SPECIAL REPAIRS AND UPGRADATION OF TOILET OF CERTAIN LOCATIONS, REWIRING OF P-509(ULH BAY), PROVISION OF NEW CROSS LINK FENCING, INTERLOCKING PATH, GATES AND ADDITION/ALTERATION TO PATHWAY UNDER EME SCHOOL BARODA.

Amount

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.

M&L for non skid coloured ceramic tile 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm , as in floors etc set over and including screed bed or bedding layer of mortar 15 mm thick with CM 1:4 including necessary adhesive (Tile pattern and decoration may be as suggested by Engineer-in-charge)

M & L for Glazed ceramic coloured walls tiles in vertical surfaces 300x450x 6mm to 7 mm thick set over and including rendering on vertical surface of wall or concrete surfaces in CM 1:3 to receive wall tiles including necessary adhesive (Tile pattern and decoration may be as suggested by Engineer-in-charge).

M & L for 18 to 20 mm thick machine cut green marble stone in single piece as in steps, landings, jambs, pillars, window cills, and like laid over cement screed and jointed with base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm thick plastering with cement mortar 1 : 3 including necessary adhesive complete all as specified

M & L Granite (of any type and colour) work (table rubbed and polished) 18mm-20 mm thick in wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and directed.

Rounding to edges of stone slabs such as steps, cooking platefrom and other similar situations complete all as specified

M & L for machine cut kota stone slab 20 - 25mm thick in support for wash hand basin platforms etc (the stone may be in one piece) including rubbing and polishing complete set over and rendering for screed bed on vertical surface of wall or concrete surfaces 10mm thick in CM 1:3.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5 sqm each

Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n.exc 4.0 sqm each

S&F of Powder coated aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F 4.00mm +/-0.20mm thick figured glass, pin head type and glazing with rubber beading or with glazing clips n exc 0.5, all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

M&L for 75mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed.

S & F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

S & F 150 mm size extruded aluminium alloy handles, febricated type anodised

S & F 250 mm aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) not less than 12mm dia with and and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium and fixed to wooden door shutters

S&F Factory made single extruded WPC (Wood polymer composite) solid door Frame/Chowkhat comprising of 62mmx32mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 KG/Cum and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/SS dash fasteners of required dia and length all as specified and directed.

S&F factory made 28-30mm thick single extruded WPC (Wood polymer composite) solid panel flush door shutter one side laminated with decorative choice and another side with white lminate of required size modulus of elasticity 850 N/mm^2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.

S & F 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.

S & F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

S & F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

M &L for Cutting chases in brick wall , pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth ,complete all as specified and directed

S & F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed.

S & F 110mm bore PVC (SWR) bends any radius all as specified and as directed.

S & F 110mm bore PVC (SWR) bends any radius with oval access doors all as specified and as directed.

S & F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed.

S & F 75mm bore PVC (SWR) bends any radius all as specified and as directed.

S & F 75mm bore PVC (SWR) bends any radius with oval access doors all as specified and as directed.

S & F in repair 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door all as specified and as directed

S & F in repairs 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door all as specified and as directed

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 110mm bore pipe all as specified and as directed

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 75mm bore pipe all as specified and as directed

S & F 110mm PVC (SWR) vent cowl all as specified and as directed

S & F 75mm PVC (SWR) vent cowl all as specified and as directed

S & F in repairs 15mm bore chromium plated fancy type bib tap long body, screwed down, high pressure for iron pipe or for brass ferrule

S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capston heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs stop valves/Angle valve15mm bore fancy type chromium plated screwed both ends for iron pipe or for unions and fixed

S & F in repairs 25mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed

S&F in repairs brass CP soap dish fixed to wall with brass chromium plated screws complete all as specified and directed. Make : Prayag & equivalent

S&F in repairs brass CP towel ring fixed to wall with brass chromium plated screws complete all as specified and directed.

S&F 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgf/cm2 as in waste pipe

Dismantling of water storage tank of 1000 ltrs capacity including ball valve complete.

