Supply, installation, testing, commissioning of mono block, 02-pole 03-phase priming pump at Lift Irrigation scheme Zandbatti.

Amount

Providing, installation, testing & commissioning of monoblock, 02 pole primimg pump coupled to 3-phase A.C. induction motor on a common base frame. The technical specifications of the pump shall be as under:- Technical Specifications:- I. Capacity = 6.4 to 14.3 LPS II. Size = 80 x 65 mm III. power rating = 05 HP IV.Type = Self priming, horizontal shaft disposition V.Head at rated capacity = 16M to 28 M VI. Speed = 2800 RPM VII. voltage range = 300 to 440 V, three phase VIII. insulation = B class IX.Make = as per EOI by SE. MATERIAL OF CONSTRUCTION:- I. delivery casing = Cast iron II. Impeller = Cast iron III. Pump shaft = Carbon steel IV. Sealing = gland packed V. motor body= cast iron The job includes laying of concrete foundation block complete as per site requirement. (Note: Manufacturers test certificate is mandatory)

Providing and fitting of GI pipes for suction and delivery side including pipe fittings: 65 mm dia. B – class GI pipe for suction side---02 length, 50 mm dia. B- class GI pipe for delivery side----01 length, 50 mm brass gate valve --- 02 no., 50 mm GI pipe bends --02 no., Reducer socket 65x50 mm – 01 No., Reducer socket 80x65 mm – 01 No., CI Flanges, rubber washers, nut bolts, GI pipe union---as per site requirement.

Providing and fitting of 65 mm dia CI flanged footvalve.

Providing, fitting, testing and commissioning of 05 HP DOL strater 03-phase includung transportation, handling and labour etc of reputed make.

Providing and fitting of 04 sq mm Cu PVC wire of reputed make to be laid in polyproylene corrogated flexible conduit

M/s Sopore Engineering Works

M/s SAJID ENGINEERING WORKS