) Booster pump 2 HP-01 No

(v) Chemical Dosing System. Make: Aquafit - 01 Set

(vi) OH tank 1 Lakh Gallon 01 No & 50000 Gallon( 2 Nos) - 01 No

PH No. 28 (Near HQ UB Area)

(i) Submersible pumping set 41 HP discharge 3200 LPM-01 No

(ii) DG Set make Kirloskar capacity 63 KVA -01 No

(iii) Chloronome plant make JESCO -01 No

(iv) Booster pump 2 HP -01 No

(v) Chemical Dosing System. Make: Aquafit - 01 Set

(vi) OH tank 1 Lakh Gallon- 01No

PH No. 32 (Near CWE Office)

(i) Submersible pumping set 41 HP discharge 3200 LPM -01 Nos

(ii) DG Set make Kirloskar capacity 125 KVA,-01 No

(iii) Chloronome plant make JESCO -01 No

(iv) OH tank 25000 Gallon - 01 No

(v) Chemical Dosing System. Make: Aquafit - 01 Set

Outsourcing of services by providing two skilled pipe fitter for attending day to day maintenance of external water supply complaints under GE (West) Bareilly in day shift i.e. 0900 hrs to 1700 hrs excluding Sundays by maintaining all repair/rectification of leakages/blockage to water supply distribution lines by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket, nipple, repairing joints by cooking and inserting spurn yarn and run lead joints as per site requirement, attending and clearing of all no water supply complaints, carrying out washout of all external pipe lines & have to entire clean and clear water supply at user's end of GE (W) Bareilly complete all as specified and as directed. Notes :- (a) Repair/Replacement of spare parts/fittings will be measured and paid under relevent items. (b) A register to be maintain by contractors rep and get it sign by users in confirmation of clear water supply of entire cantt area (location wise) of GE (W) Bareilly. (c) The contractor shall provide the one set of pipe fitter tools (comprising of following) to each pipe fitter for attending day to day complaints. (i) Pipe wrinch set comprising of 10', 12', 14', 18' (ii) Spaner Set (iii) Die Set comprising (15mm, 20mm, 25mm, 40mm & 50mm) (iv) Hammer,Chisel and Hasksaw (v) Gaiti, Spade (Faura) and Bucket (vi) Screw Driver 15'

Notes: -

Contractor shall keep the following aspects in mind while quoting unit rates and rates quoted shall be deemed to be including the following: -

(a) Operator should be holding ITI certificate with experience in relavent fields for operating pumps, DG sets, Chloronome Plants and bleaching dozers and Pipe Fitter with experience in maintaining all external water supply pipe lines and distribution lines .

(b) Operator should not be deriving pension from any Govt/semi Govt or public sector undertaking. Any disputes will be at discretion of GE and decision shall be binding on contractor.

(c) Operator shall posses, police verification certificate.

(d) Contractor shall be responsible for safety, security and upkeep of installation as per MES standards for installation.

(e) Contractor shall provide operator at the rate of three shifts a day i.e.

(i) 1st shift - 0600hrs to 1400 hrs

(ii) 2nd shift -1400 hrs to 2200 hrs

(iii) 3rd shift - 2200 hrs to 0600 hrs

(f) Contractor shall provide pipe fitter at the rate by providing two Skilled Pipe Fitter in a day i.e. 0900h - 1700hrs and report to JE/MCM at water supply complaint cell daily basis.

(g) Duty roster for one month will be prepared in advance and displayed at prominent places in installations and water supply yard to include names, shifts and residential address, contact Number etc. Operator reserve for leave/sickness etc shall also be provided and dispalyed on duty roster / register.

(h) Contractor shall stop leakage from glands or coupling joints etc in the pump house premises.

(j) Contractor shall ensure through operator for day to day upkeep and check of pumping set as per manufacturers instructions and carry out minor repairs of following nature by own arrangement to the satisfaction and direction of Engr in Charge :-

(i) Glands

(ii) Greasing

(iii) Dusting of plant & machinery.

(iv) Weeding/ rooting out grass roots, vegetation etc.

(v) Contractor shall carry out pre monsoon maintenance of pumps to the satisfication of Engr-in-Charge.

(vi) DHPP(N) will be supplied by the department

(vii) Log sheet of DG set as well as pump should be provided by the contractor & to be employed by the contractor maintained by the operator employed by contractor.

(k) Contractor shall ensure through operator running of chloronome plant or bleaching dozer including maintaining chlorination at 2 PPM by operation of chlorination valve. Chlorine testing kit shall be provided by the contractor & rates are deemed to be included in the quoted rate.

(l) Chlorinated water shall be supplied to overhead tank through operation of valve provided at site.

(m) Water supply & pumping distribution timings are as under :-

(i) Water supply to OH Tank and operation of pump

0300 hrs to 0900 hrs

1100 hrs to 1500 hrs

1500 hrs to 2200 hrs

(ii) Distribution Timing

0600 hrs to 0800 hrs

1200 hrs to 1300 hrs

1800 hrs to 2000 hrs

(iii) Any change shall be notified by Engr-in-charge and adhered to by operator

(q) Log sheet provided at pump house shall be maintained and handing/taking between continuous operator shall be done correctly as per norm of MES.

(r) Emergencies shall be notified to Engr in Charge/JE/MCM. Routine operation should be under supervison of MCM designated by Engr-in-Charge.

Supply only Medium Grade GI Elbow (ISI marked) of following sizes complete all as specified and directed.

(a) GI Elbow 15 mm

(b) GI Elbow 20 mm

(c) GI Elbow 25 mm

(d) GI Elbow 40 mm

(e) GI Elbow 50 mm

Supply only Medium Grade GI Socket (ISI marked) of following sizes complete all as specified and directed.

(a) GI Socket 15 mm

(b) GI Socket 20 mm

(c) GI Socket 25 mm

(d) GI Socket 50 mm

Supply only Medium Grade GI Union (ISI marked) of following sizes complete all as specified and directed.

(a) GI Union 15 mm

(b) GI Union 20 mm

(c) GI Union 25 mm

(d) GI Union 40 mm

(e) GI Union 50 mm

Supply only Medium Grade GI Nipple (ISI marked) of following sizes complete all as specified and directed.

(a) Nipple GI 20 x 150 mm

(b) Nipple GI 20 x 75/100 mm

(c) Nipple GI 25 x 150 mm

(d) Nipple GI 25 x 75/100 mm

Supply only 'D' Joint of following sizes complete all as specified and directed.

(a) D Joint of 80 mm

(b) D Joint of 100 mm

(c) D Joint of 150 mm

(d) D Joint of 200 mm

Supply only Gun metal gate valve of following sizes as specified and directed. Make : NMV, ZOLOTO, LEADER

(a) Gate valve of size 50 mm.

(b) Gate valve of size 40 mm.

(c) Gate valve of size 25 mm.

(d) Gate valve of size 20 mm.

(e) Gate valve of size 15 mm.

Supply only Medium Grade GI Socket Reducer (ISI marked) of following sizes complete all as specified and directed.

(a) GI Socket Reducer 25 -20 mm

(b) GI Socket Reducer 20 -15 mm

(c) GI Socket Reducer 40 -25 mm

Supply only Medium Grade GI Plug Top (ISI marked) of following sizes complete all as specified and directed.

(a) GI Plug Top 20 mm

(b) GI Plug Top 25 mm

(c) GI Plug Top 40 mm

(d) GI Plug Top 50 mm

Supply only Medium Grade GI Tee (ISI marked) of following sizes complete all as specified and directed.

(a) Tee 20 mm

(b) Tee 25 mm

(c) Tee 40 mm

Supply only Medium Grade GI Tee (ISI marked) of following sizes complete all as specified and directed.

(a) Tee 40- 25 mm

(b) Tee 25 -20 mm

(c) Tee 25 -15 mm

Supply only End Plate of 150 mm bore with rubber gasket complete all as specified and directed.

Supply only gland complete all as specified and directed.

Supply only spun yarn for rectification of leakage complete all as specified and directed.

Supply only bolt and nuts different sizes (as per site requirement) complete all as specified and directed.

NOTES :- 1.The time limit for attending the complaints for repair to water supply pipe lines and other misc jobs - within 01 day on intimation to the contractors by the department. 2. In case the contractor fails to attend/rectify the defects within the above time limit, penalty will the imposed as Rs 500/- per day. 3. The contractor or his authorised representative shall report to concered JE/MCM or the Engineer-in-charge at 0900 hours daily on all working days to receive order/instructions of the work or regular complaints. A register shall be maintained to record all orders & instructions and their complaints and is to be signed by the contractor/his representative and the Engineer-in -Charge / JE Concered.

D K THUKRAL AND SONS

M/S SARTHAK INFRASTRUCTURE AND ENGINEERS

AKHIL ENTERPRISES

M/S MAISUR CONSTRUCTION COMPANY PRIVATE LIMITED

RAZA ENTERPRISES

shahji contractors