SPECIAL REPAIR TO ROOF AND FALCE CEILING AT BLDG NOS NP 52 1 AND NP 54 2 PROVN OF INTERLOCKING TILES AND CERTAIN MINOR WORKS AT MIL STN DHRAANGADHRA

Amount

Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

Removing excavated material (soil), not exceeding 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

M&L for hard core of gauge not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, spread, levelled and rammed to a true surface including watering complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-2, using 40 mm graded stone aggregate as in foundation, filling, Bed blocks and mass concrete complete all as specified and directed. Note:- Volume of column embedded in PCC shall be deducted for payment purpose.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

S&F, Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long exceeding 12mm but not exceeding complete all as specified and directed.

M&L for MS rolled sections (Fe 410-W (Gde-E-250) quality-A) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including one shop coat of zinc chrome primer complete all as specified and directed.

S&F, mild steel sheets/plates of Fe-410-W (Gde-E-250) quality - A (plain or chequered), forming holes/welded to frame work, as in valve pit cover complete all as specified and directed.

S&F, MS angle iron Fe-410-W (Gde-E-250) quality A in framed work for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc incl one shop coat of zinc chrome primer complete all as specified and directed.

S&F, pre-painted galvalume aluminium zinc coating GI based manglore pattern corrugated steel sheet, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F, pre-painted galvalume aluminium zinc coating GI based plain steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 100mm thick cement concrete (1:2:4), type B-2 (using 40mm graded stone aggregate) as in hard standing, laid in alternate bays and finished surfaces even and smooth using extra cement complete all as specified and directed .

M&L for 100 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/hard standing, path and finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L, for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 25mm thick sand cushion below paver blocks complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on walls/ floors surfaces mixed with using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, finished even and smooth without using extra cement to receive WPT complete all as specified and directed. Note:- Supply only water proofing compound shall be measured and paid separately.

M&L for preparing of new plastered or un-plastered wall surfaces and applying two coats of oil bound distemper over and including chalk whiting on plastered surfaces, preparatory to distempering complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old plastered or un-plastered surfaces of wall and applying two coats of exterior paint over one coat of primer complete all as specified and directed. Make - Apex of Asian Paints or equivalent.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Supply, fixing and installation of office compactor complete set of size 1.20 x 0.50 x 2.00mtr), superior and prime quality of steel (Powder coated) with wheel and rail and base frame made of channel and angle section including suitable shelves for office files and books etc and lockehead for entire system with single locking operation, stoppers, anty dust solution with long durability complete all as specified and directed. Make - Methodex or equivalent as approved by GE.

S&F, Refrigerator, 320 Ltr, latest higher star rated as available, double door, frost free, suitable for operation on 230 Volt AC supply, with model features complete with all standard accessories i.e. vegetable crisper, fruit crisper, freezer lamp, internal micom, catch in deo clonizer, humidity control, with 3 core copper flexible wire 650/1100V grade round cable duly fitted with a 3 pin plug top 5 Amps and testing complete of make approved by GE from the make specified in Appx 'C', complete all as specified and directed.

M&L for Forming 12 mm thick ex pansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Dismantling timber scantling in framed work, 40 sqcm and over in section in any position complete all as specified and directed.

Dismantling timber scantling in framed work, 40 sqcm and over in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section in any position complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc.) sheets in roof covering complete all as specified and directed.

SNEH TRADERS

Shree Builders

Priya Construction co.

M/s PATEL ENGINEERING

Ramdev and Sons

Navkar Enterprises

DMA PROJECTS