Renovation of Type-IV duplex Qtrs. in CBRI Colony

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge :-Nominal concrete 1:3:6 or richer mix

Dismantling stone slab flooring / Dado laid in cement mortar marble chips flooring including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Providing skilled manpower (Plumber) for taking out the existing old fittings of various items, including stacking at specified space in the institute as per direction of Engineer-in-charge

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below

Providing and fixing water closet squatting pan (Indian type W.C. pan of make Hindware / Parryware / Somany or equal standard ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern of make Hindware / Parryware / Somany or equal standard, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan of make Hindware / Parryware / Somany or equal standard) with seat and lid, 10 litre low level white P.V.C. flushing cistern of make Hindware / Parryware / Somany or equal standard, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : European type W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin of make Hindware / Parryware / Somany or equal standard with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china pedestal of make Hindware / Parryware / Somany or equal standard for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete :- Flexible pipe 32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete :- 110 mm dia

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes:-110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion :- Bend 87.5°110 mm bend

Providing and fixing Rigid PVC pipes in the floor conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes : 75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion : - 75 mm bend

Providing and fixing ISI mark heavy duty G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete :15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank tripple layer, IS : 12701 marked (Syntax/Himgiri/Ganga or equal standard make), with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing brass stop cock(250 gm. weight) of approved quality:15 mm nominal bore

Providing and fixing ISI mark gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats, brass rod complete :15 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter

Providing and fixing C.P. brass bib cock (Make Hindware / Nivia / Zim or equivalent standard) of approved quality conforming to IS:8931 :15 mm nominal bore

Providing and fixing C.P. brass long body bib cock (Make Hindware / Nivia / Zim or equivalent standard) of approved quality conforming to IS standards IS:8931 :- 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) (Make Hindware / Nivia / Zim or equivalent standard) of standard design and of approved make conforming to IS:8931 :- 15 mm nominal bore

Providing and fixing C.P. brass angle valve (Make Hindware / Nivia / Zim or equivalent standard) for wash basin, cistern and geyser points etc. of approved quality conforming to IS:8931:- 15mm nominal bore

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering shuttering i/c strutting, propping etc. and removal of from for.

Suspended floors, roofs, landings, balconies and access platform

Weather shade, Chajjas, corbels etc., including edges

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level :- Cold twisted bars

Brick work in foundation of class designation 75 in Cement mortar 1:6 (1 cement :6 coarse sand)

Brick work in superstructure of class designation 75 in Cement mortar 1:6 (1 Cement : 6 coarse sand).

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing 18 mm thick Granite Stone gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels:- Granite of any colour and shade Area of slab over 0.50 sqm

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :Udaipur green marble

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make(Orient/ Kajaria/Somany or equal standard make double charged), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete :-Size of Tile 600x600 mm

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make(Orient/ Kajaria/Somany or equal standard make) in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make(Orient/ Kajaria/Somany or equal standard make), in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge : With cement mortar 1:4 (1 cement : 4 fine sand)

Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Renewing glass panes, with wooden fillets / Glass Puttins wherever necessary : Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Skilled labour (Carpenter)

Unskilled (Helper)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :-Kiln seasoned sheesham wood

Providing and fixing fly proof galvanized M.S. wire gauge to doors,windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 2nd class teak wood beading 62X19 mm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:-25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) : - Sal wood

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on old work.

Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture: on wood work (hard and soft wood)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.Two or more coats on old work

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:Old work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Applying a bond coat over roof surface with cement slury mixed with water and SBR latex/acrylic emulsion(Dr. Fixit / STP / Asian or equal make) with more than 35% solid polymer content (a certified in this regard shall be provided by the contractor) with minimum comsuption of 0.20kg with 1.6kg cement per Sqm applied with brush including prior surface cleaning with wire brush and removal of all dust and dirt, complete in all respect at site as per direction of Engineer in-charge.

Applying two coat of bituminous aluminium paint (super silver shield of Dr. Fixit / STP or equivalent standard make) on the existing APP sheet roof treatment by using appropriate brush manually including cleaning/ dusting of existing APP sheet surface etc. complete in two successive coats applied @ 0.25 litre per sqm.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :- 3 mm thick

Taking down carefully old electric point wiring, sub-main, Power Points fitting & fixtures including Angle iron frame, overhead sub-main from pole to quarter, meter, MCB DB etc. and shifting of old materials as required and directed by engineer -In charge

Wiring for light Point /fan point exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit I.S.I. marked, with Piano type switch, Phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable of Havell’s /Rallison/ Finolex/ Polycab/RR Kabels/KEI make I.S.I. marked 1100 volts grade including holder and ceiling rose as required for Group ‘B’ point.