S&F 1000 Ltrs Rotational modlded polyethylene water storage tanks four layered (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I

S & F Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screwed for iron pipe or brass ferrule and fixed

S&F in repair Vitreous China wash down water closet pan (Europion pattern), white (excluding fixing bolts, flushing cistern and flush pipe) squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor. complete all as specified and as directed.

S&F in repairs Plastic water closet seat, back, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair Vitreous China urinal full stall type white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe which shall be measured & paid separately)

S&F in repairs CP urinal spreader fixed to wall with brass chromium plated screws complete all as specified and directed.

S&F in repairs for PVC low level flushing Cistern white with Twin flush fittings 10 ltrs capacity with all internal accessories & fixed to wall & making good to wall surfaces including taking down existing flushing cistern complete.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F 110mm PVC (SWR) WC connector with lip ring all as specified and as directed.

S & F 110mm PVC (SWR) WC connector bent type to fit WC outlet all as specified and as directed.

S & F 110mm PVC (SWR) junction single, (Single T) equal or unequal all as specified and as directed.

S & F 75mm PVC (SWR) junction single, (Singlet T) equal or unequal all as specified and as directed.

S & F in repair vitreous china Wash hand basin,white, table top, size 550x400 mm except taps, CP waste coupling with fixing brackets complete all as specified. (Note:-If specified size not available in market, approx matching or next higher size as per direction of Engineer-in-charge shall be fixed without any extra cost)

S & F 32 mm dia stainless steel waste coupling for wash hand basin all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repairs bottle trap 32mm brass chromium plated for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and as directed

Demolition of reinforced cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work

M&L Cement concrete type B1 1:2:4 (20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges with using necessary form work complete.

Taking down cement plaster on brick/concrete surface including racking out joints hacking for key scrubbing down with water etc.

Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc,

M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6

S&F 40mm bore UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

M&L Rendering 5 mm thick on fair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement)

M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement)

M&L Rendering in two layer on fair faces of brick work or concrete sur-faces of wall 5 mm thick in CM 1:4 mixed with WPC as per manufacturers instructiion for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 (WPC will be measured and paid separately).

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash matching to existing of wall surface.

M& L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M & L for preparing new plastered surfaces of ceiling and applying three coats of white wash.

M & L for Complete removal of exiting treatment from ceiling and preparation of old surfaces of ceiling and applying three coats of white wash.

M&L for 15 mm thick plaster in sunken portion with CM 1:3 mixed with water proofing compound as per manufacturers instruction and should be even and smooth without using extra cement all as directed. Note . (WPC will be measured and paid separately).

M&L for providing & laying applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.40 Ltrs/Sqm, 3 mm thick APP modified polymeric membrane of weight of 3 kg/sqm with non-woven polyester reinforcement shall be laid over a coat of bitumen S-35 grade (30/40) applied @1.20Kg /Sqm (minimum) with minimum 75 mm side overlaps and minimum 100 mm end overlaps, joints & overlaps shall be sealed as per manufacturer instructions in sunken portion complete all as specified and as directed.

M&L for sunken portion filled with lean concrete 1:5:10 using brick/lime aggregate and finish the surfaces rough to receive sub base complete all as specified and as directed.

S& F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided.

M & L for 75 mm thick PCC 1:3:6 mix type C2 using 40mm graded stone aggregate as in paving finishing concrete surface (plinth protection) even and smooth without using extra cement.

Supply only Integral waterproofing compound

S&F in repairs grating 150mmx150mm made out of stainless steel complete all as specified and directed.

M&L mild steel precast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for cover slabs of man holes with plain faces including necessary formwork, placed in position and set in CM (1:6) complete all as specified and directed. Note : Reinforcement shall be measured and paid separately.

S & F for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L for preparation of new surfaces of steel and providing 2 coat of Synthetic enamel paint over one coat primer n.exc 10cm in girth complete all as specified and directed.

M & L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework (caging) of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

M &L for preparation of new painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and M&L for applying two coat of synthetic enamel paint over one coat of redoxide primer all as specified and directed by Engr-in-Charge.

