REPAIR REPLACEMENT OF STREET LIGHT AND CONNECTED WORKS IN ORA AMBC TRG AREA SQUADRONS AND ETTIKULAM AREA UNDER GE MAINT EZHIMALA

Amount

Notes:- a) Contractor has to provide one electrician and one helper each day including sunday and holidays to collect complaints from complaint cell/ JE E/M / AGE E/M and rectify the same within 48hrs(two days) otherwise recovery will be done Rs. 1000 per complaint per day delay. b) Contractor has to maintain complaint slip/register and record day to day complaints and after rectification has to get signature of user/JE E/M on daily basis. c) Contractor has to provide necessary safety equipments and will be fully responsible for any incidents occuring on site. d) Contractor has to visit the site before quoting the tender. e) contractor has to provide proper ladder arrangement to work on any height street light pole. f) If contractor failed to provide electrician to attend complaint or absent to attend complaints then recovery will be done Rs 2000 per day.

M&L for taking down the unserviceable LT UG cable of size of 6sqmm to 16sqmm 4 core including removing electrical connection and keeping side serviceable cable, removing cable protection cover etc complete all as specified and as directed.

Exacavation in trenches not exceeding 1.5 mtr in width and depth and getting out in hard/dense soil all as specified and as directed by Engr-in-charge. Notes:- a) For all items involving excavation work contractor has to obtain prior approval from station HQ to avoid loss of other co existing utility services, in case of damage to any property he would be liable for its rectification. b)The excavation has to be done manually only.

Returning and filling in including levelling watering and well ramming into layers not exceeding 25 cm in hard/dense soil complete all as specified and directed by Engr-in-charge.

Removing excavated soil to a distance not exceeding 50 mtrs and depositing at a level not exceeding 1.5 mtr from starting point complete all as specified and directed by Engineer-in-Charge.

Supply and spreading riddle earth for cushioning and covering of the UG cable in trenches complete all as specified and as directed. Note:- Punned thickness shall be measured for payment purpose.

Supply and lay PCC un reinforced LT cable cover of size 250 mmx 150mmx40mm , class LV type I flat for cable protection complete all as specified and as directed.

Relaying of PCC un reinforced LT cable cover of size 250mmx 150mmx40mm item obtained from ser no 2 complete all as specified and directed by Engr in charge.

Relaying cable XLPE insulated heavy duty galvanised steel strip armoured LT 1100 volt grade with aluminium conductors multistranded confirming to IS laid in trenches/pipes/wall size upto 16 sqmm 4 core item obtained from ser no 2 complete all as specified and as directed.

Supply and laying LT cable in trench/fixing to walls/pipe/pole with proper saddles, lugs, glands XLPE insulated heavy duly galvanised steel strip armoured LT1100 volt grade with aluminium conductors of size 16 sqmm 4 core complete all as specified and as directed.

All as per item no.10 above but size of 10 sqmm 4 core complete all as specified and as directed.

Supply and laying LT cable in trench/fixing to walls/pipe/pole with proper saddles, lugs, glands XLPE insulated armoured cable with copper conductors of size 2.5 sqmm 3 core complete all as specified and as directed.

M&L for mass filling in foundation/coping/wall with PCC 1:3:6 using 20 mm graded aggregate type C1 as site requirement complete all as specified and directed by Engr in charge.

M&L for dismantling/removal of existing pole of post top lantern of any type from it's position/foundation after necessary exavation and earth work and refixing on site complete all as specified and as directed.

M&L for cutting the existing road/hard standing made of concrete or premix carpet, WBM, soling and moorum filling including excavating for laying the cable/pipe, width 0.5 Mtr and depth 0.7 Mtr all as directed and making good the road/hard using pre mix bituminous as required at site to match with the existing surface all as specified and directed by Engr-in-charge. Note:- Before using the hand drilling/ breaker machine diamond cutter will be used all as directed by Engr-in-charge.

Supply and fix in replacement of GI tubing light grade 50 mm nominal dia in trench/road/pole for cable protection complete all as specified and as directed.

All as per item no.16 above but size of 40mm nominal dia complete all as specified and as directed.

Supply and fix in replacement of copper cable flexible 1.5 Sqmm 3 core 230 Volts complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement of digital time switch programmable type, two module complete all as specified and directed by Engr in charge. Make:- L&T Model No:- 67DDT0 or equivalent in Havells/ C&S/ ABB.

Supply and fix in replacement of contactor four pole 415 volt 63 Amp capacity complete all as specified and directed by Engr in charge. Make:- L&T Model No/Type: MCX 12 or equivalent in Havells/C&S/ Schneider.

Supply and fix in replacement of post top lantern having opal acrylic and spun aluminium reflector with high power LEDs as light source having 40 watt capacity, 440V, 50Hz, IP 65 rated ,with 5Kv SPD included and PF above 0.95 suitable for pole dia upto 60 mm complete all as specified and directed by Engr in charge. Make:- Crompton Cat part no.LPTO-40-CDL or equivalent in Havells/ Philips/Wipro/Bajaj. Note:- LM79 report by NABL accredited lab has to be submitted.

