PETTY B/R REPAIRS FOR DAY TO DAY MAINTENANCE COMPLAINTS TO OMQs AND SMQs IN SECTOR 28, 31 AND 47 UNDER GE (AF) MC CHANDIGARH

Amount

S&F 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms, fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms), fixed in repairs complete all as specified and directed by Engr-in-charge.

Repairs to leaking water in pillar tap, stop cock, angle valve, bib taps of any description by replacing the washer etc complete all as specified and directed by Engr-in-charge.

Repair to leaking of pipes /fittings with M-Seal at any height and in any position complete all as specified and directed by Engineer-in-Charge.

S&F Phase for 15mm brass or CP brass stop cocks, bib taps ,wall, sink and wash basin mixer etc, fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F to walls/chases/ceiling or laying in floor polyethylene-aluminium polyethylene (PE-AL-PE) composite pressure pipes including all crimp type internal sealing plansticmetal composite fittins (such as elbows, tees, reducers, couplers, shorf pieces, connectors, etc.) and hooks (in case of cancealed pipe work/clamps in case of exposed pipe work) complete of pipe size 1216 (outside dia 16 mm) including repairs to disturbed portions to match with the existing surfaces however, glazed tiles if any, will be paid seprately complete all as specified and directed by Engr-in-charge.

All as per item No 6 here-in-before but of size 1620 (outside dia 20 mm)

S&F PE-AL-PE fittings Female Tee, equal Tee,equal union, Female Elbow , reducers as independent unit 1216 (for 16 mm outside dia) including repairs to the distsurbed portion if any complete all as directed by Engr-in-Charge.

All as per item No 8 here-in-before but 1620 (for pipe 20 mm outside dia)

S&F Ball valve PVC for PVC 15mm bore for low level flushing cistern, fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F PVC handle/ push button incl lever for low level flushing cistern, fixed in repairs complete all as specified and directed by Engr-in-charge.

Repair/Adjustment to washer /siphon etc for high or low level flushing cistern any type any make including replacement of washer, check nuts, plug and making it functional complete all as specified and directed by Engr-in-charge.

S&F Siphon for low level flushing cistern of any type and make of cistern fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F Small fittings galvinised iron medium grade such as socket, elbow, nipple, Tee, reducer,sockets, union, tank nipple,water meter coupling etc for 15mm bore pipe fixed in repairs complete (Larger bore shall taken into account) complete all as specified and directed by Engr-in-charge.

S&F Small fittings galvinised iron medium grade such as socket, elbow, nipple, Tee, Reducer, Sockets, union, tank nipple, water meter coupling etc for 20mm bore pipe fixed in repairs complete (Larger bore shall taken into account) complete all as specified and directed by Engr-in-charge.

S & F Vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), including 100mm CI 'P' or 'S' trap set in and including concrete fixed in repair complete all as specified and directed by Engr-in-Charge.

S&F Waste coupling of brass Chromium plated (half or full threaded) 32 mm bore for sink fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F Waste coupling of brass Chromium plated (half or full threaded) 40 mm bore for sink fixed in repairs complete all as specified and directed by Engr-in-charge.

Re-fixing of Plate rack/WHB/Cistern/Sink of any description and any size in repairs complete all as specified directed by Engr-in-charge.

S&F Extruded aluminum alloy handle, fabricated type, anodized 125mm size, fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F Aluminum, anodized, barrel tower bolts of extruded section 200 mm long, fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F Stain less steel sliding door bolt 300mm long, with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of MS, fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F Butt hinges medium weight, cold rolled mild steel 100mm size, fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F Hasp and staple 125mm size, safety type, aluminium anodised including bolt to hinge plate, fixed in repairs with screws complete all as specified and directed by Engr-in-charge.

S&F Mild steel pressed handle oval type, stove enameled black 125 mm size fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate, fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F floor door stopper of Aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm complete all as specified and directed by Engr-in-charge.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples, complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete all as specified and directed by Engr-in-charge.

S&F sheet glass 4mm thick, ordinary quality and glazing with oil putty in square of any size pane complete all as specified and directed by Engr-in-charge.

S&F Glass Sheet 4 mm thick pinhead , glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engr-in-charge.

Welding at site in repairs exceeding 2.5 cm but not exceeding 5 cm in length & thickness of metal to be welded n.exc 6 mm thick complete all as specified.

S & F Aluminium anodized Peg set of Six & fixing it with screws complete all as specified & directed.

S & F PVC Smart Shelf above WHB with screws complete all as specified & directed. Make :- Prayag Cat no. 190 or equivalent approved by GE

S&F Door seal strip with plastic beading not exceeding 1 mtr length fixed in repair complete all as specified and directed by Engr-in-charge.

S & F mortice lock, vertical type size 100 mm brass 6 lever in repair complete all as specified and directed by Engr-in-charge.

