RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Hopper Or Tipper ( 2 pieces ) ( Under PAC ) Make tataace Model tataace Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Type of TIPPER Garbage Tipper Garbage Tipper Type of TIPPER if other GARBAGE TIPPER * 1/6 tipper
Requiredplease declare type of Tipper
RequiredMain Engine Capacity (cc) 702 * Make of Chassis TATA ACE HT * Type of Chassis Frame ladder type frame * Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl * Type of Fuel Diesel Diesel Vehicle Emission Complaince BS IV BS IV Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 21.5 Speed
RequiredMax (Km/Hr) 60 * Max Engine Power BHP (BHP@rpm) 16 16 Max Engine Torque (N-M@rpm) 37.7 37.7 Main Engine Aspiration Natural Aspiration Natural Aspiration No. of Cylinder in Main Engine (Nos) 2 2 Fuel Tank Capacity (Ltrs) 30 30.0 Gradeability of Vehicle with load( %) 16.8 * Gradeability of Vehicle without load ( %) 18 * Ground Clearance (mm) 160 160.0 Wheel Base (mm) 2100 * Kerb Weight (Kg) 840 840.0 Gross Vehicle Weight (Kg) 1700 1700.0 No of Axle (Nos) 2 * Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) 4X2 * 2/6 Type of Front Axle and Suspension System RIGID AXLE * Type of Rear Axle and Suspension System LIVE AXLE WITH * Type of BIS MARKED Vehicle Tyre Radial * Chassis Transmission System Manual Manual Number of Speed Forward Gears 4 * Type of Steering Manual Manual Turning Radius
RequiredMin (mm) 4300 4300.0 Speed Governers No * ABS Fitted No * Front Vehicle Brake DISK BRAKE * Rear Vehicle Brake DRUM BRAKE * Type of Clutch SINGLE PLATE * Tipping Angle (Degree) 85 85 Tipper Container cap acity/Volume(cubic metres) 1.9 1.9 Certification Chassis Certification ARAI/VRDE/ICAT No. AAHN0151FO3 * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 12 * No. Of Free Service (Nos) 3 * Battery Warranty (Months) 12 * Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 * Width of Chassis (mm) 1500 * Height of Chassis (mm) 1845 * Size Of Front Tyres (mm) 145 R 12 - 8PR * Size Of Rear Tyres (mm) 145 R 12 - 8PR * Size of Wheel (mm) 145 145.0 3/6 Tipper body Pivot length (mm) 0 * Tipper body Length (mm) 2240 * Tipper Body Height (mm) 735 * Overall Height of Tipper from Ground (mm) 1510 * Body Plate Thickness (mm) 2 2 Main Frame Thickness (mm) 3 3.0 Pneumatic System No * Hydarulic System Yes * Tipping Hydraulic Cylinders(Make) DHF/KD * Hydraulic System Driven by Power Pack Unit * Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation Yes * If Yes Auxiliary Diesel Power (HP@rpm) 0 0 Auxiliary Diesel Engine Transmission FALSE * Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 0.0 No. of Cylinders in Auxiliary Diesel Engine 1012 * Tipper Container Material Mild Steel Mild Steel Thickness of sheet from tipper Collector Container Made (mm) 2 2.0 Dumping Height (mm) 1012 1012.0 Engine Oil Pressure Level Indicator in Control Panel Yes * Fuel Gauge Indicator in Control Panel Yes * Engine Cooling Liquid Temperature Indicator Yes * 4/6 in Control Panel Operating Hour Meter No * Locking/Unlocking of Tipper Discharge Container Yes * Lowering/Lifting of Tipper Discharge Container Yes * Counter Weight No * If yes Counter Weight (kg) 0 * Paint Automotive Paint * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