Supply and fix in replacement bollard light fitting tulip/robust type LED bollard light fitting made out of die cast aluminium with soft 360 light ouput and 10W capacity, CCT 3000k/5700k with IP 65 proctection complete all as specified and as directed by Engr-in-charge. Make:- Crompton Cat part no.LBLTW-10-WW or equivalent in Havells/ Philips/Wipro/Bajaj. Note:- LM79 report by NABL accredited lab has to be submitted.

Supply and fix in replacement of old unserviceable street light fitting with LED street light fittings on poles of any height upto 11m using proper ladder arrangements, LED street light luminaire must have following specifications: minimum 60 watts capacity ,240V, 50Hz made out of pressure die cast hosuing, IP 66 rating, efficacy above 120 Lm/W, 10kv surge protection a 5700K complete all as specified and as directed. Make:- Bajaj Cat Part No.Enxt P 72L WH CR PC SD or equivalent in Crompton/Havells/Philips. Note:- Necessary fixtures needed to fix the street light fitting in pole of any dia has to be included in the quoted rate. LM79 report by NABL accredited lab has to be submitted.

Supply and fix in replacement of old unserviceable street light fitting with LED street light fittings on poles of any height upto 11m using proper ladder arrangements, LED street light luminaire must have following specifications: minimum 90 watts capacity, 240V, 50Hz made out of pressure die cast housing, IP 66 rating, efficacy above 120 Lm/W, 10kv surge protection a 5700K complete all as specified and as directed. Make:- Bajaj Cat Part No.Zela P 108L WH PO TG SD or equivalent in Crompton/Havells/Philips. Note:- Necessary fixtures needed to fix the street light fitting in pole of any dia has to be included in the quoted rate. LM79 report by NABL accredited lab has to be submitted.

Supply and fix in replacement of post top lantern,made of spun aluminium die cast material, energy saving, enviormental friendly with high power LEDs as light source of 20 watt capacity warm white/ CDL, IP 65 rated protection suitable for pole dia of upto 60 mm complete all as specified and directed by Engr in charge. Make:- Bajaj Cat Part No:- BGCTNP 20W LED WH or equivalent in Crompton/ Havells/Philips.

S&F in replacement of die cast aluminium IP 66 rated 120 W LED flood light luminaire on poles / buildings of any height using proper ladder arrangements with system efficacy above 120Lm/W and with 10KV surge protection device complete all as specified and directed by Engr in charge. Make:- Bajaj Cat Part No: Praze F144L WH NB a5 TG SD or equivalent in Crompton/Philips/Havells.

S&F in replacement die cast aluminium IP 66 rated 80 W LED flood light luminaire on poles/ buildings of any height using proper ladder arrangements with system efficacy above 120Lm/W and with 10KV surge protection device complete all as specified and directed by Engr in charge. Make:- Bajaj Cat Part No: Praze F96L WH NB a5 TG SD or equivalent in Crompton/Philips/Havells.

Supply and fix in replacement of bracket made out of GI pipe medium grade, 50 mm dia, 90 cm long for fixing street light with and including clamps, nuts, bolts, washers complete accessories and applying two coats of oil painting over one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L for taking down the defective security light fittings /street light fittings of any type from 11/10/8.5 Mtr Swan neck type pole and refixing in same position after carrying out necessary repair work/replacement of burn out parts and cleaning the fittings completely including replacement of minor burnout spares such as connectors/clamps/wire etc complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement of weather proof street light junction boxes made out of thermo plastic consisting of 4 nos of connectors of capacity 40 amp 415v and 1no of SP MCB rating 6 AMP 240 V with proper closing arrangement, elmax connector for neutral link including pole mounting clamp with nut bolts.The box should have two cable entry and should be able two accomodate two cables of size 25Sqmm with proper space between each phases complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of LED bulb B22 Type 09 Watts in gardern lights/ dome lights after removing the outer cover and refixing the same after replacement complete all as specified and directed by Engineer-in-Charge. Make:- Havells/Philips/Bajaj/Wipro/Crompton

M&L for scrapping out faded / rusted old paint from street light pole of 9m height using wire brush, emery paper and prepairing surface for painting applying one coat of aluminium paint on poles including cross arms, bolts and nuts, anti climbing device etc and writing existing pole number with black paint over a yellow base and painting of coping/base using white cement paint complete all as specifed and directed by Engineer-in-Charge.

M&L for scrapping out faded / rusted old paint from decorative PTL double arm/single arm pole of height upto 3.5m using wire brush, emery paper and preparing surface for painting, applying one coat of alluminium paint on poles including cross arms, bolts and nuts etc and writing existing pole number with black paint over a yellow base and painting of coping/base using white cement paint complete all as specifed and directed by Engineer-in-Charge.

M&L for welding of double arm decorative poles at joints by removing rusts from existing poles and patching of holes and making the surface even and jointing the arms using nessecary fixtures using welding or bolts and nuts complete all as specified and directed by Engineer-in-Charge.

M&L for repairing of garden lights by removing defective garden light fitting and refixing the same after doing minor repairs such as cleaning, tightening loose connections, re aligning and replacing burnout lamp holder /connectors complete all as specified and directed by Engr-in-charge.

Sreekrupa Enterprises

Neptune Engineers and Builders

JEETH CONSTRUCTION