M&L mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm diameter.

Excavating in posts holes (or similar holes) in hard/dense soil each n.exc 0.50 cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm watering, and removing surplus soil to a distance n.exc 50m and making good surface, complete all as specified and directed

M/L for providing PCC 1:3:6 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete,complete all as specified and directed.

S & F mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified.

S&F Green PVC coated Chain link fencing of mesh size 50x50mm , diameter of wire not less than 2.5mm and coating of pvc is not less than 1.0mm and weight not less than 2.0Kg/Sqm complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking endss and binding with MS wire 0.9 mm dia annealed all as specified confirming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165),complete all as specified and directed.

M &L for Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, ach screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10cm long complete all as specified and directed.

M& L for hard core of broken stone guage exc 63mm but n exc. 100 mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface , complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as 75mm thick finished fair as in sub base of interlocking paver block complete all as specified and directed

M&L Sand Filling a layer of 25mm thick sand cushioning including filling the joints with sand as in floors/ paths including watering and consolidation complete all as specified and directed.

M&L for 60 mm thick, machine made ,1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks , of triangular / Zigzag / Haxagone/ I , in shape or shap and design as approved, with grey cement and pigment , having M-35 Grade and conforming to IS 15658-2006 specifications , complete all as specified and directed.

M&L for factory made precast machine pressed kerb stones of PCC grade M-15 design mix and of shape and size rected, set jointed and pointed cement and sand mortar 1:4 fixed in repairs with and including necessary excavation and earthwork and making good the disturbed surfaces to match with the existing surfaces including removal of dispodal of rubbish complete all as specified and directed. Sizes shall be as under :- Length (L) not less than 300mm, Height (H) 300mm to 350mm, Thickness (T) 100mm and radius (R) 75mm including painting on kerb stone of synthetic enamel paint yellow or white colour complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing from site all as specified.

M & L for 150mm thick plain cement concrete (1:4:8) type D-2, using 40mm graded stone aggregate as in sub base complete, all as specified & directed.

M & L for Filleting in any position and to any shape n.exe 25 sq cm in cement mortar 1:4 including all mitres, stops, etc

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc.

Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity.

M&L for concealed point wiring with 1.5 Sqmm PVC-FRLS insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes with modular white cover plate and frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete incl cutting and chasing in stone/brick masonry and making good disturbed surface all as specified and directed by Engr-in-charge for the follwings:-

For one light, fan point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per item No 107 here-in-before above but for power point wiring using with 2.5 sqmm PVC-FR LS insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed by engir in charge

S&F Modular switch, one way, 6 Amp 230, 1 module.

S&F socket Modular 6 Amp-2/3 pin combined 2 module.

S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt.

S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt.

S&F ceiling rose, surface backlite, three terminal.

S&F Modular lamp holder insulated with back plate suitable for Angle/Batten fitting all as specified and directed by engir in charge

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs.all as specified and directed by engir in charge

S&F testing and commissioning of MCB SPN 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs.all as specified and directed by engir in charge

S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 4 way, 240 V with 200 Amps rated bus bar of suitable size.

Supply and fixing LED TL fitting 20 watt for surface and wall mounted LED batten with extruded aluminium housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires aluminium housing in opeal finish coverwith high brightness . Make ORIENT Cat Part NoLBLN-20-C-AL or Bajaj cat part No BCLAB 20W LED P or CG Cat par No CCS-103-20-65-HL1-DP-NWH

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

M&L concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit size not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge

S&F LED bulb 10 watt suitable for angle / batten holder fitting.

Supply & fixed in replacement exhaust fans AC single phase 230/ 240 V of size 300 mm sweep mettalic body with louvers all accessories including making hole in stone /brick wall grouting &making good in all respect all as specified and directed. Note : Old unserviceable Exhaust fans shall be deposited to Mes store yard.

Shree Vaishno Enterprises (BID ID -3277439)

City Light (BID ID -3272660)