Wiring for twin control light Point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit I.S.I. marked, with 2 way Piano type switch, Phenolic laminated sheet, suitable size M.S. box and earthing the point plate suitable G.I Box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable of Havell’s /Rallison/ Finolex/ Polycab/RR Kabels/KEI make I.S.I. marked 1100 volts grade as required

Wiring for circuit /sub-main wiring along with earth wire with the following sizes of FRLS PVC Insulated copper conductor single core cable of Havell’s /Rallison/ Finolex/ Polycab/RR Kabels/KEI make I.S.I marked 1100Volts grade in surface/ recessed PVC conduit, I.S.I. marked as required.

2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire.

2 x 4 sq.mm + 1 x 4 sq.mm earth wire.

4 x 10 sq.mm + 2 x 10 sq.mm earth wire.

Supplying and fixing metal box of 150mmx75mmx60mm deep(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 Amps piano type socket outlet and 5/6Amps piano type switch ISI Marked including connections, painting etc as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 Amps piano type socket outlet and 15/16Amps piano type switch ISI Marked including connections painting etc as required.

Supplying and fixing stepped type electronic fan regulator on the existing switch box including connections etc. as required.

S/F Call bell suitable for DC/AC including bell push button single phase 230 Volts complete as required.

S/F of water tight obolong bulkhead fitting of approved make complete with prismatic glass holder rubber gasket, G.I. guard etc. complete as required. as approved by Engineer in charge.

Supply and Fixing 4Way double door surface/recess mounting vertical type 415 volts TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bars, common neutral link, earth bar, din bar for mounting MCB’s (But without MCBs and incomer MCCB)of Havells make model LOAD LINE or its equivalent of Legrand/ABB /L&T/ Sciemense Make including painting earthing etc. as required and directed by Engineer-in Charge

Supplying and fixing 5 A to 32 A rating 240/415 V 10 kA “C” curve MCB suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing 100 amps 16 KA rating and breaking capacity three pole MCCB with thermomagnetic release and spreaders in existing cubical panel board including drilling holes in cubical panel making connection etc. including testing and commissioning. as required by Engineer-in charge of Legrand/ Havells /L&T/ Sciemense Make make.

Earthing with G.I earth plate 600mm x 600mm x 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt complete as required.

P/F 6SWG dia G.I wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub-main wiring/cable as required.

Laying of one number PVC insulated and PVC sheathed/ XLPE aluminum conductor power cable of 1.1 KV grade of following size directed in ground 750 mm deep, including excavation, sand cushioning, side&top brick protective covering and refilling of trench etc. as required. Up to 35 sq.mm.

Laying and Fixing of one number PVC insulated and PVC sheathed/ XLPE aluminum conductor power cable of 1.1 KV grade of following size on wall surface as required. Up to 35 sq.mm (clamped with 1 mm thick saddle)

Supply for laying in existing trench PVC insulated and PVC sheathes XLPE armored heavy duty 1100 volts grade Hevell’s/polycap/ Gemscab make ISI marked aluminum conductor electric cable including connection testing etc complete in all respect as required and directed by engineer In charge of size 4 core x 16 sq.mm.

Supplying and Fixing 10-60 Amp. 3 Phase ISI Marked electronic energy meter with LCD display direct reading made in poly carbonate housing of HPL-SOCOMEC make type PPEM-01 installed in CRCA Sheet steel enclosure (including sheet steel enclosure of size 300 mm deep x 260mm width x 360 mm height) made out of 2 mm thick hinged type front openable with locking & sealing arrangement sheet cover covering the meter ( only reading display shall be visible) including making provision support, Din channel and space for mounting of three phase meter on 6 mm thick backlite base, i/c interconnections with FRLS insulated copper conductor wire of suitable size earthing , powder coating etc ae required

Supplying and making indoor end termination with brass compression gland and aluminum luges for 4 x 16 sq.mm (28 mm) size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required.

Supply and fixing 1400 mm sweep double ball bearing type heavy duty ceiling fan of Havells make model velocity/velocity HS or equivalent of cinni/ crompton make complete in all respect as required and directed by the Engineer –in-charge.

S/F of single light wall breaket on matching M.D.F.E.G board base etc. complete in all respect.

Supplying and fixing following Piano type switch/ socket on the existing switch box/cover including connections etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

M/s. Dev Associates

RAKESH KUMAR

Alankar Traders

AARIF CONTRACTOR

aron water proofing and pest control

M.K. CONSTRUCTION

ASMA CONTRACTORS

Hashim Hussain And Sons