S & F 25 mm dia SS drapery rod in reapir incl all fittings like finel,brackets,holders etc complete all as specified and directed by Engr-in-charge.

Filling of white or coloured cement to match the colour of tile in hungry joints of glazed tiles not exceeding 1.0 RM each complete all as specified and directed by Engr-in-charge.

Demolition of lime concrete / lean concrete /Brick bats etc. from sunken slab portion exc. 15 cm thick but above ground floors, complete all as specified and directed by Engineer-in-charge including removal of demolished material from MD land debrish away from site to a disignated point by local administration or a distance up to 1.5 km from site complete complete all as specified and directed by Engr-in-charge.all as specified.

M&L lean concrete type E-2 (1:5:10) using 40mm bricks bats aggregate as in sunken portion complete all as specified and directed by Engineer-in-charge.

M & L for 40mm GI medium grade Spout pipe for sunken work complete.

M&L for providing water proofing tratment of sunken portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make as approval in Technical Instruction 5/2003 by adding: (a) 15mm thick plaster (1:4) cement sand mortar with integral water proofing compound 2% by weight of cement on floor and wall / beam , finishing the surface even and smooth without using extra cement. The surface shall then be cured and allwed to dry. (Note: Water proofing compound shall be measured and paid separately). (b) First layer of slurry of cement @ 0.5 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.25 kg/sqm. This layer will be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @0.25 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.15 kg/sqm. This layer will be allowed to air cure for 4 hrs followed with water curing for 48 hrs. complete all as specified and directed by Engineer-in-charge. NOTE : Floor area of the sunken slab shall be measured only. Make of Acrylic based polymer modified cementitious compound - Fosroc ( Brushbond) /Sika (Sikatop-100)/Pidilite

Supply only water proofing compound ISI marked complete all as specified and directed by Engr-in-Charge.

S&F in repair 100 mm dia cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall , laid in trenches or in floors, complete all as specified and directed by Engr-in-charge.

All as per item No. 45 here-in-before but 75 mm dia.

Fixing only in repair 100 mm dia cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall , laid in trenches or in floors, after necessary cleaning complete all as specified and directed by Engr-in-charge.

All as per item No. 47 here-in-before but 75 mm dia.

S&F 100 mm dia cast iron bends complete all as specified.

S&F 75 mm dia cast iron bends complete all as specified.

S & F Branch pieces, single (equal or unequal),ordinary or inverted(spigot or socket type)or with parallelbranches 100 mm dia complete all as specified and directed by Engr-in-charge.

S & F Branch pieces, single (equal or unequal),ordinary or inverted(spigot or socket type)or with parallelbranches 75 mm dia complete all as specified and directed by Engr-in-charge.

S&F in repairs 75 mm dia cast iron Floor Trap/Nahani Trap ,with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F in repairs 100 mm dia cast iron Floor Trap/Nahani Trap ,with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

Fixing only in repair 100 mm dia cast iron bends/Tee/cowls after necessary cleaning complete.

All as per item No. 55 here-in-before but 75 mm dia

M & L for Cutting holes into or through brick walls built in cement mortar or cement lime mortar having superficial area not exceed 150 Sqcm each. making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1.

Cutting of bushes /peepal small tree protuding over wall survace/Roof surface/terrace of building of height upto up to 10.0 mtr. Including necessary scaffolding and necessary safety measure if required and make good the surface in cement mortar (1:3) and applying one coat of anti growth of vegitation chemical as directed by Engr-in-Charge and removing of unserviceable material out side MD land and cleaning site , complete all as specified and directed by Engr-in-Chargeremoving of unserviceable material out side MD land and cleaning site complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) pipes 110mm dia Single socketed, in any length with rubber ring joints fixed to walls , laid in trenches, floors.etc complete all as specified and directed by Engr-in-charge.

S&F in repair for 110mm PVC (SWR) T equal and unequal complete all as specified

S&F in repair for 110mm PVC (SWR) bends any radius complete all as specified

S&F in repair PVC (SWR) pipes 75mm dia Single socketed, in any length with rubber ring joints fixed to walls , laid in trenches, floors.etc complete all as specified and directed by Engr-in-charge.

S&F in repair for 75 mm PVC (SWR) T equal and unequal complete all as specified

S&F in repair for 75 mm PVC (SWR) bends any radius complete all as specified

Taking up or down GI steel/ Kitek tubing 15 mm with connections or fittings from wall, ceiling, floor etc

Taking up or down GI steel/ Kitek tubing 20 mm with connections or fittings from wall, ceiling, floor etc

S & F GI water tubes, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed by Engr-in-charge.

Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor or fixed to wall.

S & F GI water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed by Engr-in-charge.

Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exc 10 cm but not exc 20 cm girth

Taking down cement plaster of any description on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water, etc , complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 15mm thick in cement mortar 1:4 on brick work, concrete, R.C.C. Surfaces on mumty , parapet or similar surfaces at any height finished even and fair without using extra cement of ,up to height 12 mtr , complete all as specified and directed by Engr-in-Charge.

M&L Rendering 15mm thick on brick surfaces of wall in cement mortar (1:6), finished even and smooth without using extra cement, cement plaster and racking out joints, hacking for key scrubbing down with water etc , complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 10 mm thick in cement mortar (1:4) on ceiling, parapet, chajjas, facias of building and finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-In-Charge. .

M&L preparation of new plaster surfaces and applying two coat of oil bound distemper white or tinted complete, all as specified and directed by Engr-in-Charge.

M&L for preparation of new plaster/un treated surface of wall / coloum ,beam , chajja etc. and leveling / edgesing the disturbed surface a thin layer of putty and making smooth by using sand paper applying two coat of extrior acylic emulsion (weather proof treatment) , to be applied using an airless spray machine, complete all as manufacturer,s instruction and as directed.

M&L prepration of new surface of ceiling and applying two coat of oil bound distemper white or tinted complete all as specifeid and directed by Engr-in-Charge.

M&L for , Ist quality Glazed ceramic coloured tiles in vertical surface 300mmx450mm 8mm thick as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10 mm thick for wall finished in cement mortar 1:4 , including dismantaling floor hearth or wall tiling incl cement mortar bedding ( but not backing ) including removal of debris away from site to a point disignated by local administration outside defence land complete complete all as specified and directed by Engr-in-charge. Note : - Contractor will produce test certificate of the company.

M&L for Ist quality Non-skid Ceramic coloured tiles 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 thick screed bed in cement mortar 1:6 and dismantling of existing tiles including cement mortar bedding including removal of debris away from site to a point disignated by local administration outside defence land complete all as specified and directed by Engr-in-charge. Note : - Contractor will produce test certificate of the company.

M & L Ist quality Non - skid Ceramic coloured tiles 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 thick screed bed in cement mortar 1:6 and dismantling of existing tiles including cement mortar bedding including removal of debris away from site to a point disignated by local administration outside defence land complete all as specified and directed by Engr-in-charge. Note : - Contractor will produce test certificate of the company.

S&F in repair of vitreous china One piece EWC standard size wall hanging/floor mounted white/ivory colour with dual flusing cistern white including CI "P" or "S" trap, fixed as complete all as specified and directed. Make : Parryware/Cera/ Jaquar etc.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) including connection to drain and flushing pipe antisyphonic pipes etc.

S&F PVC syphonic action type flushing cistern 10 lts capacity, low level (ISI marked) with inlet, ball valve float and bracket with complete fitting complete all as specified and directed.

S&F in repair 15 mm fancy type Stop valves cast copper alloy chromium plated with long shank and Cup ( Concealed Type) screwed down high pressure with crutch both ends for iron pipes or for union and fixed.

S&F 15 mm fancy type Stop valves (angle valves) cast copper alloy screwed down high pressure with crutch both ends for iron pipes or for union and fixed in repair.

S&F 15 mm Bib taps long body (Fancy type) cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore fixed in repair.

S&F Bib taps short body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore, fixed in repairs.

S&F in repairs 15 mm brass chromium plated mixer for mixing Hot and Cold water screwed down for iron pipes for complete all as specified and directed.

S&F in repairs 15 mm brass chromium plated centre hole WHB mixer for mixing Hot and Cold water screwed down for iron pipes.

S&F in repairs Vitreous china wash hand basin ,flat back size 550 mm X 400 mm including Bracket cutting in wall and pinning in ends of bracket or erecting stand with PCC 1:2:4 Type B1, including waste coupling and waste pipes.

S&F in repair PVC connection 15 mm size with PTMT nuts of lengh 450 mm long.

S&F in repairs 15 mm dia Fancy type Pillar Taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or with out lettered Hot and Cold with long screwed all as directed by Engr-in -Charge.

S&F in repairs health faucet brass chromium plated with hook stand Roman 2 In 1 Faucet 1.5 Metre length complete all as directed by Engr-in -Charge.

S&F Flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, fixed in repairs complete all as specified and directed by Engr-in-charge.

S&F in repairs Plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.

S&F in repairs Chromium plated shower roses swivel shower brass chromium plated with arm 100 mm size for fixing with 15 mm pipes with swivel joints, any size including fixing to steel pipes or union.

S&F Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, fixed in repairs complete all as specified and directed by Engr-in-charge.

S & F PVC Bath Room cabinet (standard size - with looking mirror & shelves fixed in repair complete all as specified and directed by Engr-in-charge.

S&F Grating doom 125 mm dia with or without or without waste hole of chromium plated fixed on floor/nahani trap with cement mortar, fixed in repairs complete.

