Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.0 L
EMD Value
₹7,413
Closing Date
27 Oct 2026, 11:00 am6d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
ASSISTANT ENGINEER
ASSISTANT ENGINEER LSGD SECTION MARANGATTUPILLY GP
Annual Plan-MGPLY 2026-27 Proj No. 140/27-Elackad Homoeo dispensory maintenance-General Civil Work
2026_LSGD_867939_2
13/AE/LSGD/MGPLY/26-27
Open Tender
Civil Works - Buildings
Percentage
Marangattupilly
Please refer Tender documents.
7 documents required · 7 mandatory
₹655
₹7,413
Yes
19 Oct 2026
19 Oct 2026
28 Oct 2026
19 Oct 2026
27 Oct 2026
19 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Maintenance | |||||
| 1.001 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 46.17 | kg | 845.94 | ₹39,057.05 |
| 1.002 | 50.12.5.1:Providing and fixing false ceiling with e board classic tile or equivalent make of size 610x610x4 mm ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 16.2 | sqm | 793.83 | ₹12,860.05 |
| 1.003 | OD119207/2026-2027:Fly proof wire mesh | 1.62 | sqm | 3,081.17 | ₹4,991.5 |
| 1.004 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 107.4 | kg | 544.2 | ₹58,447.08 |
| 1.005 | 21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 27.69 | kg | 666.93 | ₹18,465.29 |
| 1.006 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 24.49 | sqm | 1,210.26 | ₹29,635.64 |
| 1.007 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 8.56 | sqm | 1,278.82 | ₹10,947.98 |
| 1.008 | 50.9.15.3:Providing and fixing iron hooks and eyes : 200mm. | 2 | no | 19.84 | ₹39.68 |
| 1.009 | 50.9.15.5:Providing and fixing iron hooks and eyes: 100 mm | 4 | no | 15.19 | ₹60.76 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.60 MB
FormofTender.pdf
Tender Documents • 0.08 MB
Affidavit.pdf
Tender Documents • 0.09 MB
IPACT.pdf
Tender Documents • 0.01 MB
140SBD.pdf
Tender Documents • 1.83 MB
BOQ_1498754.xls
BOQ • 0.34 MB
EPAYMENT.pdf
Tender Documents • 0.02 MB
PA.pdf
Tender Documents • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .