Supplying & Installtion of automation for existing SLIDING GATE & Other Civil Work At UGVCL Mehsana Campus , MEHSANA

3 Excavation for foundation upto 1.5 m depth including sorting out and 25.00 210.42 CMT

stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(A)Loose or soft soil (Manually Labour)

4 Filling available excavated earth (excluding rock) in trenches. plinth, sides of 25.00 135.56 CMT

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

5 Providing and laying cement concrete 1:4:8 (1-Cement:4-coarse sand:8- 23.00 2733.19 CMT

machine crushed stone aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in (A) Foundation and Plinth

6 Providing and laying ordinary cement concrete M200 and finishing smooth 2.50 6861.08 CMT

with,curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C work in (A) BEAMS :(iii) Having cross-

sectional area more than 0.12Sq.M and upto 0.18 Sq.M : (Note: Cement

consumption rate diff. added Rs.348.14 M150 to M 200)

7 Providing & Laying C.C. (1:1.5:3) / M20 or for plain or R.C.C. work for Road 8.00 4654.88 CMT

pavement, using 12mm. To 20mm. Size black trap machine crushed metal

including necessary centering for all sides as required , mixing the concrete

in mixer machine, ramming with Vibrator, including keeping the joints

between road panels & finishing the Honeycombed surface if any,

immediate finishing of Top layer of road with Trowel & spunch to create

anti skid hard surface with curing etc.. complete as per drawing &

specification, & as directed by E.I.C. with supply of cement by the

contractor.Note: Cement consumption rate diff. added Rs.435.37 for

ordinary concrete to M-200. ( REINFORCEMENT IF ANY WILL BE PAID

8 Compaction and finishing of cement concrete road by trimix process 70.00 51.87 SMT

providing extra labour charges for the trimix vacum dewatering service

process on cement concrete road surface by using vacum dewatering pump

floater surface vibrator including making groves and rough finish to surface

as per in including levelling the complete.

9 Providing TMT Bar FE 500D reinforcement for R.C.C. work including 350.00 76.52 KG

bending, binding and placing in position complete upto floor two level

10 Brick work using common burnt clay building bricks having crushing 9.00 3390.61 SMT

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

11 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse 18.00 348.52 SMT

sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and

finished with a floating coat of neat cement. (B) 50mm thick

12 Providing 20 mm thick double coat mala cement plaster on interior brick / 55.00 281.51 SMT

concrete work for plastering comprising of base coat of 12 mm thick

cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including scaffolding curing etc.

complete.Up To Floor Two Level

13 Providing laying (to level or slopes) and jointing reinforced concrete Light 20.00 671.19 RMT

duty non-pressure pipes I.S. class NP2 of the following internal diameter

with collars and butt ends prepared for collar joints including testing of

joints complete.(D) 300mm

14 Steel work, welded in built up sections framed work including cutting, 13.00 9018.30 Quintle

hoisting, fixing in position and applying a priming coat of red lead paint.

(A)In beams and joists, channels angles Tees, flats, with connecting plates

or angle cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and

15 Painting two coats (including priming coat) on new steel and other metal 75.00 127.76 SMT

surfaces with enamel paint, brushing interior to give an even shade

including cleaning the surface of all dirt, dust and othr foreign matter.

16 P/F Uninterupted Power Supply 2200 VA-APC 1.00 38300.00 No

17 Intalation Programming , Testing & Commissioning Sliding Gate With motor 1.00 404640.00 No

weight capacity up to 1500kgs. , Controlled board with radio receiver card

with LCD display , with safety fuse & stable relays for bull 15mtr. , with

flashing light RF trnasmeter , safety sensor , support roller XL , Tie rod for

gate fixing kit & Fixing plate , Roller Guide XL , Gate Limit Stop , existing

gate fabrication work (GATE AUTOMATION WITH AUTOMATION - BENINCA)

18 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete 60.00 692.91 SMT

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS 15658 :

2006 including 35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

A Estimated Cost Rs.

B Bidder’s Offer (+ / -) in % ------------- [B]

C Grand Total C = A +/- (A*B)]

C Grand Total C = A +/- (A*B)]

D Add 1% Welfare cess on C 1.00%

Goods & Service Tax E = (C+D )x GST% i.e. 18% as applicable on the date of

Grand Total including welfare & GST ----- F = C + D+E -------------------------------

Grand Total including welfare & GST ----- F = C + D+E -------------------------------

Final Offer (in Rs.)

Final Offer (Rs. In Words)

We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications put up by UGVCL on WEB site. I/We hereby

accept all the conditions and specifications of this tender document, and accordingly, I/We am/are willing to carry out the work at quated rate as

SIGNATURE OF CONTRACTOR Superintending Engineer

(With rubber stamp/seal of the company) Circle Office, Mehsana