PROVISION FOR STORAGE SHED SENTRY BOX FLAG POST AT CNAI EAST VISAKHAPATNAM

Amount

SCHEDULE 'A' PART-I: B/R WORKS

Excavation over area, not exc 1.5m deep for laying foundation etc in soft/loose soil and getting out complete all specified and directed.

Excavation over area, exc 1.5m but not exc 3.00m deep for laying foundation etc in soft/loose soil and getting out complete all specified and directed.

Returning filling in including spreading, leveling, watering & well ramming in layers n. exc 25cm thick complete all as specified and directed.

Removing excavated surplus soil to a distance not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed.

M&L PCC 1:4:8 type D-2 ( with using 40mm graded stone aggregate) in foundation filling and mass concrete, complete all as specified and directed

M&L for TMT bars 10mm dia and over, cut to length bent to shape required, including cluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips.

All as per Srl item No 6 above but 8mm dia and over upto 10mm in stirrups, spacers and binders complete all as complete all as specified and directed.

M &L for RCC M-30 (design mix) using 20mm graded stone aggregate, as in foundation including raffs footing, foundation beams, plinth beams for column etc complete all as specified and directed.

M &L for RCC M-30 (design mix) using 20mm graded stone aggregate, as in columnss, pillars,piers,post and struts completes as as specified and directed.

M&L for formwork to edges of concrete foundations footings, base of columns, plinth beams and similar wok with rough finished surfaces completes all as specified and directed.

M&L for formwork to sides of column, pillars posts, struts piers etc with finish surfaces complete all as specified and directed.ed.

M&L rolled sections as in main and cross beams , hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe-290 (Gde-165) complete all as specified and as directed.

S&F for roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

S&F MS work joist, channel, angle or tee sections fixed independently without connecting plates etc. confirming to Fe 410-W( Gde E-250) Quality A.

M &L for Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc. confirming to Fe 410 -W (Gde- E- 250)

S&F 1.00 mm thick plain pre painted galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed ) with grade of zink coating 275.

S&F for pre painted galvaliume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and a directed by Engineer-in-Charge.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified by Engineer-in-Charge.

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M & L 15 mm thick rendering on fair faces of brick work/concrete surfaces in cement mortar 1.4, surface finished even and fair without using extra cements complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces.

Formwork to sides of pillars,posts, struts,piers, columns and stanchions for fair finished surface complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface complete all as specified and directed

Formwork to chullah hoods, chajjas,troughs and similar items includingedges fair finished surface complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface complete all as specified and directed.

M&L RCC M30 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L RCC M-30 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L RCC M30 as in chejjas complete all as specified and directed.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not proivded for in Item 159, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directing

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4

Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement)

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces using integral water proofing compound 3% by weight of cement and finishing the surface even and smooth without using extra cement complete all as directed and directed. Note:- WPC shall be measured and paid saperately.

Supply only integral water proofing compound complete all as specified & directed.

M&L for 5mm rendering thick in CM (1:3) on ceiling sufaces, finished even & smooth (without using extra cement), complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash complete all as specified and directed.

M&L for two coats of Oil bound distemper including prepration of newly plastered wall surface over 1.50 mm thick wall care putty etc complete all as specified and directed.

S&F for anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S& F for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S & F for anodised aluminium grill (anodised transparent or dyed to required shade ccording to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

S & F for galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.8mm and fixed with tinned tacks or galvanized wire staples or wooden bead complete all as specified and directed.

Supply & fixing for frosted glass / tined glass 4.8 mm thick glazing in aluminium frames and ms pre coated frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed.

M & L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 100mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate in floor sub base

M&L 25 mm thick cement concrete in flooring type B1, 1:2:4 (20 mm graded aggregate) screed bed below floor tile

M & L for machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M & L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete incl 20 mm thick screed bed 1:6 CM in floors.

S & F 2nd class factory made hard wood as in plain straight chowkats and frames, wrought, framed, rebeared on the solid, rounded or chamfered, but together with glue pinned at joints, etc complete all as specified and as directed.

M & L for 2 nd class hard wood factory made 35mm thick plain framed pannelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for strainless steel butt hinges of 100 mm size cold rolled mild steel medium weight, ISI marked complete all as specified and directed.

Supply and fixing 200mm size mild steel barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed.

Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

M & L for preparation new or prevously untreated surfaces of wood and wood based material of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever equired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

SCHEDULE 'A' PART-II: E/M WORKS

M & L For Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through PVC Conduit concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made out of 1mm thick GI Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light Point / Fan Point /bell pointcontrolled by One Switch with all accessories complete all as specified. [Note- The PVC Conduit to Concealed in wall through cutting,Chassing,Pining in making good surfacing where required and pointing in cement mortar and making good for same unit rates are inculded for same]

Description all as per item No. 61 above but for 5/6Amp switch socket out let, independent board complete all as specified

Description all as per item No. 61 above but for 15/16Amp switch socket out let, independent with 4.0sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified

Supply and fixing of Socket, 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified.

Supply and fixing of Socket 6A/16A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified.

Supply and fixing Modular switch 1 way 6A, 1 module single pole complete all as specified and directed by Engr-in-charge.

Supply and fixing Modular switch 1 way 16A, 1 module single pole complete all as specified and directed by Engr-in-charge.

Supply and fixing ceiling rose surface bake lite 65 x 30 mm with 3 terminals complete all as specified and directed by Engr-in-charge.

S & F 4 feet long LED batten tube light fittings surface and wall mounted with aluminium housing and integrated electronic driver of minimum 1800 lumens (18-20 Watt) of cool white / warm comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

S & F Air Circulator wall mounted fans decorative type 230 volts single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified and directed by Engg-in-Charge.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed

S & F Building Security light LED type of minimum 35 Watt Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing post top lantern LED type 36 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed

Supply and fixing of Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall),SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete all as specified.

Supply and fixing of Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall),SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete all as specified.

Supply and fixing of MCB 6 to 32Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified

Supply and fixing of MCB 6 to 32Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, , complete all as specified

Supply lay and testing of cable in trenches/walls XLPE insulated, armoured electric cable (heavy duty 1100 volt grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed by Engr-in-charge.

Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified

Removing excavated surplus soils meterial not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

Material and labour for natural river sand as cushioning of cables, including spreading and punning down complete all as specified and directed by Engineer in charge. Note : punned thickness shall be measured for payment purpose

Supply and laying in trenchesold site bricks common burnt clay sub class 'B' complete all as specified & directed

Material and labour for 50 mm dia GI steel tubes 'light grade' for cable protection including sealing both ends complete all as specified and as directed by Engineer-in-charge.

Material and labour for cutting existing road/PCC/drain for laying of underground cable and including necessary earth work and making good to match with the exisitng surface with PCC1:3:6 type CI using 20mm graded aggregates complete all as specified and as directed.

M&L for sub main wiring with 2 run of 2.5 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 1.5 Sq mm drawn through PVC surface/concealed conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified and directed by Engg-in-Charge. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls if needed and making good the disturbed surface are included in the quoted rate.

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with Galvanize earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No 5, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel complete all as specified and testing on completion.

M/s Sai Venkata Durga Constructions (BID ID -3363362)

M/s KAMADHENU ENGINEERING CONSTRUCTIONS (BID ID -3363746)

PRASAD INFRAS (BID ID -3363708)