S&F PVC waste pipe 32mm dia, complete with 80 cm long flexible for WHB fixed in repairs complete all as specified and directed by Engr-in-charge.

All as per Item No. 101 here-in-before but 40mm dia for sink.

Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thickness (Below or above ground level) complete removing out site of defence land, complete all as specified and directed.by Engr-in-charge.

M & L for 75mm thick cement concrete type B- 1, 1:2:4 (20mm graded crushed stone aggregate) as in flooring laid in slope and alternate bays, complete all as specified and directed by Engineer- in-charge.

Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc., complete including removing the waste materials to a distance of 500 meters complete all as specified and directed by Engr-in-Charge.

M&L Brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius in cement mortar 1:4 for working height up 03 storeyed building complete all as specified and directed by Engr-in-Charge.

All as per item No. 106 here-in-before but except bricks.

S&F Triple layer rotational moulded polyethylene water storage tank (Cylindrical vertical with threaded closed top), HDPE, white colour with ISI marked of 500 ltrs capacity with inlet & outlet connections, including 20mm dia PVC float valve with ball & all fittings, tank nipple with washer & plug , with tank lid having locking arrangement hoisted and fixed in position complete all as specified and directed including dismantling existing water storage tanks (RCC/PVC) of capacity upto 500 litre.

S&F Triple layer rotational moulded polyethylene water storage tank (Cylindrical vertical with close top), HDPE, white colour with ISI marked of 1000 ltrs capacity with inlet & outlet connections, including 20mm dia PVC float valve with ball & all fittings, tank nipple with washer & plug , with tank lid having locking arrangement hoisted and fixed in position complete all as specified and directed including dismantling existing water storage tanks (RCC/PVC) of capacity upto 1000 litre.

S&F in repairs Ball valves high pressure PTMT ISI marked, with epoxy coated alluminium rod and high density plastic ball screwed for iron pipe of 15 mm bore (minimum weight 142gm) fixed in repair complete all as specified and directed by Engr in Charge.

S&F in repairs Ball valves high pressure PTMT ISI marked, with epoxy coated alluminium rod and high density plastic ball screwed for iron pipe of 20mm bore (minimum weight 210gm) fixed in repair complete all as specified and directed by Engr in Charge.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, 15 mm bore screwed both end for iron pipe , and fixed in repairs complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, 20 mm bore screwed both end for iron pipe , and fixed in repairs complete all as specified and directed by Engineer-in-Charge.

S&F sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers and cp waste coupling and 40 mm PVC waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever 03 nos brackets of angle 30mmx30mm, thickness 3-4mm, 500mm long with PCC 1:2:4 B0 in wall and connecting union to pipe overall size 914mm x 460mm bowl size 410mm x 330mm x 203mm fixed in repairs.

S&F in repairs Stainless steel plate rack (utensil rack) of size 900 mm x 900 mm and depth 250 mm made with 0.63 mm thick stainless steel sheet provided with brass screwes including necessary fittings, nut/ bolts.

M&L for disconnecting of PVC tank of capacity 500 Ltrs & upto 1000 Ltrs for tank cleaning all as specified and directed :- a) Dewatering & removing all settled silt, scale & dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hour. b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank d) Refixing the tank in same position or raised/lower height after cleaning or water proofing treatment (as may necessary) complete all as directed by Engr-in-Charge. Note : - Water proofing treatment, PCC bench, pipes if required to be replaced shall be measured and paid separately under relavent items.

Demolition of RCC of roofs, floors (other than ground floors), beams staircases, landing, chajjas, chimney and similar suspended work at any height complete all as specified and directed by Engineer-in-Charge.

Formwork to chullah hoods, chajjas,facia, troughs and similar, items in cluding edges,including stagging and scafolding up to 10 mtr heights, complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced cement concrete (Nominal mix) 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in chajjas, facia etc shelves and the like, at any height, complete all as specified and directed by Engr in Charge.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-Charge.

M&L for Roof/Chhajja trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) , fixed with using dead fastern of 150mm long , including distance pieces, cleats etc., specified and directed by Engr-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet ( any shape) 0.50 mm thick of any colour having tensile strength of 550 Mpa (AZ -150) as in roof covering/cladding to wall, fixed with self tapping screws as specifie and directed by Engr in Charge.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet ( any shape) 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ -150) as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling of precast cement concrete louvres and jallies from shaft portions, any thickness up to height 10 mtr ,including necessary scafolding/form work etc, complete removing out site of defence land, complete all as specified and directed.

Note :- Amount of credit of Rs. 69360.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s Bhagwati Enterprises (BID ID -3195267)

Havish Construction (BID ID -3199551)

SAMYAL ASSOCIATES (BID ID -3195647)

MS FUTEC ENGINEERS (BID ID -3202881)

B N FRIENDS AND CO (BID ID -3199068)