SPECIAL REPAIR/ REPLACEMENT OF FEEDER PILLAR BOXES, LT/HT EQUIPMENT, XLPE UG CABLE AND OTHER EXTERNAL ELECTRIC SUPPLY RELATED AT GE (A) AHMEDABAD

Fabrication, supply, installation, testing and commissioning electrical cubical control panel board ( KIOSK TYPE ) Double door, CPRI approved an ISO 9001 factory assembled made out door pedestal type feeder pillar box wheather and vermin proof fabricated of 3.0mm CRCA MS sheet of Suitable size,3 phase 4 wire 415 Volt ac 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals with suitable rating aluminium strips for incoming/outgoing MCCB's including and Mounting measuring instrument such as Volt meter, Ammeter, Selector switchs, CT's -03 Set, Phase indicator lamps with holder , toggle switches and MCBs etc including incoming and outgoing cables connections with suitable cable glands and end termination including grouting of feeder pillar box 60 cm above ground level by providing 105 cm long angle iron size 50x50x6mm welded onall four corner embedded in PCC (1:2:4) using 20mm graded upto 45cm complete all as specified and directed. ( Feeder piller box shall be consisting the following) (a) 4 Nos electrolytic aluminium bus bars high conductivity aluminium alloy proper insulated of 1 ½ times of the incoming capacity with provision of extension and mounting on porcelain support (b) MCCB FP 250 amps, 35 KA, 415 volts, 50Hz (Adjustable type) = 01 No (Incoming) (c) MCCB FP 100 amps, 25KA , 415 volts, 50Hz (Adjustable type) - 06 Nos (Outgoing) (d) Digital Panel mounted Amp meter 96 mm square type complete with selector switch complete with suitable size of CT's - 01 Set (e) Digital Panel mounted Volt meter 96 mm square type complete with selector switch - 01 Nos (f) Insulated Aluminium bus bars of suitable size shall be provided from the main bus bar to the out going MCCBs. (g) RYB indicating lamp, LED type - 01 sets. (h) Cost of PCC for foundation is deemed to be included in quoted rate by the contractor. (i) Drawing shall be approved by GE before placing the order.

Material and labour for servicing, repairing and welding to out door LT Panel / LT Feeder Piller box by (i) Cleaning with blower, (ii) Cleaning with CTC/Petrol (iii) Replacement of damaged copper/aluminium lugs (iv) Replacement of deteriorated copper wiring with existing sizes of cable (v) Cleaning and tightening of MCCB terminals (vi) Replacement and fixing of sheared rubber beadings (vii) Rectifying of loose connections of incoming and outgoing cables (viii) Painting two coat of smoke gray colour over one coat of primer and black paint on base channel after rubing with emery paper and making smooth finishes by using spray machine inclusive of writing SM / MES No / name of feeders etc. (not exceeding of height 5 cm each) (ix) Providing of door locking arrangement with of sliding bolts on panel door (x) Proper welding of Panel door/roof as required (xi) Connecting / cleaning of earth wire /earth strip (x) Two coat of white distemper on foundation.

S&F MCCB Four pole 250 Amp, 36/35kA, 415 V, Fixed Thermal-Magnetic type complete all as specified and directed

All as above item 3.00 but rating FP 200 Amp, 36 kA, 415 volt complete all as specified and directed

All as above item 3.00 but rating FP 160 Amp, 36 kA ,415 volt complete all as specified and directed

All as above item 3.00 but rating FP 125 Amp, 25 kA, 415 volt complete all as specified and directed

All as above item 3.00 but rating FP 100 Amp, 16 kA, 415 volt complete all as specified and directed

All as above item 3.00 but rating FP 63 Amp, 16 kA, 415 volt complete all as specified and directed

All as above item 3.00 but rating TP 100 Amp , 16 kA. 415 volt complete all as specified and directed

S&F MCCB Four pole 630 Amp, 50kA Adjustable Thermal-Magnitc adjustable type complete all as specified and directed