Tender for establishment of Oxygen Generation Plant at Govt. Hospital Someshwar in Uttarakhand on TurnkeyBasis

Amount

Supply, Installation, Testing & Commisioing of Oxygen Generation Plant (300 LPM)

Supply, Installation, Testing & Commisioing of Oxygen Generation Plant (300 LPM)

Optional Item

Servo Voltage Stabilizer - 1 KVA

UPS - 1 KVA

Description of Work / Item(s)

Amount

Oxygen Manifold Cylinder Oxygen Manifold would be suitable to withstand a pressure of 140 Kg/Cm2and above along with high pressure copper annealed tail pipes with end Brass adapter suitable for Oxygen Cylinders and manifold. Top frame comprising of high pressure copper pipes of size 12mm I.D x 1.5mm wall thick, with high pressure brass fittings made of high tensile brass and connections through non-return values; high pressure copper tail pipes, made of high pressure copper pipe of size 7mm I.D x 1.5mm wall thick. The design of middle and bottom frames would be provided to fit both round and flat bottom cylinders safely. The manifold would be tested (hydraulically) at 3500 pig

4+4 Oxygen Manifold , High Pressure Tail Pipe with NRV

1 +1 Cylinder oxygen Emergency

Supply, Installation, Testing & Commisioing of Oxygen Generation Plant (300 LPM)

Fully Automatic Oxygen Control Panel The fully automatic control panel would be the following features: • Would be enclosed in a metal cabinet with a hinged cover. The side covers of the panel would be made of fiber glass. • Panel cover would be fitted with a lock to prevent unauthorized access can be swung open for maintenance. • Would be Fully Automatic Changeover operation and no manual action • The service gas would pneumatically operate gas change over system. • Delivery of gas through control panel would not be dependent on electricity. • Would be capable of delivering very high flow rate not less than 1300 litres per minute at delivery pressure. • Would have Visual indication of the • state of the manifold by 3 gauges within the control panel, which would be clearly visible through the transparent cover. • Would have Audio – visual alarm indication for changeover of empty cylinder bank to filled cylinder bank. • Built in transformer to ensure safe operation by low voltage. Microprocessor based alarm signal control with high ‘db’ Siren system.

Copper Piping & Fitting : All copper pipes would be Solid drawn, seamless, deoxidized, non-arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005 Pipes sizes would be used as under: Copper Fittings: Fittings would be made of copper and suitable for a stem of working pressure of 17 bar and would confirm to BS 864 with specially made for brazed socket type connections.

15mmX0.9mm

22mmX0.9mm

12mm X 0.7mm

GAS OUTLET POINTS with Probe Would have terminated properly Double locking Front Loaded which have a parking facility which also avoids interchanging of outlets and keys including all accessories .(Fully Metal Outlet))

Oxygen

BPC Oxygen Flow meter with Humidifier Bottle: • Flow meter would be Backpressure Compensated. • Flow meter would be accurate gas flow measurement and control within a range of 0-15 litres per minute. • It would meet strict precision and durability standards. • Flow meter body would be made of brass material. • Flow tube and shroud components would be made of clear, impact resistant polycarbonate. • The humidifier bottle would be unbreakable polycarbonate material and autoclavable at 134 degrees centigrade. The humidifier would have built in safety valve.

ISOLATION VALVES: LEAK CLASS Would be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for easy maintenance. ID of the copper pipe and the ball valve would have same dimensions to avoid the flow frictio

Hand shutoff valve

Area Alarm Area Gas alarm panel Six Lines, Would audio- visual alarms for each gas used on the floor and come fitted with test and mute button. Running on electricity 220V, these units are suggested to be fitted on each floor as well as areas of heavy usage. It would be fitted with a pressure gauge. It indicates low, medium & high pressure sensors. (Digital)

Area Alarm for one Line

Zonal Valve Box: An Zonal area valve box would have bellow spec. Wall mounted M.S box with powder coated & lockable . Front glass mounting easily visible & using imported brass body quarter turn ball valves Using for opening & closing position The valve box door cannot be close during valve closing position.

Zonal valve box for ONE Gas Services

Description of Work / Item(s)

Amount

Supply, Installation, Testing & Commisioing of Oxygen Generation Plant (300 LPM)

2nd Year

3rd Year

4th Year

5th Year

6th Year

7th year

8th year

9th year

10th year

PARAM MEDICAL SYSTEM

PARAM MEDICAL SYSTEM

PARAM MEDICAL SYSTEM